Syndicate content 0  
 
All time

I know %CSP.Daemon is supposed to clean up old CSP sessions (?). In my management portal, under System/ License Usage, I see 33 "Units" used (and there are 33 licenses in use), but usernames from old IP address and that are not being used. Their active times are often in the millions of seconds. They are not "on" the system right now.

At most, only 3 users are on the system right now.

Are these supposed to be cleaned up? Can I clean them up programmactially, and how would I know if they're not active?

Thanks,

Laura

0 8
0 1.3K
Article
· Apr 20, 2016 1m read
Feedback on Product Documentation?

We are in the process of putting a new UI on the existing product documentation, including a mobile-optimized view. We also plan on releasing additional "solution based" documentation that is targeted at common usage scenarios or important configuration tasks.

We are interested in your feedback on our current product documentation - what you like and dislike and especially what changes you would expect to see to make it as useful as possible.

3 15
0 963

We are retiring a hosted application for an electronic health care records (EHR) system which stored the data on Cache for UNIX (Red Hat Enterprise Linux for x86-64) 2017.2.2 (Build 867_4_20245) Thu Oct 8 2020 16:58:40 EDT. The hosting company is providing me with a single CBK file. I need to install a database system to restore the database and provide occasional SQL access for reports when necessary. I'll need to maintain access to the data for an approximately 10 year retention period. Not sure how to approach restoring this old of a database and eventually upgrading it to a newer re

0 36
1 1.2K
Article
· Jan 11, 2019 4m read
SQL Performance Resources

There are three things most important to any SQL performance conversation: Indices, TuneTable, and Show Plan. The attached PDFs includes historical presentations on these topics that cover the basics of these 3 things in one place. Our documentation provides more detail on these and other SQL Performance topics in the links below. The eLearning options reinforces several of these topics. In addition, there are several Developer Community articles which touch on SQL performance, and those relevant links are also listed.

There is a fair amount of repetition in the information listed below. The most important aspects of SQL performance to consider are:

  1. The types of indices available
  2. Using one index type over another
  3. The information TuneTable gathers for a table and what it means to the Optimizer
  4. How to read a Show Plan to better understand if a query is good or bad
13 3
9 1.2K
Question
· Jun 21, 2018
COMANDO $ZF

Hello everyone

I have a problem with $ ZF (-1)

I need to delete file from windows folder example c: \ sys \ text.txt, when executing the w $ zf (-1, "c: \ sys \ text.txt") command, the file does not delete.
There is some other cache command that performs this task.

hugs

Davidson

0 8
0 1.3K

There is a large file that needs to be processed, with over 500 000 rows. Each row needs to be verified for various data and then all the results collated and reported into a single report. What is the most efficient way to do this? I tried calling the processing function with Job , where each function jobbed off would report results to a different node of a common global. But the jobbed functions are not updating their respective rows even though I am passing the global name and root node. What is the most efficient way to process this large file?

0 1
0 1.3K

Can anyone tell me how to discover in ObjectScript the operating system and operating system version that Caché is actually running in? (Not the operating system the build was compiled for.)

0 11
1 1.2K

Hello,

I've got a csp page that has successfully set up a websocket connection to a Cache class. When the websocket object's close function is triggered at the browser I was expecting one of the class' methods to fire at the server. The onclose method is triggered at the browser but nothing at the server. Is a method supposed to fire at the server?

Thanks,

Dan

Cache for Windows (x86-64) 2015.1.4 (Build 803_6) Tue May 15 2018 12:08:36 EDT

0 4
0 1.3K

Hi, all!
As I know, InterSystems recommends the use of Huge Pages. And if count of Huge Pages is enough, we'll see (in cconsole.log) something like this during Cache startup:

12/29/17-14:40:50:360 (3625) 0 Allocated 4630MB shared memory using Huge Pages: 4096MB global buffers, 256MB routine buffers

But if count of Huge Pages is not enough for location of all Globals and Routines caches, Cache won't use Huge Pages.

1 2
0 1.3K

Hello,

How to get XML subtree from XPATH.DOMResult object as Stream or CacheString.

Here is my classmethod. My system receives XML message which has nested structures. The requirement is to send one message at a time to the destination. I have created the XPATH document and used EvaluateExpression method and which returns XML.XPATH.Result of type DOM. I am able to read the dom and get value of the element and its text. But I am looking to send back the subtree.

Code:

0 8
0 1.2K

I'm using Cache SQL and want the ability to choose a specific index.

