Hi Community,

As you may know, we successfully held InterSystems Developers Meetup in Boston at Global Summit 2019. And now it's time to find out which solutions development on InterSystems IRIS have been discussed!

Please welcome the Meetup video recording on InterSystems Developers YouTube Channel:

InterSystems Developers Meetup - Global Summit 2019

https://www.youtube.com/embed/PUnZwDxqEZM
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

2 0
0 228

I know that people who are completely new to VS Code, Git, Docker, FHIR, and other tools can sometimes struggle with setting up the environment. So I decided to write an article that walks through the entire setup process step by step to make it easier to get started.

I’d really appreciate it if you could leave a comment at the end - let me know if the instructions were clear, if anything was missing, or if there’s anything else you'd find helpful.

The setup includes:

✅ VS Code – Code editor
✅ Git – Version control system
✅ Docker – Runs an instance of IRIS for Health Community
✅ VS Code REST Client Extension – For running FHIR API queries
✅ Python – For writing FHIR-based scripts
✅ Jupyter Notebooks – For AI and FHIR assignments

Before you begin: Ensure you have administrator privileges on your system.

In addition to reading the guide, you can also follow the steps in the videos:

For Windows

https://www.youtube.com/embed/IyvuHbxCwCY
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

6 2
2 225
Article
· Sep 17, 2023 1m read
native-api-py-demo

native-api-py-demo

This is a demo of IRIS Native API for Python, which uses Python to call the Object Script method and flow the message in production. Python obtains the message after flow and the message in global, and uses ZPM Package deployment.

Firstly, we need to install the Native API package

Enter on the command line

pip install intersystems_irispython-3.2.0-py3-none-any.whl
0 0
0 220

i've noticed a strange bug in the 'problem highlighting' of VSCODE and i wasn't sure if this is a problem with the internal library definitions of iris, or with the plug-in itself.

The first line is the correct macro call, but the second one is the one throwing the error. (preprocess vs prepOrocess)

How is this syntax checker's list of strings compiled?

0 1
0 220

Hey Developers,

Please welcome the new video by @sween on InterSystems Developers YouTube:

Hands Off HealthShare Deployment Workflow with GitLab Runners

https://www.youtube.com/embed/NP_smt5UY3c
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

Gitlab Runners and InterSystems Healthshare Code Deployment and VSCode oh my. More details in this post.

2 1
0 218

Hey Developers,

Please welcome the first session from InterSystems Virtual Summit 2020:

Creating InterSystems IRIS Analytics Solutions Using Docker & VSCode

https://www.youtube.com/embed/SgEEayfME9U
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

4 1
1 217

Note: this was originally posted on June 5, 2024 but presented as being posted on May 9, 2024 so this re-post fixes the date.

Recent updates to the Intersystems Language Server introduce many significant enhancements aimed at improving developer experience and productivity. I'll talk about some of the key ones here, while the complete list, including numerous bug fixes, can be found in the Language Server's CHANGELOG.

5 1
0 216

Hi developers, 

Serenji 3.2.0, the latest version from George James Software, was released last week and our current users have been enjoying trying out the new features (which you can find more about here). 

If you're thinking about trying Serenji for the first time, we've made it easier to get set up by adding a walkthrough on the VS Code Welcome page. It takes you through: 

  • Setting up the server components.
  • Selecting a server namespace.
  • Saving and extending your workspace.
  • Requesting a debug license (don't forget we offer a free 30 day trial!) 

We've also added prompts and guidance throughout VS Code to open and add Serenji folders to your workspace and when going to run and debug code. 

This is just one of the ways we've enhanced the Serenji debugger to make straightforward and easy to use - so all you need to do is focus on your code. 

Serenji 3.2.0 Welcome Page Walkthrough

1 0
0 215

Hey Developers,

Meet the latest video on InterSystems Developers YouTube:

Configuring VS Code Workspaces for Multiple ObjectScript Connections

https://www.youtube.com/embed/CGEqFea0hh8
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

1 2
0 215

The most recent release of Serenji features our innovative gj::locate technology. It was a standalone tool we originally created for a Developer Community contest earlier this year, but we've incorporated it into our debugger after some great feedback from developers. 

It works by navigating you directly to the source of your server-side errors in just a couple of clicks - enabling you to quickly fix errors without the need to count tedious lines of code... and let's be real, who has got time for that when you're under pressure to fix this bug? 

It's simple and straightforward to use:

1. Click on the gj::locate panel in the status bar

2. Enter the ObjectScript error message or line reference from a class/.mac routine..

3. gj::locate then does the work for you by taking you straight to the corresponding line in your source code.

Easy peasy... and with time to spare to make yourself a coffee before your deadline! 

The video below shows it in action - let us know if you've already given it a go. Or, if you're interested in trying it out we offer a free 30 day trial license, just drop me a message through the Developer Community or email us at info@georgejames.com.

Serenji 3.2.0 utilising gj::locate technology

2 0
0 213
Question
· Feb 7, 2024
Error debug from VS

Hi community.

Yes, I know that there is other question "VS Code - debugging doesn't work" that is the same issue, but my IRIS instance is not using IIS.

