New post

#HealthShare

24

InterSystems HealthShare is a healthcare informatics platform for hospitals, integrated delivery networks (IDNs) and regional and national health information exchanges (HIE). HealthShare includes health information exchange, data aggregation, workflow, text analysis, and analytics technology.

Learn more

I have a pResponse output in my onrequest method, in here I build an ACK and set the pResponse variable to it, and return a status object afterwards.

The pResponse doesn't show up in the trace or message viewer, yet if I move the interface to another more established namespace it works fine, what settings or config could be preventing the ACKS going back?

0 4
0 217

what happened is, I selected a user to investigate their entries. I didn't enter a start date.

After hitting search, the query timed out, (or i cancelled it, I don't recall).

Now, when I go to that page, the browser processes and nothing is displayed.

I cleared my browser's cache, and I still get a blank page.

I'm running on Win10.

I use Chrome as my default browser. The problem also happens in Fire Fox.

i can log in as a different user and the page displays as expected.

How can I correct this situation?

Thanks!

0 4
0 291

Good morning,

I was wondering:

Given the following scenario where we have a string where each two items are being splitted by "|" as follows: "squadName|initialLetter"

"Alfa|A|Bravo|B|Charlie|C|Delta|D|Echo|E|Foxtrot|F|Golf|G|Hotel|H|India|I|Juliett|J|Kilo|K|Lima|L|Mike|M|November|N|Oscar|O|Papa|P|Quebec|Q|Romeo|R|Sierra|S|Tango|T|Uniform|U|Victor|V|Whiskey|W|X-ray|X|Yankee|Y|Zulu|Z"

And we would need to generate a String structure like:

0 4
0 348

Any suggestions on a way to indicate when a patient encounter is in an ‘Observation’ status** in Clinical Viewer? Clients would like to be able to distinguish between true ‘Inpatient’ or ‘Emergency’ status and ‘Observation,’ especially given that encounters often cycle between various statuses.

0 1
2 252

In over a decade of using Ensemble/HealthShare, we have been able to use a single message type (doc type) for all HL7 ADT event types. We now have an application for which the HL7 segment sequence is different for A03s than it is for other ADT event types. The content of the segments is the same across event types; only the segment sequence differs. The data transformation has to do some custom logic, so we can't just use the "copy" variety of the transformation Create property.

0 3
0 392

Good morning:


Thank you very much for reading the doubt and above all thank you very much for answering.

Given the following use case:

If we have a Destination Service that through a HTTP GET by REST gives us a certain JSON response, where it should be noted that it is a list of objects where each object in the list does NOT have a key:

0 3
0 339

Please help,

I'm using a SearchAndFetchRequest to retrieve a full SDA3 Container from the ACCESS gateway. The response is presented in the pResponse.SearchAndFetchGeneralResult.XMLData property. This property is of type string. I want to put the data from this property in a HS.SDA3.Container and then use this container is a dtl for translation purposes. My current data in the XMLData property is too large to fit in a string. Therefore I'm searching for a way to convert te data to a stream and that import the stream into my Container...

0 2
1 384

Hello everyone,

I am looking for a sort of REST interoperability adapter that can forward REST calls within HealthConnect. If necessary, we need to adjust the requests or responses.

For Fhir calls, we use the FHIR Interoperability Adapter. This works perfectly; a message comes in as HS.FHIRServer.Interop.Request, and a message HS.FHIRServer.Interop.Response goes out. I can make adjustments as needed to both the request and response. I am looking for the same functionality, but then for non-FHIR REST calls.

0 2
0 207
Question
· Apr 5, 2023
Document SDA deletion

Hi Guys,

I have XDSb documents stored in repository and its url stored in Document streamlet in Edge.

Now when document gets deleted from Xdsb repository using XDSb_ removeDocument that goes to repository services.

How can I delete document streamlet of that document.

Any Ideas?

