#TrakCare

What is the difference between "Apply" button and "Update" button on an Order Item screen?  

Hi,

I need to add a large number of users to TrakCare.

Is there a programatically way of adding users to TrakCare using ObjectScript?
If so, can you please send me an example.

Thanks 

I have a question for people currently in the community who support TrakCare implementations. 

Are you all currently working through the migration from Crystal/Zen over to Logi Reports? 

What are you plans for the Zen reports you can't migration off for example the HTML letter template? 

I have spoken with a few people regarding this topic but starting to get concerned if there is a call in the near future to decommission ZEN/ 

Has anyone successfully implemented Multi-factor Authentication for TrakCare?

Hi,

I'm trying to configure iprint for trakcare.

My trakcare runs on linux IRIS(SUSE).

iprint is from MicroFocus [previously Novell]

iprint is a print facility that many printers support where there is a virtual queue for each AD user.

You can log onto any iprint printer using your AD credentials and you can access your virtual print queue. You can then physical print from that virtual queue.

Has anyone configured this for their trakcare?
In order to do this I need to:
- map each trakcare user to their equivalent AD user

- get an iprint driver

However there is no iprint driver for my Linux IRIS.

Purpose

This set of tools (RanRead, RanWrite, and the combined RanIO) is used to generate random read and write events within a database (or pair of databases) to test the IO speed of IRIS running on a specified hardware setup. While Read operations can be measured in the usual Input/Output operations per second (IOPS) since they're direct disk reads, write events are sent to the database and thus their physical writes are managed by IRIS's write daemon.

Results gathered from the IO tests will vary from configuration to configuration based on the IO sub-system. Before running these tests, ensure corresponding operating system and storage level monitoring are configured to capture IO performance metrics for later analysis. The suggested method is by running the System Performance tool that comes bundled within IRIS. Please note that this is an update to a previous release, which can be found here.

Hi

Can anyone explain how to display custom icons in a TablePane?

Andy

Hi everyone,

I have an issue when calling Trakcare's webservices using a web application.

The issue is that, the browser is blocking the queries because of the CORS Policy.

In fact, the browser is sending a first HTTP query OPTIONS called "preflight" (in Chrome's developers tools) and Apache server answers with no CORS Control Origin in Header (CORS header ‘Access-Control-Allow-Origin’ missing). So the query is blocked and does not reach the Webservices server (IRIS Interoperability).

Hi All,
I am a product owner for a 3rd party healthcare product.
We have built FHIR integrations with Cerner and EPIC using their FHIR sandboxes and would like to do the same for Trakcare.
Essentially we can lookup a patient record on the FHIR sandbox and import their demographics into our product. Switch out the sandbox credentials for production and we can integrate directly into the customers data.
Does a similar service exist for Trakcare?
I am new to the InterSystems ecosystem and am struggling to fathom which service does what.

I have recently come across a problem saving TrakCare reports as PDF files while using the MS Edge browser on a Windows 10 PC. Whenever a user selected the Save to PDF option the window Tab would crash and reset. The event was trapped and viewable in the Windows Events Viewer and showed a Fault in the AcroPDFImpl64.dll. Even a little research on the Internet showed me that this has been an issue for many and for quite some time – not just in TrakCare, but many other non-InterSystems applications.

Hi Developers,

Enjoy watching the new video on InterSystems Developers YouTube:

⏯ Analytics with InterSystems New and Next 2022 @ Global Summit 2022

 Hello Community!

This article gives an overview of the REST JSON webservices developed for TrakCare.

These webservices allow users to access TrakCare data from outside of the software, mainly through external apps.

Is there any full featured tutorial available for doing the report development using object script in the Trakcare system for a starter developer(For Trakcare)?

Once we developed the report and then how we can test and add this report to our existing Trakcare.

Hi everyone, I met this Jenkins build problem when commit to P4.

ERROR #5001: GUID reference(s) missing from stream websys/TranslationType/questionnaire.QCNXXCVD.Edit/68D7225A-DE63-11EB-AF4C-005056B66BA0.xml; 35551C28-0C38-11EB-A1C8-005056B66BA0

So how can I solve this problem. Would anybody help me? Thanks.

Hi There, 

I am reaching out to the community to see if anyone has implemented SSO via SAML into TrakCare from Azure AD? 

Also looking to see if anyone has come across automated role provisioning, I have seen this from an IRIS perspective but not directly into TrakCare. 

Thanks in Advance

Cheers, 

TC

Is there a way to apply Transformation on any Dynamic column in Clinical Viewer.

As there is no transformation field available here. 

Happy #VSummit21 week!!

CCR users should check out the following Virtual Summit '21 session by @Jean Millette:

Drinking Our Own Champagne: InterSystems AppServices Move from Zen Reports to InterSystems Reports 

- Find out how we use the CCR application to make changes to the CCR application (for reports)

- Find out how we moved from Zen Reports to InterSystems Reports for the CCR application

Feel free to ask questions on the content.

Nice work Jean!!

