New post

#ODBC

7

Open Database Connectivity (ODBC) is a standard application programming interface (API) for accessing database management systems.

Learn more.

Hi all,

I'm trying to use LOAD DATA to insert 11k (11,377) rows of data. LOAD BULK DATA is not available for the version of IRIS I am using.

After calling LOAD DATA it says only 5,500 rows has been inserted. The LOAD DATA docs says any error rows are skipped and a count of skipped rows can be found in %SQL_Diag.Result however there are no results here. There are no errors in the xDBC error log either.

Why have over half the rows been skipped?

3 3
0 470

Hello, I need to use IRIS to connect to an MSSQL base.
It has to be done via ODBC, I can't use JDBC at this time by client option.

I am trying to use Microsoft Driver
libmsodbcsql-13.1.so.9.2

But I can't, my attempts result in:
Connection failed.
SQLState: () NativeError: [11001] Message:

I have done all DSN configuration, and my configuration is listed in SQL Gateway Connections. I know it's working, because when I run a test with isql I have the information that connects to the bank.

2 3
1 990

I have a MySQL server with "posts" table.

I also have a Caché server with "downloadedposts" table.

They are connected from Caché to MySQL via SQL Gateway

I want to keep Caché table synced with MySQL one (MySQL "posts" table is a master copy), so periodically Caché queries MySQL server and downloads data. So far so good, and if a record appears or changes in MySQL table, Caché downloads the changes.

The problem I'm encountering is that sometimes rows would be deleted from MySQL "posts" table.

How do I synchronize deletions?

2 4
0 1.2K

Hello everyone,

I'm trying to authenticate a user(Health Share clinician) from a Java Application.

I 'm already connected to Caché and able to run SQL commands.

My question is: How can I authenticate a user using only SQL? In fact, what I want is verify if the users exists in the base and if the given password is the same used in Health Share.

There is a column 'password' in Security.users table but I'm not able to see its content, even so, I don't know which hash function to use to compare with.

1 7
0 1.8K

Hi All,

I have a general query in regards to developers experience on extracting data from cache databases and the most efficient way to do so. I work with a number of clients who have applications with cache databases and require the data off the host system and onto data warehouse platforms for research and analysis. Often they require the data in source state which means the extracts are often simply a table scan of the entire database table without any aggregation or manipulation.

1 2
0 1.9K

Hi folks,

My fist post here and a tricky question right away!

I have a remote MySQL database table ("SomeData"; not under my control), and a Caché-class (remote.SomeDataAccess) linked to it via ODBC using the link table wizard.

The remote table has a field "id" which is the primary key and an autoincrement bigint value. This has been considered in the setup and the generated class has an

1 3
0 552

I am currently experiencing frustration with trying to Authenticate an Active Directory account through JDBC as the Hospital System moves from OnPrem SQL Server to using Azure SQL Server with Microsoft Entra Authentication.

Microsoft cannot give me a straight answer of what is required from a JDBC standpoint to authenticate from a Linux environment.

1 2
0 144

Is it possible to authenticate an xDBC (ODBC/JDBC) connection to InterSystems IRIS via (a 3rd party) OAuth server?

For REST APIs this is possible, but could this be achieved with OAuth?

Out-of-the-box the ODBC/JDBC Drivers don't seem to have this option, but maybe some custom code could enable this? perhaps via Delegated Authentication and some OAuth classes customization, or some other way?

Has anyone done this already and can share how it was implemented, or someone with some guideline suggestions?

1 0
0 214

I am calling a stored procedure over an ODBC connection and every time I call it there are several warnings written to the log event {Found no Parameter 1 (used as 1) for query}.I seem to be getting this on every query executed and that seems to happen a number of times the query parameters are per query and its filling up my disc.

1) Is there a way to suppress these warnings as the query seems to be executed and data written to the database?

1 1
0 327

Attempting to setup an outbound (I'm querying out, not querying the IRIS db) SQL connection. I am connecting to a PostgreSQL database, name "hl7interface".