0 2
0 335

Hey all,

I have been creating a class to handle file encryption by using GPG keys. I pushed my code out today and my encrypt and decrypt methods weren't working. About a half an hour later in troubleshooting I found out that it needed to be a syntax change. My method has three parameters to it. Examples below:

This is how I was calling it in the test system with no issues:

do gpg.Encrypt()

This is how I was having to call it in my production system to work with no issues:

do gpg.Encrypt("","","")

0 6
0 305

Hi Community,

There are two records of the same patient coming from the same source and when they are merged from the source they are not updating Health Information Exchange. I have blurred crucial information and the records are not falling off the worklist items after a merge from the source system.

The two records from the same source are in the middle section and the right section.

0 1
0 315

Hi,

we get HL7 MDM messages with embedded PDF documents that are Base64 encoded. When the embedded PDF document exceeds the size of 3.6 MB the following error occurs:

FEHLER <Ens>ErrBPTerminated: BP Main HL7 MDM # wird wegen folgenden Fehlers beendet: FEHLER #5002: Caché-Fehler: <MAXSTRING>zgetAtFromArray+46^EnsLib.HL7.Segment.1
> FEHLER #5002: Caché-Fehler: <MAXSTRING>zgetAtFromArray+46^EnsLib.HL7.Segment.1

0 3
0 355

Hey all,

I'm trying to enable an existing namespace to be Ensemble enabled by doing the command do ##class(%EnsembleMgr).EnableNamespac($namespace,1), but I'm still getting the error message. Is there something that I'm missing?

I've attempted to reboot the server and even went incognito to see if it was a caching issue, but I'm still not able to create an Ensemble production in that namespace.

0 2
0 469

I'm wondering how I would go about adding headers to a csv file which has already been created. I am unfamiliar with ObjectScript.

For example if I were to use R, I would simply write..

test <- read.csv("file/path/example/Extract.csv", header=FALSE)
colnames(test) <- c("A","B","C","D","E")

I do not have embedded Python installed either as I would know how to do it in that also.

How could I mirror this in ObjectScript please?

My current create file method:

0 3
0 311

In article

https://community.intersystems.com/print/518106

Traceback (most recent call last):
File "c:\Users\rochesterd\PythonScripts\fhir_stuff\fhir-client-python-main\fhir-client-python-main\src\client.py", line 57, in <module>
patient0 = Patient.parse_obj(patients_resources.search(
AttributeError: 'NoneType' object has no attribute 'serialize'

0 8
0 294

Newbie here...

I am looking to use fhir to gather patients in our end point that have a certain diagnosis and or certain insurance.

Is this what fhir can be used for?

In the past I have done the normal SQL query/extract to CSV file. Looking to use fhir for this for future.

Thanks in advance for your time

Dean-O

0 1
1 457

Can someone confirm that HealthShare Health Connect 2022.2 is the correct latest release that is available via the Online Distribution? I tried looking at the HealthShare Health Connect on WRC and now do not see a 2022.2 or 2022.3 version. Is this correct? So I shouldn't be running 2022.2? Did Health Connect get renamed? A couple of months ago I downloaded HealthConnect-2022.2.0.368.0-lnxrh8x64 but not seeing it now on the WRC site.

0 2
0 318

Hi Team ,

Can I please check if anyone has encountered SOAP authentication error when trying to submit a certificate signing request or when trying to get certificate .

I configured a local CA server without SMTP configuration and I configured a local CA client. These steps worked okay.

Then I tried to Submit Certificate Signing Request to Certificate Authority server and I am getting the following error :

0 1
0 332

Hello community,

is there anything special to consider when running a foundation production regarding purge jobs (Ens.Util.Tasks.Purge)? I am thinking specifically of the QuickStreams, which according to my information are stored in a temporary database until the system is restarted. Since a system reboot is much less frequent then the purges, I wonder what happens to the QuickStreams whose messages and headers have already been purged. Is there a way to view Quickstreams (not content, but rather metadata) e.g. via the Management Portal?

Thanks for your comments and hints,

0 3
0 245