we get HL7 MDM messages with embedded PDF documents that are Base64 encoded. When the embedded PDF document exceeds the size of 3.6 MB the following error occurs:
FEHLER <Ens>ErrBPTerminated: BP Main HL7 MDM # wird wegen folgenden Fehlers beendet: FEHLER #5002: Caché-Fehler: <MAXSTRING>zgetAtFromArray+46^EnsLib.HL7.Segment.1 > FEHLER #5002: Caché-Fehler: <MAXSTRING>zgetAtFromArray+46^EnsLib.HL7.Segment.1
As part of a BPL I am building I need to foreach over a some repeating elements and look for a certain value, if said value is present I need to forward the message to another operation.
I can't seem to get the if statement inside the foreach loop to work and I think I am doing something wrong?
The error message I am getting:
ERROR <Ens>ErrException: <UNDEFINED>zS2+2^GWH.Messages.Eobs.AKISegmentCheck.Thread1.1 *k1 -- logged as '-' number - @' Set k1=request.GetNextIndex("PIDgrpgrp("_(1)_").ORCgrp()",k1,.tSCTrans)'
I have a batch record mapper that reads a csv file and passes the message to a process that uses the EnsLib.MsgRouter.RoutingEngine and would like to pass the message to an operation that will output that as a XML file but so far been unlucky as the operation that I use , uses the EnsLib.EDI.XML.Operation.FileOperation which only works with the messages("BusinessOperation class for writing XML messages to a file.
In a HL7 Business Rule, I want to create a custom function that works on an HL7 message object (ENSLIB.HL7.Message). I extended the Ens.Rule.FunctionSet class, and have a class method that accept a ENSLIB.HL7.Message obj -
ClassMethod myfunction(msg As EnsLib.HL7.Message) As %Boolean, so I can call myfunction(HL7) in the rule's condition
For all Prosthetics orders: when ORC-1(Order Control) is "NW" (New Order), need to update OBR-18(Placer Field 1) based on PV1-2 (Patient Class) value. assumption is that the selection logic is that all prosthetics orders with OBR-18 field is always blank. Description : If PV1-2 is I, insert I in OBR-18 If PV1-2 is O, insert O in OBR-18 If PV1-2 is E, insert O in OBR-18 If PV1-2 is P, insert O in OBR-18 If PV1-2 is R, insert O in OBR-18 If PV1-2 is B, insert O in OBR-18
I have a handful of EnsLib.HL7.MessageRouter sending an HL7 message to a single Business Process (Ens.BusinessProcess).
In the OnRequest method, I am declaring pRequest as EnsLib.HL7.Message
What I need to do is determine which HL7 Router sent any given request to my BusinessProcess.
To do this, I know that I need to fetch the SourceConfigName property from the Ens.MessageHeader of the Request, but I am not sure how (or if) I can fetch this data from within the OnRequest Method.
I've been working on a very basic Interoperability production in my computer. I followed one of the examples in the courses and created a TEST.FileRouterRoutingRule, but when trying to edit this rule, it takes me to the Rule Editor Login Page, where I can't get in (Not even with the _SYSTEM credentials) - Is this functionality unavailable in the community edition?
Friends , can anyone help in how to kill instances of a business process? We have searched the documentation and looked in the Production, We am not seeing how to perform this task.
I am still trying to understand and come up with a use case to use FHIR as an enhancement to our existing HL7 messages. Does anyone have an example of taking a FHIR response and transforming it into a SDA?
How does the workflow go? Does it go through 1 BP?
Suppose I have an image and need to convert that image into a PDF for inclusion in an HL7.
I know that Zen Reports can display an image in a PDF but I do not want to view the image in a web page. I just need to convert the image to PDF in a Process and then include that PDF in an HL7. The workflow would be like this:
Get image -> Convert image into PDF -> Include PDF in HL7 OBX.
I know how to do the last part to include PDF in HL7 OBX. Just need ideas on the first part.
I am calling a business rule from one of my business processes and I noticed that when the business rule reports an error that the business process calling that rule just stops without any errors. Resultingly it fails to trigger the scope - catch-all construction that is surrounding the business rule. I know that it is possible to view the errors in business rules in the business rules log, but I really like to push an error message to Ens.Alert or something similar when my business rules report an error. How do I achieve that?
when I run the process I end up with the following error:
----
ERROR <Ens>ErrBPTerminated: Terminating BP Propirion.BP.GetServices # due to error: ERROR <Ens>ErrGeneral: Object is immutable + ERROR <Ens>ErrGeneral: Object is immutable
----
I have created a context named : HL7Message type of: EnsLib.HL7.Message and in the start of the BP assigned the request to it (using set in assigned activity)
I am using the EnsLib.File.PassthroughService class in the business service, this business service will accept a text file from a location and pass it through to the BPL as a stream. I have been trying to work with the BPL in the GUI and I have been reading the documentation and trying to get it to work but I can not I continue to get errors and I am not sure why.
I will attach the Photos of what I have been trying, I think there is a problem with my call action because when I try and trace the message the context of the file does not even make it to the business operation.
I am trying to use EnsLib.SQL.Operation.GenericOperation for retrieving (multiple) rows. But I am looking for a way to handing a StreamContainer returned by the operation, in my business process such as receiving it in the Context object and packing it to a request to call another business operation.
In a HTTP operation, which extends Ens.BusinessOperation, EnsLib.REST.Operation, one can read the component's AlertGroups property by simply referring to it with "..":
I have a production that takes in an HL7 message thru a business service. The business service passes the incoming HL7 message to a business process that calls a transform to transform the HL7 message to a message class. After the transform is finished, the business process uses a code block to pass the object created by the transform to a method class that processes the data in the object. What would be the correct syntax for passing in the object to the class method?
I have a code block in a BPL. I have the below SQL and code. All variables have been declared and set. When I run the SQL, if there are no values returned, I get 100 for the value of SQLCODE when I perform the FETCH, which is correct. If values are returned, I get a -400 error when I perform the first FETCH. I've investigated, but cannot find the reason for a -400 error. Hoping someone out here understands this and knows what's wrong.
I have created a BPL to process a file and create a lookup table. I am looking to add logic to use the original filename so that I can use a single BPL to create multiple tables. How can I access the original filename within a BPL?
maybe I am not looking in the correct spots, but how should one handle an Exception from a SOAP web service within the Business Process Language? For example I am sending a request to a Web Service to try to get information, but the response I am getting is an Exception like "Patient Not Found".
Is there a function I can call to check the response similar to what I do to check a SQL Snapshot to see if it is valued?
I have a call in a business process that returns a response which may contain a collection of error message. I use the following code in my response builder to extract the messge value from the first error and map them to a context variable:
Set context.ErrorMessage callresponse.result.GetAt(1).errors.GetAt(1).message
By replies.png)
.png)