When testing a new routing rule, one frequently encountered problem is that messages that seem like they should be getting routed to a target component are not getting routed. This article aims to describe how to determine why the message didn't get routed.

1. Check the Event Log for the router to make sure there wasn't an error evaluating the rule or running any transformations referenced by the rule. If there was, debug that error first.

2 2
0 810

Caché Localization Manager

CLM is a tool for localization/internationalization/adding multi-language support to a project based on InterSystems Caché.

Imagine that you have a ready project where all the content is in Russian, and you need to add an English localization to it. You wrap all your strings into resources, translate them into English and call the necessary resource for Russian or English when necessary. Nothing tricky, if you think about it. But what if there are lots of strings and there are mistakes in Russian (or English)? What if you need to localize in more than one language – say, ten? This is exactly the kind of project where you should use CLM. It will help you localize the entire content of your project into the necessary language and retain the possibility to correct entries.

5 4
0 834

The DeepSee TroubleShooting Guide helps you track down and fix problems occurring in your DeepSee project. A common problem is finding less records than expected in a DeepSee Cube or a related Subject Area. The DeepSee TroubleShooting Guide suggests starting your investigation by checking the following:

Check cube for build restrictions

Check if maxFacts is used

Check if Build Errors are occurring

2 0
0 352

I tried to make atelier look more like XCODE with this simple trick or tip: change the default font to SF Mono and size 14.

To do it I did:

1) Install SF Mono font in the system which is the default font for XCODE and needs to be installed in order to use it.

You can find it in: /Applications/Utilities/Terminal.app/Contents/Resources/Fonts

Double Click SFMono-Regular.otf file and install it. You will get a warning of "serious problems" but it will work all right.

0 0
0 362

In this post I would like to talk about the syslog table. I will cover what it is, how you look at it, what the entries really are, and why it may be important to you. The syslog table can contain important diagnostic information. If your system is having any problems, it is important to understand how to look at this table and what information is contained there.

15 1
1 1,955

This article contains the tutorial document for a Global Summit academy session on Text Categorization and provides a helpful starting point to learn about Text Categorization and how iKnow can help you to implement Text Categorization models. This document was originally prepared by Kerry Kirkham and Max Vershinin and should work based on the sample data provided in the SAMPLES namespace.

5 0
1 550

This post is meant to provide a quick possible explanation for a very perplexing problem.

Scenario: You’ve just created your own administrative user in your 2014.1 (or later) instance of Caché. You gave it every possible security role (including %All), so it should in theory be able to do anything within the instance.

You’ve written a very advanced routine with a break command in it for debugging:

7 1
0 393
Article
David Marcus · Sep 7, 2016 5m read
Running HealthShare XSLTs from Terminal

HealthShare uses a lot of XSLTs. These are used to convert IHE medical documents to SDA (internal HealthShare format) and back to IHE formats, to create summary reports, and to deal with IHE profiles (e.g., patient information query, document provide and register). Customers may customize the XSLTs to customize reports or for other reasons.

For debugging and development, it is very convenient to be able to run an XSLT from Terminal.

11 0
2 1,120
Article
Sean McKenna · Aug 5, 2016 8m read
HealthShare's new SDA extensions

Creating and working with the new SDA extensions for storage of custom data elements

In HSCore 15.01, there is a new way to store custom data elements. HealthShare now had the ability to use custom extensions on many SDA elements.

This article will:

  1. Show how to set up your system to use SDA extensions
  2. Create a new SDA extension property
  3. Use the new SDA extension property in HL7 transactions
  4. Interact with the new data
  5. Show new SDA extension used in a customization of Patient Summary Report

8 2
0 2,541
Article
Leo Makowski · Jul 15, 2016 5m read
Zinsert and friends: Coding in terminal

While Studio and Atelier are useful development interfaces, there are occasionally situations where a quick edit needs to be made to code and only terminal access is available. A useful set of tools to do this are the zload, zprint, zinsert, zremove, and zsave commands. These are abbreviated to zl, zp, zi, zr, and zs respectively. While each of these commands has its own page in documentation, this article will synthesize that information with examples to provide instruction for their combined use.

5 2
1 594

NewBie's Corner Session 3 More Read and Write commands & Multiple commands

Welcome to NewBie's Corner, a weekly or biweekly post covering basic Caché Material.

Click on the Caché Cube in your system tray and select Terminal to try out the commands.

Write command with carriage return and line feed

When the exclamation point "!" is inserted after a Write command, a carriage return and line feed combination is produced. Note in this example, that a comma separates the exclamation point from the variable "X".

0 1
0 345
Article
Mike Kadow · Jul 10, 2016 4m read
NewBie's Corner Session 12 Do and Goto

NewBie's Corner Session 12 Do and Goto

Welcome to NewBie's Corner, a weekly or biweekly post covering basic Caché Material.

InterSystems Caché provides a GUI (Graphical User Interface) based Integrated Development Environment (IDE) called Caché Studio. Developers can use Studio to create and maintain applications.

Controlling Process Flow

Controlling Process Flow means controlling the execution path of code. The execution of code flows from the top to the bottom in a routine, except for the following:

0 0
0 245
Article
Mike Kadow · Jun 20, 2016 4m read
NewBie's Corner Session 8 Not

NewBie's Corner Session 8 Not

Welcome to NewBie's Corner, a weekly or biweekly post covering basic Caché Material.

Click on the Caché Cube in your system tray and select Terminal to try out these commands.

NOT operator ('), single quote or apostrophe

The "NOT" operator reverses the truth-value and is intended for numeric operands, however it can be used on alphanumeric operands.

0 9
0 410
Article
Mike Kadow · Jun 11, 2016 2m read
NewBie's Corner Session 7 True and False

NewBie's Corner Session 7 True and False

Welcome to NewBie's Corner, a weekly or biweekly post covering basic Caché Material.

Click on the Caché Cube in your system tray and select Terminal to try out these commands.

In COS, a 0 is false and any other number (positive or negative) is true.

0 0
0 292

NewBie's Corner Session 6 If and Kill commands

Welcome to NewBie's Corner, a weekly or biweekly post covering basic Caché Material.

Click on the Caché Cube in your system tray and select Terminal to try out the commands.

As in other computer programming languages, the If command is the primary decision makes.

If command with numeric operands

0 0
0 301

NewBie's Corner Session 4 The Plus Sign and Concatenation Operators

Welcome to NewBie's Corner, a weekly or biweekly post covering basic Caché Material.

Click on the Caché Cube in your system tray and select Terminal to try out the commands.

Plus Sign (+) operator

Typically, the Plus sign (+) adds two numbers together. This is true in COS (Caché ObjectScript), but COS uses it in other ways as well.

Set the variable X to a value of +12

0 0
0 336

Greetings! This article describes yet another simple way of creating installers for the solutions based on InterSystems Caché. The topic covers applications, which can be installed or completely removed from Caché with one action only. If you are still documenting installation instructions that have more than one step to do to install your application — it’s high time you automated this process.

5 14
0 1,428
Article
John Murray · Mar 6, 2016 2m read
Who does Windows think I am?

When my COS code is executing in a Caché process it might want to interact with the host operating system. For the purpose of this post I'm focusing on a Windows host, but much of it applies to other host OS platforms as well.

A common example of host OS interaction is when my process wants to read from or write to a file. What credentials will apply when Windows is checking whether or not to allow me access to the file?

To answer that we need to consider another question. How did our process start?

3 6
0 842