New post

#ObjectScript

20

InterSystems ObjectScript is a scripting language to operate with data using any data model of InterSystems Data Platform (Objects, Relational, Key-Value, Document, Globals) and to develop business logic for serverside applications on InterSystems Data Platform.

Documentation.

Hi

Totally new to IRIS and Cache.

Trying to evaluate it and work out how we could use it.

As a standard application database. Object or relational etc. does not matter.

Issue is ObjectScript.

So:

1) Can we develop, maintain and use an IRIS database and never use ObjectScript i.e. use only Java, Python, C++ interfaces etc. (exactly which one does not matter)? Would that make designing and using the IRIS database more prone to inefficiency and error?

2 4
0 797

All,

I'm using Cache 2014.1 in an openVMS environment.

If I have multiple RMS files to clean up, for example.

!DIR MEMBER_EXTRACT.*;*

MEMBER_EXTRACT.CSV;2 MEMBER_EXTRACT.CSV;1
MEMBER_EXTRACT.PROC;1 MEMBER_EXTRACT.TXT;3
MEMBER_EXTRACT.TXT;2 MEMBER_EXTRACT.TXT;1

S FILE="MEMBER_EXTRACT.*;*"

Do ##class(%Library.File).ComplexDelete(FILE)

0 4
0 431

I am looking to run some analysis on existing software to quickly identify global variable references. Ideally you would feed in a "starting routine" and after going through all referenced routines you would end up with a finite set of global variables. So the primary purpose is to take say 10,000 lines of code and map out the referenced global structures without relying on a programmers eye. I found the post on Object Script equivalent to Studio "Find in Files" interesting but the downside is that output is too verbose and would require parsing to extract the global structures. How would you override writing to the terminal so that you could parse the data?

0 4
0 812
Question
· Jun 1, 2021
Storing a %DynamicObject

I've been tasked with an interface that needs to supply some additional metadata for the indexing of HL7v2 messages. After toying with a couple of ideas, I thought that it would be useful to subclass EnsLib.HL7.Message, add a %DynamicObject property, and store the metadata in it (it ends up getting sent to the target in JSON form anyway).

And, well, it seems to work just fine ... so far.

0 4
0 654

Hi all,

The last time I used CSP was back in 2008, so I am very rusty on it.
This question might have been asked many times, and the answer probably is that it is a matter of preference.

Are there scenarios to which CSP pages is easier/better to use than classes extending from %CSP.Page?
I want to build a little thing and don't want to start at the wrong end.
Doing an API-based, heavy client-side framework is not a requirement, and I would prefer not to do it that way.

Some of the criteria

1 4
0 252

Now the Classes/Rutines/DeepSee files will be automatically exported to the working directory after saving or compiling and files will be automatically deleted .

https://www.youtube.com/embed/B1pmqAQqd4M
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

Installation

To install isc-dev , you just need to download and import the file isc-dev.xml from last release.
Some ways to import isc-dev .xml file:

  • Go to Management Portal -> System Explorer -> Classes -> Import and select the XML file.
  • Drag the file over Studio.
  • Terminal command:
NS>do $system.OBJ.Load("yourpath/isc-dev.xml","ck")

NS>zpm
zpm: NS>install isc-dev

How to enable this feature:

  • After importing the class in the target namespace, run the following method to set up the working directory:
NS>do ##class(dev.code).workdir("/path/to/your/working/directory/src/")
  • Go to Management Portal -> System Administration -> Configuration -> Additional Settings -> Source Control.
  • Select the target namespace and set the dev.FileManExtension class as the main one and save it.
  • Try to create a new class in the studio and save/compile it
  • Enjoy!
Open Exchange app
4 4
2 440

Hi folks!

We have a bunch of templates on OEX that provide a handy foundation for building a particular application with IRIS. And the basic principle of each and every template is that we take vanilla IRIS images, load code, and files into the image using Dockerfile, and create a new docker image as a solution. And then we develop running this image and rebuilding it when returning to development.

Some developers ask me why we need to build the docker image to work with the code. Indeed, if at the end of the day I need to develop a ZPM package and not a docker image why don't run the vanilla image and load the code and everything in it?

The problem I have with the building image approach is that often I can wait a lot to build an image and it fails on some Objectscript problem in the source that I cannot fix as the image is not building. and

Any thoughts? How do you develop with docker?

1 4
1 324

Recently, we scheduled two tasks (1008 and 1009) within Task Manager. Task ID 1008 is set to run after Purge Tasks (%SYS-ID:3), and Task 1009 is set to run at 7:00:00 each day.

In attempt to provide as much detail as possible, each of the tasks are as follows:

  • Task 1008

    WHILE (($p($h,",",2) < $ZTH("10:00 PM")) && ($P($g(^Task.1008(+$h,$j)),"^",1) = +$h)) { J ^ROUTINE, ^ROUTINE2 D SUB^ROUTINE3 H 5 }

0 4
0 740

Hi guys!

Was coding today with InterSystems IRIS in a docker container and decided to share with you the commands you may find useful in everyday coding.

# docker-compose build

command to build a container. Remember, it is useful if you have dockerfile in the repo.

if the build is successful call the following to launch it:

# docker-compose up -d

Find IRIS management portal on:

localhost:port/csp/sys/%25CSP.Portal.Home.zen?$NAMESPACE=%25SYS

where the port is what you set in docker-compose.yml - 52775 in this case.

Run the following if you want to launch a terminal session inside IRIS container:

# docker-compose iris iris session iris

gfhj gj 


sdfdsfsdf





USER>

And run the following to shut down the container:

# docker-compose down

Troubleshooting

5 4
4 600

Hi All,

I have a class method, this can be any cache expression to execute (usually a class / method and args) and and args stored in a variable, for example;

set aa = "##Class(Utils.Test).Run(1,2,3)"

do aa

I tried using $classmethod(class,method,args..), by extracting the values but sometimes there can be no arguments, or arguments such as ;

("2019-01-01","1,2,3,4")

which causes issues while running the $classmethod, (i am using $P to extract the Class, Method and args).

Is there any simpler way of doing this?

0 4
0 288

I have a custom written date, setup as myDate in my application, which always behaved fine for years, and now it's acting a little weird.

When I run SQL in Display mode the date shows as 1/10/1841 for some but not ALL rows.

When I run the same exact query in logical Mode the date shows normal format, in my case, for example 10/1/2019. When the application is running is shows the incorrect date. When I run the terminal session and open a ref point and ask to write a date is shows 10/1/2019, but I am expecting internal format here - 65287.

0 4
0 279
Question
· Apr 25, 2022
Run multiple Update sql queries

Hi everyone, how do you run multiple quires?

I have tried couple of different ways, but not working.

SET sql = 2

Set sql(1) = "UPDATE QUERY"

Set sql(2) = "UPDATE QUERY"

Set sqlStatement=##class(%SQL.Statement).%New()

Set sc1=sqlStatement.%Prepare(.sql)

If $$$ISOK(sc1) {

Set tResult = sqlStatement.%Execute()

}

else{

$$$LOGERROR("Failed")

}

0 4
0 1.1K

Hi all,

I might be losing my mind or do not understand how ObjectScript does string comparisons, but the following does not look right to me.

Is it really possible that you can't compare non-numerical strings other than with an equals or not equals?

USER>w ("45" < "46")
1
USER>w ("45" > "46")
0
USER>w ("V45" < "V46")
0
USER>w ("V45" > "V46")
0
USER>w ("V45" <= "V46")
1
USER>w ("V45" >= "V46")
1

In Python:

0 4
0 236

I'm trying to write an ObjectScript function that sorts version numbers to help learn ObjectScript. This is all I can think of after staring at VS Code for a while, but I don't know where to go with it. Can someone please help out with a tip? The goal is to take something like ["1.4.5", "0.5.3", "6.3.2", "1.2.4"] and turn it into ["0.5.3", "1.2.4", "1.4.5", "6.3.2"]

0 4
0 222

Your may not realize it, but your InterSystems Login Account can be used to access a very wide array of InterSystems services to help you learn and use InterSystems IRIS and other InterSystems technologies more effectively. Continue reading to learn more about how to unlock new technical knowledge and tools using your InterSystems Login account. Also - after reading, please participate in the Poll at the bottom, so we can see how this article was useful to you!

5 4
1 341

In the previous article, I have demonstrated a simple way to record data changes. At this time I have changed the "Audit Abstract Class" which is responsible for recording audit data and the data structure where the audit log will be recorded.

I have changed the data structure to a parent and child structure where there will be two tables to record the "transaction" and the "fields its values" changed on that transaction.

Take a look at the new data model:

6 4
1 939

I am new to Intersystems Cache, so please bear with me. We are using HealthShare 2013.1.

I have a routine to compare databases from separate instances where I want to ignore values that begin with %sqlcq. I thought this would be easy with pattern matching operator '?' but it is proving difficult and it seems to be because of the percent character.

For example:

0 4
0 422