I've boiled the problem down to one table and simplified the query down to

SELECT *
FROM Registration.PatResp
WHERE SchedApptNum=8450022

SchedApptNum is indexed, but instead of using that column, "Show Plan" indicates that it's looping through the entire Registration.PatResp table on Id (the primary key for the table).

I've done a tune-table with no change.

0 6
0 1.2K

I already talked about GraphQL and the ways of using it in this article. Now I am going to tell you about the tasks I was facing and the results that I managed to achieve in the process of implementing GraphQL for InterSystems platforms.

What this article is about

  • Generation of an AST for a GraphQL request and its validation
  • Generation of documentation
  • Generation of a response in the JSON format
6 2
2 1.2K
Article
· Sep 13, 2022 8m read
CI/CD with IRIS SQL

In the vast and varied SQL database market, InterSystems IRIS stands out as a platform that goes way beyond just SQL, offering a seamless multimodel experience and supporting a rich set of development paradigms. Especially the advanced Object-Relational engine has helped organizations use the best-fit development approach for each facet of their data-intensive workloads, for example ingesting data through Objects and simultaneously querying it through SQL. Persistent Classes correspond to SQL tables, their properties to table columns and business logic is easily accessed using User-Defined Functions or Stored Procedures. In this article, we'll zoom in on a little bit of the magic just below the surface, and discuss how it may affect your development and deployment practices. This is an area of the product where we have plans to evolve and improve, so please don't hesitate to share your views and experiences using the comments section below.

12 6
0 1.1K

If you're interested in building a browser-based CRUD application for maintaining data on IRIS, check out the detailed, step-by-step tutorial at:

https://github.com/robtweed/qewd-microservices-examples/blob/master/WIND...

To get a preview of the application you'll build in the tutorial, along with background on its technology stack, watch this video:

https://www.youtube.com/watch?v=d-NICYqv_2s

6 0
0 1.3K

We are creating a package (written in Caché Object Script) that will provide access to an external DB (MySQL). Because applications that use our package will be run from machines with various, potentially unexpected, operating systems, we’d like to establish a connection to the external DB without using DSNs (we’ve heard that setting up DSNs on certain non-Windows machines can be cumbersome and problematic).

0 4
0 1.3K

Hi, I am trying to transform a message to meet a third party specification, and would like to know if you can advice me on how to separate a single OBX segment into several segments based on a '.'

I would like to separate the segment where the . [marked in red] is into another OBX segment. So the next segment would be:

0 8
0 1.2K
Article
· Jul 4, 2019 1m read
Install EnsDemo on IRIS

Has you may know, EnsDemo from Ensemble are not available anymore on IRIS.

This is a good thing, Iris is cloud oriented, it must be light, fast. Now the new way of sharing samples or modules is through git, continuous integration and OpenExchange.

But, in some cases you want to go back to your good old samples from EnsDemo to get inspiration or best practices.

Good news, there is a git for that :

Open Exchange app
4 1
2 1.2K
Announcement
· May 21, 2018
How is your code health

As a developer, usually I'm concerned about how my code health is, and how the other coders code can affect to my own work. And I'm quite sure most of us feel very similar.

In our company we use a Static Code Analysis tool to analyze code for different languages to ensure we are writing high quality and easily maintainable code by following a few best practices in terms of code structure and content. And the question was: why should be different for Caché ObjectScript language?

6 3
4 1.2K

Does anyone in the developer community have experience implementing a customized SDA3 container within HealthShare? There is a course on the learning site (ISC1086) that discusses how to do this, but it's currently listed as "coming soon" and I'm hoping to find some documentation.

1 2
1 1.3K
Question
· Aug 25, 2016
Iterate through global

Let's imagine I have a global like this:

^Users(12, "SETTINGS", "IsAllowed") = 1

^Users(41, "SETTINGS", "IsAllowed") = 0

^Users(52, "SETTINGS", "IsAllowed") = 1

Now I would like to check for each user whether they are allowed, therefore I'd need to iterate through the Global. How to do that? It seems that I can't use $Order here like such:

S FF = ""
For {
S FF=$O(^Users(FF,"SETTINGS","isAllowed"))
Q:$L(FF)
W "User ",FF," is allowed",!
}

Is there any other way of doing this?

0 5
0 1.2K

Hi guys!

As you know there are two (at least) ways to get the stored value of the property of InterSystems IRIS class if you know the ID of an instance (or a record).

1. Get it by as a property of an instance with "Object access":

ClassMethod GetPropertyForID(stId As %Integer) As %String

{

set obj=..%OpenId(stId)

return obj.StringData

}

2. Get it as a value of a column of the record with "SQL access":

0 18
0 1.2K