Hundreds of users at TrakCare and HealthShare sites around the world rely on the InterSystems CCR Application (Change Control Record) to track their changes and deploy their configuration.  InterSystems is excited to announce that following the launch of the Angular-based Documentation and FAQs this summer, the CCR application is now ready to accept beta testers to try out further expansion of the Angular UIs.  

Users at CCR-controlled sites who wish to participate in the beta testing of the new UI can "opt-in" using the following steps:

1. Navigate to https://ccr.intersystems.com/ccr/detailsUser.csp

Our company is using Cache FDBMS for Medtrak.

I am trying to insert a record with the following data types : date, time, string and memo field (multiline).  The SQL insert/update works fine without the memo field.  

Here's my SQL statement

Insert into MR_SUB (MRSub_Date,MRSUB_Time,MRSUB_Update,MRSUB_Desc) values(:DTE, :time, :use, :remarks)

Based on FDBMS docs. MRSUB_Desc is a multiline/memo data type 

Hope somebody can help.  Thanks

At the top right corner in Clinical Viewer we have a wrench icon with which Administrator is able to change the layouts as and if needed. 

Are there any logs created when anyone modifies the layout and save the layout. 

Hi Experts

I am trying to pull the code tables Information and this code table has linked  code table not exactly obviously joined by SQL tables or columns. This is confusing me. Please can you clarify how to link these two tables. 

I will be generic to ensure, any privacy is protected

CT_Hospital has CT_Staff linked in.

When CT_Hospital has data, for that relevant hospital code, CT_Staff can be clicked and data entered. 

When I see in the Components - > Items I do not see any SQL table or SQL column common between CT_Hospital and CT_Staff. 

Question: How can I join CT_Hospital with CT_Staff.

Hello,

I am a clinician and we use Trakcare Lab LIMS at our institution.

We understand histopathology reports are directly typed, stored and uploaded directly to the LIMS.

For clinical audit purpose we need to download these reports directly in text format in bulk. Can anyone offer some technical assistance in retrieval of these histopathology reports? Is there any script that can be run to access, retrieve and download these reports?

Hi Experts,

SQL access,

In the component window, I see that some of the fields have no reference to SQL, for example: The active flag. 

how to know all the active elements, when getdate()>= DateTo or between time between From and To does not work in SQL, I see some existing code, with reference to CAST, please can you provide more details? Thanks a lot.

Dear Experts,

I have to pull out a report of certain code tables and this is my first script and I need to write many.

1. If I have to refer to the table, seeing the reference in the components with reference to SQL table and column, 

can I use Select < What I need from the table>

Inner join with reference table? 

I tried, I used the code table reference in the components, but I am getting errors, 

Inside Track Care Tools-> Code TableMap->Clinical and EMR->Observation Group->Selecting any Observation Group->Looking Observation Items inside it:-

I have a list of observation Items, I can add new to this list, but is there an option to remove any one from the list?

Hi, the hospital has deployed a set of TrakCare, but there is no document about TrakCare, including the implementation document of InterSystems installation of TrakCare and relevant management and maintenance documents. Could you please provide them?The hospital bought a complete set of products, should have relevant use documents.At the very least, there should be a relevant basic manual.

We are seeing more and more customers being lured with latest infrastructure technologies, particularly Composable Infrastructure. Coming with all sorts of data center consolidations and costs savings.

Question is: are there any concerns for HealthShare/TrakCare being run on these platforms or things to look out for? Anyone out there, already on these platforms?

To be more specific this is HPe Synergy with 480 Compute blades booting as bare metal.

Regards;

Anzelem.

Dear All CCR Users

Please note that All Perforce Systems will be unavailable from 6:00 p.m. EST on Friday, April 9th, 2021 to 3:00 p.m. EST on Sunday, April 11th, 2021.
During this time users will be impacted when trying to perform Perforce Activities when using the CCR Application.

CCR actions you can do while the InterSystems Perforce Server is unavailable:

• Create a new CCR and markPrepComplete
• Open the BASE Environment and Checkout changes
• Bundle and Upload (You will receive a message similar to the following: Attempting to upload ItemSet to CCR Server for ISCX17999.

I am very pleased to announce that tomorrow (Dec 3) at 9 AM Cambridge time we plan to enable the new CCR UI for all users.  No downtime should be required for the go-live.   Existing beta testers will not see any change, but for non-beta testers the new Frost-based Angular UI will replace the legacy CSP-based application for the home page, navigation, System Details, and several other parts of the application.

We have had over 100 people from a wide variety of organizations beta testing this new interface for many months now, and we confident that it will be well received.

I'm running Windows 10 x64 Pro 20H2 with Intersystems Cache ODBC driver v2018.01.00.184. I've setup a System DSN using the 64-bit of ODBC Administrator.

I've been getting inconsistent results using my regular application (Microsoft Power BI) which I use through ODBC to query my hosted TrakCare T2017 instance.

Using Microsoft ODBC Test Tool (part of MDAC 2.8 SDK) I can verify I get the same errors as in Power BI. They seem to be ODBC driver related but I can't pin it down.

ODBC Test Tool GUI shows: