New post

#Docker

6

Docker is a software technology providing containers, promoted by the company Docker, Inc. Docker provides an additional layer of abstraction and automation of operating-system-level virtualization on Windows and Linux.

I wanted to write it as a comment to article of @Evgeny Shvarov . But it happens to be so long, so, decided to post it separately.

Image result for docker clean all images

I would like to add a bit of clarification about how docker uses disk space and how to clean it. I use macOS, so, everything below, is mostly for macOS, but docker commands suit any platform.

6 6
3 6.7K

Hi guys!

Was coding today with InterSystems IRIS in a docker container and decided to share with you the commands you may find useful in everyday coding.

# docker-compose build

command to build a container. Remember, it is useful if you have dockerfile in the repo.

if the build is successful call the following to launch it:

# docker-compose up -d

Find IRIS management portal on:

localhost:port/csp/sys/%25CSP.Portal.Home.zen?$NAMESPACE=%25SYS

where the port is what you set in docker-compose.yml - 52775 in this case.

Run the following if you want to launch a terminal session inside IRIS container:

# docker-compose iris iris session iris

gfhj gj 


sdfdsfsdf





USER>

And run the following to shut down the container:

# docker-compose down

Troubleshooting

5 4
4 604

Hi guys!

Portrait of Madame X, Gustave Caillebotte.

One of the features I like in InterSystems ObjectScript is how you can process array transformations in a specific method or a function.

Usually when we say "process an array" we assume a very straightforward algorithm which loops through an array and does something with its entries upon a certain rule.

The trick is how you transfer an array to work with into a function.

One of the nice approaches on how to pass the information about an array is using $Name and Indirection operator.

Below you can find a very simple example which illustrates the thing.

Open Exchange app
3 2
1 542

1. Purpose

This is a 10-minute simple step-by-step guide on how to quickly set up various flavors of HealthShare docker containers from scratch on a Win10 laptop.

For example, we can build a couple of HealthShare "global edition vs UK Edition" demos as shown below.

There are a couple of frequently asked questions from HealthShare colleagues and partners:

2 3
2 773

This is a continuation of my story about the development of my project isc-tar started in the first part.

Just having tests is not enough, it does not mean that you will run tests after all changes. Running tests should be automated, and when you cover all your functionality with tests, everything should work well after any change in any place. And Continuous Integration (CI) helps to keep the code and deployment procedure with as fewer bugs as possible and automates the routine procedures, like publishing releases.

I use GitHub to store the source code. And some time ago GitHub started to work on its own CI/CD platform and named it GitHub Actions. It is not widely available, yet. You have to be signed as a beta tester for this feature, as I did. GitHub Actions uses quite a different way how to deal with a build workflow. What is important that Github Actions allows to use Docker, and it’s quite easy to customize available actions. And interesting that GitHub Actions is really much bigger than any classic CI like we have in Travis, Circle or Gitlab CI and so on. You can find more in the official documentation.

3 0
1 596

I am just recently announced my project isc-tar. But sometimes it is not less interesting what’s behind the scene: how it was built, how it works and what happens around the project. Here is the story:

  • How to develop this project
  • How to test it
  • How to release new versions for publishing
  • And finally how to automate all above
  • Continuous integration

So, I would like to tell all about it.

2 0
2 522

Hi Community!

I think everyone keeps the source code of the project in the repository nowadays: Github, GitLab, bitbucket, etc. Same for InterSystems IRIS projects check any on Open Exchange.

What do we do every time when start or continue working with a certain repository with InterSystems Data Platform?

We need a local InterSystems IRIS machine, have the environment for the project set up and the source code imported.

So every developer performs the following:

  1. Check out the code from repo
  2. Install/Run local IRIS installation
  3. Create a new namespace/database for a project
  4. Import the code into this new namespace
  5. Setup all the rest environment
  6. Start/continue coding the project

If you dockerize your repository this steps line could be shortened to this 3 steps:

  1. Check out the code from repo
  2. Run docker-compose build
  3. Start/continue coding the project

Profit - no any hands-on for 3-4-5 steps which could take minutes and bring head ache sometime.

You can dockerize (almost) any your InterSystems repo with a few following steps. Let’s go!

7 10
9 1.5K
Article
· Dec 28, 2018 2m read
Docker-compose default network conflicts

I recently had to diagnose a networking problem I was having when attached to our corporate network. I was seeing an unknown bridge network being defined that shared the same IP address space as the company network thus blocking access to company resources. This bridge network was separate from the Docker0 bridge network which the docker engine sets up. Docker was configured with a bip (bridge ip) address to prevent docker form using an address space that create a conflict.

1 2
1 5.1K

GlobalSummit too close now, so many people going to be there from so many companies. I'm sure that somebody already uses Docker or even Kubernetes in their work, I do. And would like to share my experience and thoughts about what could be better. And want to hear other people about their experience, how you use Docker, what issues have you faced and how did you solve it. I think InterSystems will help us to find time and place when we could do it, and hope @Luca Ravazzolo will join us.

