#InterSystems Demo Games entry

⏯️ Healthcare AI Agent Platform

An AI Agent Platform specifically built for the healthcare industry that requires no technical background to utilize. By simply defining a goal or initiative, a swarm of AI agents will conduct operations to achieve the stated end goal and measure their own efficacy along the way to continuously improve. Healthcare organizations today are facing a myriad of challenges that impact financial and clinical performance. These problems are well known, and there is a general consensus on how many of them can be alleviated with AI. However, healthcare organizations face unique challenges in implementing AI:

• HIPAA/Regulatory compliance - Data quality & accessibility - Embedding AI into current clinical workflows, i.e. integrating AI in such a way that it does not require clinicians to re-orient their processes. It should complement existing workflows, not disrupt them.
• Implementation cost/high technical barrier of entry – staff needed to build and maintain AI processes can become expensive
• Ambiguous ROI calculation – careful considerations must be made to properly measure and understand the efficacy of AI integrations. InterSystems is uniquely positioned to address these challenges, enabling healthcare organizations to implement AI with minimal burden.

Presenters:
🗣 @Daniel Cole, Sales Engineer, InterSystems
🗣 @Jeff Morgan, Sales Engineer, InterSystems
🗣 @Raef Youssef, Sales Engineer, InterSystems
🗣 @Jose Ruperez, Senior Sales Engineer, InterSystems
🗣 @Harry Tong, Principal Solutions Architect, InterSystems
🗣 @Nicholai Mitchko, Sales Engineering Manager, InterSystems

InterSystems FAQ rubric

You can check the free disk space at any time using the system utility class: SYS.Database and query: FreeSpace.

Here's how to try it in the IRIS terminal (go to the %SYS namespace and then run it):

zn"%SYS"set stmt=##class(%SQL.Statement).%New()
set st=stmt.%PrepareClassQuery("SYS.Database","FreeSpace")
set rset=stmt.%Execute()
do rset.%Display()

The output result example is as follows:

*In the command execution example, all databases are located on the same disk, so the free disk space (DiskFreeSpace) returns the same value.

Dumping result #1
DatabaseName

I feel I may be in the "people unclear on the concept" group here.

System Default Settings is a great mechanism, and we use some custom code to deploy it in our pipeline after environment specific changes have been applied to the content. However, we are trying our best to reduce the amount of custom code we use in our system that does not relate directly to the business. For CI/CD, this means we are trying to leverage IPM for the heavy lifting.

Is there a method for handling System Default Settings in IPM that I am just overlooking?

We are looking for experienced InterSystems IRIS for Health developers to join a long-term healthcare technology project. You must be USA-based and available to work full-time remotely.

🔹 Requirements:

• Strong experience with InterSystems IRIS for Health
• Solid understanding of HL7, FHIR, and healthcare integration workflows
• Proficiency in ObjectScript, and Python/Java/SQL
• Prior experience with EHR, LIS, or other clinical systems is a big plus
• Must be based in the United States

Interested candidates can DM here or email on: ali.ceo@softhawker.com
 

Are you curious about how to run Python scripts directly in your InterSystems IRIS or Caché terminal? 🤔 Good news it's easy! 😆 IRIS supports Embedded Python, allowing you to use Python interactively within its terminal environment. 

How to access the Python Shell?

To launch the Python shell from the IRIS terminal, simply run the following command:

do##class(%SYS.Python).Shell()

This opens an interactive Python shell inside the IRIS terminal. From here, you can write and run Python code just as you would in a normal Python environment.

Exiting the Shell:

>>> quit()

This will exit the Python shell

Hello Community
I was running code in the terminal and attempted to interrupt its execution. During that process, I encountered an application error with a log entry dated 01/06/1841, the date seems unusual.

Error <INTERRUPT>ErrST+6^%ETN occurred within %ETN itself. Detailed information cannot be logged.

Good morning everyone,
In the facility we're working in, we have two separate installations for testing and production.In the test environment, we have production processes running properly, and we need to replicate production processes and settings in the production environment.Until now, when we move from a test environment to a production environment, we currently export the test classes, import them into production, and manually configure the production environment by connecting Services, Processes, and Operations and configuring the settings.

The 2025.1.1 maintenance releases of InterSystems IRIS^® data platform, InterSystems IRIS^® for Health^TM, and HealthShare^® Health Connect are now Generally Available (GA). Please share your feedback through the Developer Community so we can build a better product together.

Documentation

You can find the detailed change lists & upgrade checklists on these pages:

• InterSystems IRIS
• InterSystems IRIS for Health
• HealthShare Health Connect

Early Access Programs (EAPs)

There are many EAPs available now. Check out this page and register to those you are interested.

How to get the software?

Full

Hey Developers,

Watch this video from our Tech Video Challenge to discover how to connect a FHIR Server and transform a batch file into SDA and then to FHIR JSON:

⏯ Mapping a Custom File to SDA

InterSystems is pleased to announce the General Availability (GA) of the 2025.2 release of InterSystems IRIS® data platform. This is a Continuous Delivery (CD) release. Please note that the GA versions of InterSystems IRIS for Health™ and HealthShare® Health Connect™ 2025.2 are currently withheld due to mirroring limitations introduced by security updates (details below).

Release Highlights

This release introduces impactful enhancements across security, developer experience, operations, and interoperability. Notable new features include:

1.       Security Enhancements with the New IRISSECURITY

Optimizing Performance of Apache Web Server and Web Gateway

By Patrick Jamieson, M.D., Product Technical Manager, InterSystems IRIS for Health

When working with InterSystems IRIS or IRIS for Health, an external web server like Apache2 or NGINX is essential for managing HTTP workloads, especially for FHIR servers. Starting with version 2023.3, the private Apache server was removed from the installation kit (except for Community Editions and Health Connect). This article provides practical tips to test and optimize the performance of your Apache web server and InterSystems Web Gateway

Hi,

To add or get information about a user for the management portal you can [within the portal]:
 System Administration > Security Management > Users 

Is it possible to:

1. List a user, user's properties including roles

2. Add a user and set user's properties including roles

3. Set a user's password

for the management portal using a program eg. Objectscript and/or SQL?
If so, how can this be done?
It would be great if you have examples.

Dear InterSystems-Maintainer Team,

I am currently conducting a comparative evaluation of FHIR clients as part of my
bachelor thesis in health informatics. One of my evaluation criteria is the response
time to support inquiries.

Therefore, I would like to kindly ask the following question as part of my analysis:
How can I read and write custom FHIR extensions using your client library?

If available, could you point me to any documentation or examples?

Many thanks for your time and support!

Kind regards,
Rüya Gökoglu

I need to implement a retry policy for an incoming message queue containing thousands of relatively small messages.

Successfully processed messages should be immediately removed from the queue.

If an error occurs while processing a message, the message should be sent back at the end of the queue, and the pause before re-processing this message should increase geometrically (1-2-4-8-16 seconds, and so on).In languages that support the async/await pattern, I'd simply create a delayed timer that triggers a fire-and-forget task.This would prevent blocking the main thread.

Hi,

I have a mirrored database called ROUTER.

I have a primary server T1 and a "Disaster Recovery" server T2.

When I activate ROUTER database on T2, I get the error it says the "Database could not be mounted".

I went to the audit database and it shows "Attempt to access a protected database".

T2 in mirror monintor shows "Connected" "Caught up" "Warning! Some databases need attention"

T2 show the ROUTER database as being "Mounted/R"
Both T1 & T2 are Linux servers. The ROUTER database file IRIS.DAT have the same Linux permissions

All productions on T1/T2 are not running.

What causes the error "Attempt

Hey Community,

Watch this video to learn about AI Co-Pilot, which simplifies DTL coding and offers personalized assistance which makes it accessible to users with varying levels of technical expertise:

⏯ Accelerate DTL Coding with AI Cloud Service @ Global Summit 2024

🛠️ Managing InterSystems InterSystems API Manager (IAM = Kong Gateway) configurations in CI/CD

🔍 Context: InterSystems IAM configurations 

As part of integrating InterSystems IRIS into a secure and controlled environment, InterSystems IAM relies on Kong Gateway to manage exposed APIs.
Kong acts as a modern API Gateway, capable of handling authentication, security, traffic management, plugins, and more.

However, maintaining consistent Kong configurations (routes, services, plugins, etc.) across different environments (development, testing, production) is a major challenge. This is where tools like

Hello Community!

We have this json payload for an api request we are making.
 

{

    "fromDirectAddress" : "john@meda.com",

    "toDirectAddress" : "smith@domain.com",

    "emailAttachmentList" : [

        {

            "attachmentClass" : "application/xml",

            "attachmentContent" : "PHRlc3Q+TWVkQWxsaWVzPC90ZXN0Pg==",

            "attachmentTitle" : "MR-Lumbar Spine without contrast_1",

            "attachmentFileName" : "ClinicalDocument"

        },

"messageId" : "urn:uuid:a2d59543-91f4-45a4-99ef-72d70da1e454"

}

I created two classes (see below) but I am having issues with setting the emailAttachm

Hello everyone,

I'm using EnsLib.TCP.TextLineOutboundAdapter to communicate with a third-party system over TCP/IP. The issue is that the system sends back only an integer (e.g. 1001 or -1) without any terminator (like $c(10)).

