#HealthShare

Hi-  I have a HL7 message ADT_A01 (Admit) that contains several Z segments, which don't necessarily all appear at the end of the document, like normal.  See below...

  1    MSH ^ ~|\& ^ VAFC PIMS ^ 500 ^ HEALTHSHARE ^ 500 ^ 20171103154747-0500 ^  · ^ ADT ~ A01 ^ 50019000 ^ T ^ 2.3 ^  · ^  · ^  · ^ NE ^ USA 
 
  2    EVN ^ A01 ^ 20171103154701-0500 ^  · ^ 05 
 
  3    PID ^ 1 ^ 5000000351V802052 ^ 100853 ~ 1 ~ M10 ^ 3333 ^ POINDEXTER ~ KENNETH ^ "" ^ 19690117 ^ M ^  · ^ "" ~  · ~ 0005 ~ "" ~  · ~ CDC ^ "" ~ "" ~ "" ~ "" ~ "" ~  · ~ P ~ "" ~ "" | "" ~ "" ~ "" ~ "" ~ "" ~  · ~ VACAE ~ "" ~ ""

Is there a way to Remove specific all Addresses from a Provider.Individual.Address before reinserting the Addresses from an HL7 message in Provider Directory?

Most fields we can call %clearFields() however since Addresses come from multiple locations we need to isolate and treat Addresses from this HL7 source as a snapshot.

Thanks

Scott

Hi all,

I’m running into an issue with a %ZEN.Component.tablePane in a Zen page.

We have:

• A fully styled table with all columns defined
• A backend query (SearchMessages) that accepts multiple filter parameters
• A set of input fields at the top of the page for filtering (text, date, and checkboxes)

We’re trying to run the query from a button click using a client-side method (runSearch()) that collects the filter values, sets them as parameters, and calls executeQuery().

The problem is that the table does not update at all. Old rows remain, or sometimes nothing appears.

I have the unfortunate job of installing IRIS and Healthshare (real Healthshare not Healthconnect) on 16 difference instances (tst, stg, prd with mirrors etc). the Dev was set up manually (mostly by me).

So I decided to create a class that installed the db's, namespaces, mappings and HSREGISTRY options , i then decided an installer manifest was a better idea, I keep changing my mind on which!.  I understanding manifest is "typically" for dockers to create the environment but have seen ISC use them for creating new setups aswell (outside docker)

As such I'm looking for opinions on which is the

This article is a continuation of the IRIS JSON project and features additional methods and insights.

Let's continue with the instance methods

%GetTypeOf(Key)

This instance method is used to determine the JSON data type of the %DynamicObject or %DynamicArray.

It returns one of the following strings:

USER>Set array = [1,"test",true,12.3256

Been testing out the Production Validator toolkit, just to see what we can/not do with it. Seems really interesting and there seem to be some use cases for it that can really streamline some upgrades (or at least parts of upgrades) but I was running into so many hurdles with the documentation. I am curious if anyone else has used it.
Did you experience any issues getting it working? Any clarification that you would have liked in the documentation? any use cases that you worked through that made it particularly valuable? etc?
The hurdles I experienced included:

1. The documentation stated that the

Hello Community,

I'm currently planning a system upgrade from Caché (2018.1.8.766) to InterSystems IRIS (2024.1). The environment consists of one database server and three application servers connected via ECP.

I’m considering two possible upgrade approaches:

1. Upgrade the application servers to IRIS first.
   Since IRIS is expected to be backward-compatible with Caché over ECP, the database server would remain on Caché temporarily.
2. Upgrade the database server first,
   followed by upgrading the application servers, as they don’t store data.

Could you please advise on the recommended approach,

Hi Everyone,
Please suggest/share best practices and sample questions that would help me to secure InterSystems HL7 specialist Certification.

If you want to find out what exact version your Docker image is (and since the latest image tagging scheme you cannot just rely on the image tag; and assuming you don't want to actually run it just in order to find out) you can run this docker command:

Hi Community,

Enjoy the new video on InterSystems Developers YouTube:

⏯ HealthShares Nav App as a Service Orchestrator with Single SignOn for 3rd Party Apps @ Global Summit 2024

Greetings dear community members!

Many of you will remember the NLP capabilities available in IRIS under the name iKnow, which were deprecated not long ago. But...is everything deprecated? NO! A small village resists deprecation: iFind indexes!

Hello, how are you?

