Hi Community,

We're pleased to invite you to the upcoming webinar in Hebrew:

👉 Maximize Your Success with InterSystems Support 👈

📅 Date & time: May 21st, 3:30 PM IDT

Hi Developers, 
We invite you to write a review on the InterSystems IRIS on Capterra. The first 100 reviewers will get a $20 USD gift card from Capterra and $25 VISA card from InterSystems for the published review!

See the rules below. 

Principle: After dividing the article uploaded by the user into sentences using Python, the embedded value is obtained and stored in the Iris database. Then, the similarity between sentences is compared through Iris vector search, and finally displayed on the front-end page.

The installation steps can be viewed in the readme file.It should be noted that the BERT model used in the example has some memory requirements.If there is a long-term stuck situation during the testing process, other models such as MiniLM (which is used in the online demo) can be considered.

The traditional use of an IRIS production is for an inbound adapter to receive input from an external source, send that input to an IRIS service, then have that service send that input through the production.

With a custom inbound adapter though, we can make an IRIS production do more. We can use an IRIS production to process data from our own database without any external trigger.

By using an IRIS production in this way your data processing tasks now get to leverage all the built in features of an IRIS production, including:

• Advanced tracking and monitoring
• Multithreaded processing for

Hi all,

I was wondering is there is already a sample of a Helm chart or better even an IKO manifest to deploy a REGISTRY and/or EDGE container to a Kubernetes cluster.

The samples I found show how to deploy to docker using docker-compose but I want to deploy into a better runtime orchestrator.
Regards Joost

We are experimenting with IIS, as the PWS will be gone in newer versions.

The code which is executed, takes 15ms to run. If we execute it through PWS (REST), there is some overhead and the total execution time is 40ms, which is acceptable. However, if we go through IIS, it takes 150ms or sometimes even more.

Both PWS and IIS are running on the same server as IRIS in this case. No optimisations have been done on IIS.

Any suggestions on where to look/what to optimize on IIS?

 In our previous article, we explored how to send emails through Microsoft 365 using the Graph API. Since then, an anonymous client reached out to me about setting up some other methods of notifications through that API. He was particularly interested in Outlook’s tasks and calendar events. 

If you still have your client ID, client secret, and application ID from the last exercise, you may continue utilizing them.We will reuse the globals we stored from before with the GetToken method.Most of the setup in Microsoft Entra will not need to be repeated.

I am trying to create my first call to our Epic FHIR Repository from Health Connect using Samples-FHIRStarter now that I have OAuth2.0 connection tested/working with our Epic Interconnect URL.

When I take a patient example from our Epic environment and test it through Data.BPL.PatientRecordCollector within the Namespace, I keep getting a 404 - File or directory not found 

as it tells me it cannot find the patient. So, I know the connection is being established, I just can't see what is being sent to Epic to see if I could test it through Postman.

So, I enabled the following in the ISCLOG,

InterSystems FAQ rubric

If you change the system date, InterSystems Data Platform (IRIS) may not start properly.

IRIS performs a journal file deletion process when it starts, but if the system date is changed, a journal file with an incorrect date is created.During journal file deletion processing, the process proceeds by referring to the information of the previous and subsequent files recorded inside the journal file.

Hi Developers,

Join us at the upcoming Developer Roundtable on April 25th at 9 am ET | 3 pm CET. 📍
We will have 2 topics covered by the invited experts and open discussion as always.

Tech Talks:
➡ Practical Usage of Embedded Python - by Stefan Wittmann Product Manager, InterSystems

▶ Recording: 

Hi guys,

I'm trying find a way to create a row with the number of each row.

For example:

In the SQL above, i want a way to create a collum with the number of corresponding row, in this case:

1

2

3

In SQl SERVER i can use FOR, RANK or ROM_NUMBER to do this, but, i can't find a way to do the same in cache SQL.

Can someone help me?

Thank you.

Hi Guys,

We are migrating from Ensemble 2018 to the latest IRIS, and while compiling we get many of these errors in our queries:

and this a sample of one our queries:
&sql(select CASE WHEN StarterKitName != "" THEN Kit->Name || ' - ' || StarterKitName ELSE Kit->Name END into :KitName from MSDS_Serenity.KitLabelAssoc where Label = :Label and Status = 1
I've also heard that the &sql syntax also has changed, I've download the How to Migrate to InterSystems IRIS but couldn't find changes related to the above? 

Thanks

I'm trying to learn M programing for an Epic db class prerequisite. They said to download the IRIS Studio software to do the testing. I'm having a very difficult time finding information the language. I'm trying to run some examples that Epic has provided (like in below) but the compiler complains that it isn't valid. Of course, it doesn't tell you why it isn't valid.

r !,"Enter the hour: ",hr  
 r !,"Enter the minute: ",min 
 r !,"Enter the second: ",sec 
 s Mtime=$$ConvertToMTime(hr,min,sec)
 w !,"Equivalent M time: ",Mtime  
 q
ConvertToMTime(h,m,s)
 q (h*3600)+(m*60)+(s)

I get these errors:

ERROR:

An updated developer preview of InterSystems IRIS 2024.2 and InterSystems IRIS for Health 2024.2 has been posted to the WRC developer preview site.  This release contains a few noteworthy changes:

• Containers – we skipped containers for the previous preview, but we’re including them this time.  In a future preview, we’re planning to switch these to use the Ubuntu 24.04 base image.
• Ubuntu 24.04 support – this preview includes support for the brand-new Ubuntu 24.04 operating system.  We will be dropping support for Ubuntu 20.04 in a later preview.
• Windows Installer upgrades – this preview

Geographic use of vector search

The basic idea is to use Vectors in the mathematical sense.
I used geographic coordinates. These are of course only 2-dimensional
but much easier to follow as vectors in text analysis with >200 dimensions.