The adapter expects a terminator and always times out with ErrTCPTerminatedReadTimeoutExpired, even though the correct data is received. Here an example of an error: 
[TCPSender] Errore nell'invio: ERROR <Ens>ErrTCPTerminatedReadTimeoutExpired: TCP Read timeout (15) expired waiting for terminator 0, data received ='1005'

Trying different terminators (e.g.  $c(0), $c(13))did

Hello Community

The InterSystems IRIS Community License for Iris version 2024.1 is about to expire. I would like to know if there’s a way to extend this license, or if I need to upgrade to the latest version of Iris.

Thanks!

Hello Again,

InterSystems Certification is still looking for people to beta test the InterSystems IRIS SQL Professional Certification exam. This is a great way to earn the certification for free! We have extended the deadline of the beta test to October 30, 2025.

Please note, only candidates with the pre-existing InterSystems IRIS SQL Specialist certification are eligible to take the beta.  For details, see the original announcement.

Thank you!

As foreign tables are behind a paywall (booo); we have a external cache system using the intersystems ODBC driver or usually a .jar CacheDB.jar. 

The requirement is :

"Create a copy of the external table once a day to perform comparisons to detect changes"

We could go full code and this is what we will do but trying the following should ideally work 

CREATETABLE Sample.YoungPeopletwo ASSELECT *
FROM Pennine_TIE_Clinicom_Link.PMISPECIALREGNCA
WITH STORAGETYPE = COLUMNAR

This resulted in 

[SQLCODE: <-400>:<Fatal error occurred>]
[%msg: <Exception caught during dSQL statement %Execute:

Hello,

I need to expose InterSystems HealthInsight dashboards over the internet to external operators. The authentication flow is managed externally. When a user is authenticated, our system receives an HTTP request with specific headers (e.g., operator’s fiscal code and hospital identifier) that we need to extract in order to:

• Authorize the user to access the dashboards.
• Apply row-level security on the dashboards, filtering the data by hospital and user role.

I created a new Web Application on IRIS as shown in the screenshot:

I follow this page of the documentation for the settings: https://

So I would like to start a production with a service that has an SQL trigger for after and INSERT. Then I would like it to start a process. Could someone help me in the direction of a solution, please and thanks.

Hi,

We have just upgraded the Trusts test Health Connect instance from 2021.1 to 2025.1 and now the the Rules and DTL editors, in the Management Portal, timeout after 10 - 20 minutes of inactivity.
In 2021.1 we were able to disable this timeout using: set ^EnsPortal("DisableInactivityTimeout","Portal") = 1, however this no longer works with 2025.1, and is being ignored.
It may be being ignoring this global setting because the editors are no longer using the default Web Application for the Namespaces, and are using the: /ui/interop/rule-editor and /ui/interop/dtl-editor Web Applications.
The

Join us on Thursday to see the new features of Deltanji source control, version 8.1.

We'll be demoing our new Git Location Driver along with other functionality and usability improvements.

The Git Location Driver enables Deltanji to integrate directly with Git repositories, makes Deltanji the perfect source control companion to those who use Git-based repos by providing tighter integration with InterSystems IRIS.

Date: Thursday, July 17th 
Time: 11 - 12pm EDT | 4 - 5pm BST | 5 - 6pm CET
Location: Online (register for details) 

Can't make it? Email info@georgejames.com and we'll send you the

I am making a FHIR request against Epic, in when I get the Response back using "fromDao" I am extracting the stream into HS.FHIRModel.R4.Patient. However, the patient's name comes back as name within a list that references HS.FHIRModel.R4.SeqOfHumanName.

• How do I extract the name from HS.FHIRModel.R4.SeqOfHumanName?
• Do I have to then do another "fromDao" to pull the list into string format?
• How do I navigate around the lists that are in a FHIRModel response, to extract the string values?

#InterSystems Demo Games entry

⏯️ Care Compass – InterSystems IRIS powered RAG AI assistant for Care Managers

Care Compass is a prototype AI assistant that helps caseworkers prioritize clients by analyzing clinical and social data. Using Retrieval Augmented Generation (RAG) and large language models, it generates narrative risk summaries, calculates dynamic risk scores, and recommends next steps. The goal is to reduce preventable ER visits and support early, informed interventions.

Presenters:
🗣 @Brad Nissenbaum, Sales Engineer, InterSystems
🗣 @Andrew Wardly, Sales Engineer, InterSystems
🗣 @Fan Ji, Solution Developer, InterSystems
🗣 @Lynn Wu, Sales Engineer, InterSystems

☤ Care 🩺 Compass 🧭 - Proof-of-Concept - Demo Games Contest Entry

Introducing Care Compass: AI-Powered Case Prioritization for Human Services

In today’s healthcare and social services landscape, caseworkers face overwhelming challenges. High caseloads, fragmented systems, and disconnected data often lead to missed opportunities to intervene early and effectively. This results in worker burnout and preventable emergency room visits, which are both costly and avoidable.

Care Compass was created to change that.

Disclaimer: Care Compass project is a technical demonstration developed by sales engineers