Some times ago, I could debug without problems, but after some updates of Visual Studio, I get the following error

Failed to start the debug session. Check that the Intersystems server's web server supports WebSockets

1 3
0 212

I have a problem. Occasionally, I am getting locked out of IRIS because of password failures. However, the failures aren't necessarily related to my password. We are using VSCode, and I have installed one or two proposed APIs for use with the software (because that's just how I am; I want to learn the new stuff).

Today, I had that problem again. The step that caused the problem was most likely when I was trying to switch the branch I was using and updating within VSCode. Let's say I was switching from branch "1A" to branch "2B". When I did this, IRIS caught two password errors:

1 1
0 211

In VSCode using the InterSystems extensions, I now have an almost working environment where routines can be created or modified on disk and these are pushed to the developer's IRIS instance.

One issue I'm finding whilst testing is that if I rename or delete a routine from disk, the change isn't pushed to IRIS and I can't work out how to make this happen.

1 0
0 211

Occasionally, in VSCode, compile errors stop displaying. I'll be getting errors on compile all along (expected, and it compiles while saving using CTRL+S), until they'll suddenly stop. I haven't found any solution, including restarting VSCode and restarting my user session in Fedora. I'm running IRIS locally on Fedora and running VSCode also on the same machine. The only solution I've found is to restart IRIS. It's a solo dev environment and relatively small, so restarting isn't anything but an annoyance.

Are there any known bugs around this or any other solutions?

0 1
0 206

Thirteen years ago, I attained dual undergraduate degrees in electrical engineering and math, then promptly started full-time at InterSystems using neither. One of my most memorable and stomach-churning academic experiences was in Stats II. On an exam, I was solving a moderately difficult confidence interval problem. I was running out of time, so (being an engineer) I wrote out the definite integral on the exam paper, punched it into my graphing calculator, wrote an arrow with “calculator” over it, then wrote the result.

15 9
0 204

gj :: locate was the entry from George James Software for the Developer Tools competition back in April 2021. When an ObjectScript error is reported, gj :: locate takes the .int line location and navigates you directly to the line in the source file where the error originated. Over the past few months we've found it a very useful tool when it comes to debugging, especially when used alongside the Serenji debugger in Visual Studio Code.

Our first update, version 1.1.0, now includes support for multi-root workspaces. This enables gj :: locate to be used with every workspace folder. If your VS Code workspace has more than one root level folder, connecting to different namespaces or perhaps different servers, then gj :: locate will determine which workspace folder is current and locate the source code in that folder. If your workspace doesn't have any files open then gj :: locate will prompt you to select a folder from a pick-list.

This will particularly benefit VS Code power users who have workspaces with simultaneous connections to multiple namespaces, on multiple different IRIS and Caché servers.

If you would like to try it out then you can download it from the VS Code marketplace. Or if you’re already a user, then gj :: locate will automatically update. Let us know how you're getting on with it!

2 0
1 202

import os

# Get environment variables
db_host = os.getenv('DB_HOST')
db_port = os.getenv('DB_PORT')
db_namespace = os.getenv('DB_NAMESPACE')
db_username = os.getenv('DB_USERNAME')
db_password = os.getenv('DB_PASSWORD')

# Create a database connection
conn = irisnative.createConnection(db_host, db_port, db_namespace, db_username, db_password)

# Create an IRIS instance from this connection
iris_native = irisnative.createIris(conn)

status = iris_native.classMethodValue('%SYSTEM.OBJ', 'Load', 'Production.cls', 'ck')

0 3
0 193

If you haven’t already please give @John Murray your vote in the Developer Tool contest >> http://bit.ly/3XcxyeS


🚀 DX Jetpack boosts your developer experience when using VS Code with InterSystems platforms. 🚀


This extension pack includes:

gj :: codeSpex - showing help using VS code's commenting feature.

ObjectScript class view - View and navigate all class members plus where they are inherited from.

ServerDiff - See the difference between the code you are editing in VS Code and the server copy.

You can vote here >> http://bit.ly/3XcxyeS

1 1
0 191

So being forced to use VSCode out of the box for a new Community install I've hit a small problem, documentation hasn't helped and its a simple problem.

How do I enable auto complete and the property viewer in creating a new .MAC?

So I've created "test.mac" and 'assume' can't remember the method name to open a file (for example), typing

"s f=##class(%Library.File). " in Studio would bring up the methods of %Library.File so I could click the appropriate one, VSCode does not do this (and also didn't show the classes under %Library).

0 5
0 190

We have some custom tools that do project based deployment from environment to environment. In VS Code, we're struggling to find the best way to export PRJ files that contain the contents of a project the way we were able to in Studio. We can edit existing projects, and in server side editing we can create projects, but we can't seem to extract the project files (Not the classes, the wrapper) to store in our source control solution for deployment purposes.

1 1
1 188

Only a few days to go until the Global Summit! George James Software will be on hand to talk about any projects you may have on the horizon, such as application development, data and platform migration, system integration, training, and support – we can work with you to find practical and maintainable solutions that support the growing needs of your organization.

We're also running a User Group Session on Wednesday, July 22nd at 12pm. It's a great opportunity to find out more about our tools and ask us (and current users!) any questions.

3 0
0 186