I have setup the odbc.ini file at /usr/local/etc with the following contents:

[HL7Interface2]
Driver = PostgreSQL
Description = HL7 Interface DB
Servername = localhost
Port = 5432
Protocol = 7.4-1
#userName = postgres
#Password = <real pw here>
Database = hl7interface
ReadOnly = no
ServerType = Postgres

I have set the /etc/odbcinst.ini file with the location of the PostgreSQL driver:

1 6
0 313

Hi all,

I have a non objectscript application connecting to a cache instance via ODBC and one column is a list of serial objects. The output from the query contains a lot of special characters and I'm hoping there's a better way to get this data back so I won't have to perform extensive parsing on the application side.

I've tried using the $ListToString() function, but that didn't help much, probably because the list contains complex objects rather than primitives.

Any help will be greatly appreciated!

1 4
0 856

I created %ZSTART, having just learned about it. I included some minimal code to test it, as follows:
%ZSTART
SYSTEM
WRITE "SYSTEM.",!
QUIT
JOB
WRITE "JOB.",!
QUIT
LOGIN
WRITE "LOGIN.",!
QUIT
CALLIN
WRITE "CALLIN.",!
QUIT

Now Terminal still works as normal, and sure enough I get "LOGIN" displayed, but when I start Studio I get an error message such as the following. I wonder what Caché ODBC has to do with it.

1 3
1 240

Hi!

I was trying to create a query that can be exposed as a stored procedure (function actually) that would return a resultset with a random number of columns.

Unfortunately, it seems that unless I specify the ROWSPEC annotation on the Query method, I won't get any columns exposed. I was hoping to implement QueryNameGetInfo method and specify the names and number of columns I would be returning dynamically. But it seems that GetInfo information is simply ignored.

Here is my code:

1 5
0 757

I ran the below query in three different modes. Coordinated Universal Time is 5 hours ahead of Eastern Time so there is difference in value from column 1 and column 2 in ODBC, Display mode, but not in Logical Mode. By default the query executes in ODBC mode when we query the data from outside world(via ODBC connection).

I don't know why query 2 and query 3 outputs different from query 1.

Query 1. Ran in Logical mode, DATEPART() took in memory stored timestamp data(stored in UTC)

0 3
0 514

Hello everyone,

Im just wondering if there is any possibility to "Listen" to a cache DB? We have our cache DB somewhere else provided by a different company, we are provided the interface to connect to that cache DB so we can extract the cache DB every night.

Im just curious if theres a way to "listen" to the cache DB, so if theres any changes on the table in the cache DB, I could make a trigger to extract the table again.

I know i could just set my ETL every hour or so... but that would extract all the tables in cache DB.

0 9
0 913
Question
· Aug 20, 2020
Programs and function cache

Hi,

Do you know if cache has programs and functions cache

I made a backup of my production base and when I use this function abouve I receve an error, but if I change any letter of the command the function go ok.

Didn´t work
SELECT $$JOB1^KMIGxDESIG() FROM DUAL

Work
sELECT $$JOB1^KMIGxDESIG() FROM DUAL

for this I.m using ODBC 64.

Thanks

0 1
0 348

I am a newbie who is trying to learn how to set up a basic connection to Iris using a node js application. I am astounded at the lack of documentation there is on how to do this and even more concerning there are a few errors within the documentation. For example I am on the Native API application within the below link.

https://docs.intersystems.com/irislatest/csp/docbook/DocBook.UI.Page.cls...

0 5
0 369
Question
· Jan 26, 2023
Using ODBC on linux

I already have a working setup with:

- Ubuntu 21.10
- Unixodbc 2.3.6
- ODBC-2018.1.5.659.0-lnxubuntux64
- libcacheodbcur64.so

I have tried to update to:

- Ubuntu 22.04
- Unixodbc 2.3.9

But, i am getting "SQLDriverConnect: 0 [unixODBC][Driver Manager]Driver does not support the requested version".

So, I have tried to switch to:

0 1
0 416

I am experiencing an issue while executing a stored procedure in InterSystems Cache. Here’s the procedure I created

CREATE PROCEDURE Silk.sp_InsertRecord (
IN RecordDate TIMESTAMP,
IN UserName VARCHAR(50),
IN RecordType INT,
IN RecordID VARCHAR(50),
IN CategoryID INT,
IN ApprovalDate TIMESTAMP,
IN FileSize BIGINT,
IN WorkstationName VARCHAR(50)
)
BEGIN
INSERT INTO DummyRecords (
RecordKey,
FilePath,
RecordDate,
UserName,

0 0
0 159