First of all thanks for your time reading this question.

We are investigating how to validate the indexes of a global. We have read:

https://docs.intersystems.com/irisforhealth20251/csp/docbook/DocBook.UI…

And:

https://docs.intersystems.com/irisforhealth20251/csp/documatic/%25CSP.D…

We want to validate the inxedes of the global titled "Ens.Util.LogD". We have executed on the ObjectScript terminal, on the desired namespace:

ESBSSCC>set tSC =

• HealthShare Unified Care Record Overview – Virtual August 26-27, 2025
  
  • The HealthShare Unified Care Record Overview course is a great way for anyone to become familiar with Unified Care Record, but especially those who need to understand its capabilities but not how to configure HealthShare Unified Care Record.
  • This is a non-technical, instructor-led in person training course providing a comprehensive introduction to HealthShare Unified Care Record.
  • This course is for anyone who needs to know about the functionality and architecture of HealthShare Unified Care Record.  (If you need

InterSystems FAQ rubric

You can check the free disk space at any time using the system utility class: SYS.Database and query: FreeSpace.

Here's how to try it in the IRIS terminal (go to the %SYS namespace and then run it):

zn"%SYS"set stmt=##class(%SQL.Statement).%New()
set st=stmt.%PrepareClassQuery("SYS.Database","FreeSpace")
set rset=stmt.%Execute()
do rset.%Display()

The output result example is as follows:

*In the command execution example, all databases are located on the same disk, so the free disk space (DiskFreeSpace) returns the same value.

Dumping result #1
DatabaseName

We are looking for experienced InterSystems IRIS for Health developers to join a long-term healthcare technology project. You must be USA-based and available to work full-time remotely.

🔹 Requirements:

• Strong experience with InterSystems IRIS for Health
• Solid understanding of HL7, FHIR, and healthcare integration workflows
• Proficiency in ObjectScript, and Python/Java/SQL
• Prior experience with EHR, LIS, or other clinical systems is a big plus
• Must be based in the United States

Interested candidates can DM here or email on: ali.ceo@softhawker.com
 

Are you curious about how to run Python scripts directly in your InterSystems IRIS or Caché terminal? 🤔 Good news it's easy! 😆 IRIS supports Embedded Python, allowing you to use Python interactively within its terminal environment. 

How to access the Python Shell?

To launch the Python shell from the IRIS terminal, simply run the following command:

do##class(%SYS.Python).Shell()

This opens an interactive Python shell inside the IRIS terminal. From here, you can write and run Python code just as you would in a normal Python environment.

Exiting the Shell:

>>> quit()

This will exit the Python shell

Good morning everyone,
In the facility we're working in, we have two separate installations for testing and production.In the test environment, we have production processes running properly, and we need to replicate production processes and settings in the production environment.Until now, when we move from a test environment to a production environment, we currently export the test classes, import them into production, and manually configure the production environment by connecting Services, Processes, and Operations and configuring the settings.

HyperEvent Error Details

HTTP Code: 500

Error: Error invoking instance method: SetSearchCriteria:

<INVALID OREF>zInitSearchCriteria+15^EnsPortal.Template.filteredViewer.1

Set %ret = %obj.SetSearchCriteria()

%obj='6@EnsPortal.MessageViewer'

==========

STACK:

zInitSearchCriteria+15^EnsPortal.Template.filteredViewer.1 (1):

zSetSearchCriteria+1^EnsPortal.Template.filteredViewer.1 (1):

zSetSearchCriteria+2^EnsPortal.MessageViewer.1 (1):

@ (1):

zInvokeInstanceMethod+133^%ZEN.Controller.1 (1):

zInvokeInstanceMethod+2^%ZEN.Component.abstractPage.1 (1):

@ (1):

zCSPEvent+10^%CSP.Broker.1 (1):

zOnPage+3^%CSP.Broker.1

Hi,

We have just upgraded the Trusts test Health Connect instance from 2021.1 to 2025.1 and now the the Rules and DTL editors, in the Management Portal, timeout after 10 - 20 minutes of inactivity.
In 2021.1 we were able to disable this timeout using: set ^EnsPortal("DisableInactivityTimeout","Portal") = 1, however this no longer works with 2025.1, and is being ignored.
It may be being ignoring this global setting because the editors are no longer using the default Web Application for the Namespaces, and are using the: /ui/interop/rule-editor and /ui/interop/dtl-editor Web Applications.
The

Hello InterSystems Community,

I'm working with HealthShare, and need to create a user account for our development environment with specific access requirements. This user will need only to:

    Review messaging and environments
    See production and namespaces
    NOT modify anything (read-only access)

After reviewing the documentation on user roles and rights management, I can see the default roles available in our system include:

Ensemble/Interoperability Roles:

    %EnsRole_Administrator - Interoperability Administrator
    %EnsRole_AlertAdministrator - Interoperability user with administrative

Join us on Thursday to see the new features of Deltanji source control, version 8.1.