The example loads a list of worldwide capitals with their coordinates
The coordinates are interpreted as vectors from geographic point 0°N/0 W
(some very wet spot in the Gulf of Guinea, >400 km from the African Coast)
Finding common directions from that spot is a quite theoretical case.
So adjustment to your preferred starting point is implemented.
Now finding similar 

The OpenAPI Specification (OAS) defines a standard, language-agnostic interface to HTTP APIs which allows both humans and computers to discover and understand the capabilities of the service without access to source code, documentation, or through network traffic inspection. When properly defined, a consumer can understand and interact with the remote service with a minimal amount of implementation logic. While for SOAP based APIs there is a special wizard in InterSystems IRIS that cuts down orchestrations development time, not all APIs used in integrations are SOAP. That's why @Jaime Lerga suggested to add a wizard similar to the SOAP wizard to generate a REST client from OpenAPI specification. Implementation of this idea cuts down the development time of the REST API orchestrations with InterSystems IRIS. This idea is one of most popular ideas on the InterSystems ideas. This article, the third in the "Implemented Ideas" series, focuses on the OpenAPI Suite solution developed by @Lorenzo Scalese.
 

I have just started working on cache and I am trying to push code from a tfs repo to a cache server namespace. I know that from you vscode you just can compile and that would reach the namespace. But I want this process to be automated , like a ci/cd pipeline that gets triggered only from a kube container. Is there any documentation which I can follow. We are still using cache not IRIS

At Global Summit 2024 in June, take advantage of two learning opportunities:

👩‍💻Talk one-on-one with a technical trainer to refresh your knowledge of a concept or learn about InterSystems technologies.

👨‍🎓 Meet with a learning plan consultant to discuss your training needs and see what resources are available.

Find details and sign-up information, and save your spot today!

This question originally appeared in the comments of the post: IDE platform for beginners
 

Hello All,

Visual studio code doesn't allow debugging of code or running of code as far I can see. Since I am new, could someone guide me on this. 

Thanks 

Hello!

Trying to configure tortoise GIT in Linux System

NAME="Red Hat Enterprise Linux Server"
VERSION="7.9 (Maipo)"
My steps

1. Enable [write-access](http://docs.intersystems.com/ens20151/csp/docbook/DocBook.UI.Page.cls?K…) to CACHELIB database via the Management Portal. (This is required for csp-page with settings import.)
2. Import project in %SYS:

    %SYS> do $system.OBJ.ImportDir("/arch/cache-tort-git-master/","*.xml","ck",,1)

3. Now you can disable write-access to CACHELIB.
4.

I am attempting to configure an inbound service that utilizes the EnsLib.SOAP.GenericService class. This service receives HL7-v3 content wrapped in SOAP requests. Despite reading the documentation on configuring SOAP services, I am still confused.

In my current configuration item "Fr_Centrak_RTLS", I have ‘Enable Standard Requests’ checked, ‘Pool Size’ set to 0, and the port is unspecified.

I have also configured a web application with the following details:

My challenge is determining the correct URL address for sending SOAP traffic to this service.

I have an angular UI communicating with a iris rest api. Now I need to authenticate (to federated) before accessing the UI, and for a better solution  as the users are using the healthshare clinical viewer 2023, find a way to use the clinical viewer authentication / user to go to the UI.

The angular way would be to do an angular guard and have a function 'am I authenticate to federated', but I never found a function like this and how to get my username.

At the other end, creating a csp page in my csp folder that is either
- a csp including the angular html page outside the csp folder and passing

Hi, please let me know where i find details on Objectscript internal implementation - is it an interpreted language ? - compiled into binary code (how - which compiler/toolchain ?) ? - support of LLVM ? thanks a lot Frank

I need to convert dd/mm/yyyy --> yyyymmdd

example

Input = 25/03/1988

expected Output = 19880325

Hey Community,

Play the new video on InterSystems Developers YouTube:

⏯ Container Lifecycle - When is Your App Ready to Accept Work @ Global Summit 2023

Question for folks who have connected to an External FHIR repository outside of IRIS. Within the HS.FHIRServer.Interop.HTTPOperation there is not an option to include TLS or an OAuth authentication when connecting to an external Repository. So then how is that piece done if you need to Authenticate against an OAuth Server before you are able to access the data or call the Web Services/REST calls?

I am trying to setup a OAuth2.0 configuration to connect to a server within our Network using OAuth2.0. My previous attempt worked, however forgot to capture the steps before I had whipped the System so please bear with me. 

I have an SSL/TLS Client configuration setup as we use the setup for our LDAP configuration. 

When I go through the following steps within the Terminal, I am getting the following error...

%SYS>kill^ISCLOG%SYS>set scope="openid fhirUser"%SYS>set jwt = ##class(%SYS.OAuth2.Authorization).GetAccessTokenJWT("EpicFHIRPOC","1fd8f5cc-18ee-4eff-990d-4606037b932e",scope,.properti

Hi Community,

InterSystems Certification Program officially changed exam delivery platforms from Questionmark to Certiverse on May 6, 2024. We have made this decision in hopes of providing a better experience for our certification candidates. To take an exam on this new platform, you will be required to sign in with an InterSystems account, the same one that is used for the Developer Community, Online Learning, etc. If you do not have one, please register for an account.

Find more information about Taking InterSystems Exams on Certiverse here, and reach out to certification@intersystems.com if