0 3
0 297

InterSystems supports use of the InterSystems IRIS Docker images it provides on Linux only. Rather than executing containers as native processes, as on Linux platforms, Docker for Windows creates a Linux VM running under Hyper-V, the Windows virtualizer, to host containers. These additional layers add complexity that prevents InterSystems from supporting Docker for Windows at this time.

12 12
6 3.7K

In this series of articles, I'd like to present and discuss several possible approaches toward software development with InterSystems technologies and GitLab. I will cover such topics as:

  • Git 101
  • Git flow (development process)
  • GitLab installation
  • GitLab Workflow
  • Continuous Delivery
  • GitLab installation and configuration
  • GitLab CI/CD
  • Why containers?
  • Containers infrastructure
  • GitLab CI/CD using containers

In the first article, we covered Git basics, why a high-level understanding of Git concepts is important for modern software development, and how Git can be used to develop software.

In the second article, we covered GitLab Workflow - a complete software life cycle process and Continuous Delivery.

In the third article, we covered GitLab installation and configuration and connecting your environments to GitLab

In the fourth article, we wrote a CD configuration.

In the fifth article, we talked about containers and how (and why) they can be used.

In this article let's discuss main components you'll need to run a continuous delivery pipeline with containers and how they all work together.

4 0
2 3.4K

In this series of articles, I'd like to present and discuss several possible approaches toward software development with InterSystems technologies and GitLab. I will cover such topics as:

  • Git 101
  • Git flow (development process)
  • GitLab installation
  • GitLab Workflow
  • Continuous Delivery
  • GitLab installation and configuration
  • GitLab CI/CD
  • Why containers?
  • GitLab CI/CD using containers

In the first article, we covered Git basics, why a high-level understanding of Git concepts is important for modern software development, and how Git can be used to develop software.

In the second article, we covered GitLab Workflow - a complete software life cycle process and Continuous Delivery.

In the third article, we covered GitLab installation and configuration and connecting your environments to GitLab

In the fourth article, we wrote a CD configuration.

In this article, let's talk about containers and how (and why) they can be used.

4 0
1 1.3K

In this series of articles, I'd like to present and discuss several possible approaches toward software development with InterSystems technologies and GitLab. I will cover such topics as:

  • Git 101
  • Git flow (development process)
  • GitLab installation
  • GitLab Workflow
  • Continuous Delivery
  • GitLab installation and configuration
  • GitLab CI/CD

In the previous article, we covered Git basics, why a high-level understanding of Git concepts is important for modern software development, and how Git can be used to develop software. Still, our focus was on the implementation part of software development, but this part presents:

  • GitLab Workflow - a complete software life cycle process - from idea to user feedback
  • Continuous Delivery - software engineering approach in which teams produce software in short cycles, ensuring that the software can be reliably released at any time. It aims at building, testing, and releasing software faster and more frequently.

7 1
3 3K

Everybody has a testing environment.

Some people are lucky enough to have a totally separate environment to run production in.

-- Unknown

.

In this series of articles, I'd like to present and discuss several possible approaches toward software development with InterSystems technologies and GitLab. I will cover such topics as:

  • Git 101
  • Git flow (development process)
  • GitLab installation
  • GitLab WorkFlow
  • GitLab CI/CD
  • CI/CD with containers

This first part deals with the cornerstone of modern software development - Git version control system and various Git flows.

16 1
4 4.4K

Container Images

In this second post on containers fundamentals, we take a look at what container images are.

What is a container image?

A container image is merely a binary representation of a container.

A running container or simply a container is the runtime state of the related container image.

Please see the first post that explains what a container is.

6 1
0 2K
Article
· Jan 31, 2018 3m read
Container - What is a Container?

Containers

With the launch of InterSystems IRIS Data Platform, we provide our product even in a Docker container. But what is a container?

The fundamental container definition is that of a sandbox for a process.

Containers are software-defined packages that have some similarities to virtual machines (VM) like for example they can be executed.

Containers provide isolation without a full OS emulation. Containers are therefore much lighter than a VM.

12 20
1 2.4K

Last week saw the launch of the InterSystems IRIS Data Platform in sunny California.

For the engaging eXPerience Labs (XP-Labs) training sessions, my first customer and favourite department (Learning Services), was working hard assisting and supporting us all behind the scene.

11 3
0 982
Article
· Dec 4, 2015 3m read
Atelier Beta Cloud Infrastructure

A few people wrote to me asking about the infrastructure behind the Atelier Server implementation. Its neat and a worthwhile story to share so I am writing it up here as a post on the community. I want to go in to a little detail on why it was needed and then I will outline in detail how we went about implementing this.

10 24
0 1K