We'll be demoing our new Git Location Driver along with other functionality and usability improvements.

The Git Location Driver enables Deltanji to integrate directly with Git repositories, makes Deltanji the perfect source control companion to those who use Git-based repos by providing tighter integration with InterSystems IRIS.

Date: Thursday, July 17th 
Time: 11 - 12pm EDT | 4 - 5pm BST | 5 - 6pm CET
Location: Online (register for details) 

Can't make it? Email info@georgejames.com and we'll send you the

Good morning,

We need your help:

We wonder if there is a way to filter EnsLib.DICOM.Document, by using its DataSet properties on the Message Viewer.

For example, we would like to find the following DICOM.Document which DataSet.AccessionNumber is SR115985013100

By using the Message Viewer Filter we have tried the following:

Because when we look fod a Body Property of the EnsLib.DICOM.Document it shows this drop down menu:

However, it replies with an error:

ERROR #5540: SQLCODE: Message -29: Field

I am making a FHIR request against Epic, in when I get the Response back using "fromDao" I am extracting the stream into HS.FHIRModel.R4.Patient. However, the patient's name comes back as name within a list that references HS.FHIRModel.R4.SeqOfHumanName.

• How do I extract the name from HS.FHIRModel.R4.SeqOfHumanName?
• Do I have to then do another "fromDao" to pull the list into string format?
• How do I navigate around the lists that are in a FHIRModel response, to extract the string values?

So I have been working in Healthcare Interops for about a month now and in IRIS.I am looking to implement SMART on FHIR and I am currently working to make an endpoint that works as the discovery endpoint.It is a custom dispatch class and unauthenticated is selected for access.I am trying to make a simple get request from Postman to test that the proper JSON is sent, but I receive a 403 Forbidden error.It is reaching IRIS it seems so I know its not a reverse proxy error.Here is an example of my custom Dispatch Class.

Any plans for ODBC 3.8 support?

Hi Community,

Enjoy the new video on InterSystems Developers YouTube:

⏯ Discovering InterSystems Products - A High Level Overview @ Global Summit 2024

Hello community,
Is there any built in class method to get the HTTP request and response message format from the %request and %response object. Similar to how a Web Gateway's HTTP Trace Facility captures HTTP messages.

Thanks!

I am receiving a FHIR response bundle back with a resource of patient. Using fromDao, I attempted to take the stream and put it into FHIRModel.R4.Patient but it is not mapping correctly. When I attempt to take FHIRModel.R4.Patient and write it out using toString(), all I am seeing is the resource

{"resourceType":"Patient"}

so the response is not mapping correctly to FHIRModel.R4.Patient. How have others handled this? Do I need to translate it to an SDA since it does fit the model format?

HealthShare Unified Care Record Fundamentals – In Person (Boston, MA)* July 28-August 1, 2025

*Please review the important prerequisite requirements for this class prior to  registering.

• Learn the architecture, configuration, and management of HealthShare Unified Care Record.
• This 5-day course teaches HealthShare Unified Care Record users and integrators the HealthShare Unified Care Record architecture and administration tasks.
• The course also includes how to install HealthShare Unified Care Record.
• This course is intended for HealthShare Unified Care Record developers, integrators,

I have built a REST operation to submit a JSON Request Body, and in the JSON Response Object, I need to pull out certain values like pureID, portalURL, and under the identifiers array the ClassifiedID that has a term."en_US" = "Scopus Author ID"

{
    "count": 1,
    "pageInformation": {
        "offset": 0,
        "size": 10
    },
    "items": [
        {
            "pureId": 0000000000000,
            "uuid": "xxxxxxxxxxxxxxxxxxxxx",
            "createdBy": "root",
            "createdDate": "2024-11-18T22:01:07.853Z",
            "modifiedBy": "root",
            "modifiedDa