New post

#Mirroring

8

Mirroring is an InterSystems technology for High Availability, Disaster Recovery and Database Backup and OLAP solutions.

Documentation.

Is it possible to use one IIS server to configure Webgateway and external Webserver for management portal when implementing synchronous mirroring with VIP i.e Is it necessary to have two mirror servers(primary and Backup) , one Arbiter server, one Webserver for Webgateway and a sperate webserver for management portal?

If anyone can please point to any documentation on Mirroring with Webgateway and external webserver for management portal will be really helpful.

Thank you for your help

0 6
0 111

The SYS.Mirror CatchupDB() method requires a System File Number/Inode value as a parameter. I have not yet found a suitable internal method to get this value. Is anyone aware of a utility method that would do this? I do know I can get this value with a small amount of Python or by calling out to the OS. However I wanted to stick with pure Objectscript in this project if possible.

Failing in this I will use embedded python to run the line or two of Python needed to get this value.

Thank you for any hints

0 5
0 80

Hi! I am planning to move my Arbiter from a Unix server to a container(again on linux). To do this, I need the ISCAgent tar.gz file to configure Arbiter for our mirrored servers. I have tried searching for it on the Intersystems help forums but couldn't find it. Is it possible for someone to redirect me to the correct website to download it?

Thank you in advance!!

0 2
0 172

We recently went through an Audit of our Security Policies and Procedures when it comes to IRIS. As a result of that Audit, we need to make adjustments to the way that Security is setup within IRIS. I have already done my changes on our TEST and DEVELOPMENT environments, but now I am trying to plan out how do we make these changes in Production.

These changes include moving away from the PWS, setting up Apache/Web Gateway, moving to LDAP instead of using Delegated Authentication, updating Web Applications, updating Resources, updating Services, etc...

1 4
0 142

I had a question about using ZSTART, ZSTOP, and ZMIRROR.

  • If we use them and it is not correct, does it mess up with any of the existing functionality?
  • So, if I create a ZSTART with a simple command of starting the %JDBC Server will that mess up anything existing in the Startup sequence?
  • Is ZSTART, ZSTOP, and ZMIRROR just an extension of the existing functionality, or does it alter how the built in functionality runs?
  • Should we tread lightly in the use of them?
2 7
1 285
Question
· Oct 15, 2023
MIRROR for Embedded Python ?

MIRROR is the best solution for almost immediate replications to a Failover Server.
The related mechanics are based on Global Journaling.

Globals hold Data and Classes and Routines and more ...
If Mirroring is in place all is in sync. With minimum delays
This is of course rather useful for code changes in Classes, Routines, ....

To what extent is Embedded Python covered by Mirroring?
Or:
What is required to Synchronize EmbeddedPython like Mirroring.

1 2
0 169
Question
· Sep 7, 2023
Question about ISCAgent Config

We are noticing some issues with the communication between our Arbiter and our servers. Looking at the following documentation to limit connections, and logging...https://docs.intersystems.com/irislatest/csp/docbook/DocBook.UI.Page.cls?KEY=GHA_mirror_set_config#GHA_mirror_set_agent_port

if I am configuring the ISCAgent on the arbiter, would we set

1 3
0 319

Hello Everyone,

We currently have CSP application that runs under 2 servers(usually primary), and every month the server reboots for patching SERVER1(primary) in the morning and SERVER2(backup) at night.

Whenever the SERVER1 reboots SERVER2 behaves as primary and when SERVER1 comes back up it will act as backup server.

First Patching:

So, when SERVER1 is down, I need to start httpd service for SERVER2 and stop httpd service for SERVER1 (which is now backup server).

0 5
0 247

Hello everyone!
Maybe someone will tell me what could be the reason for such messages in the message.log file

05/03/23-06:46:27:155 (6584) 0 [Utility.Event] [SYSTEM MONITOR] Mirror state: Member type = Failover, Status = Transition
05/03/23-06:46:27:350 (1620) 1 [Utility.Event] Failed InstanceLookup (agent probably not running): instance not found
05/03/23-06:46:27:351 (1620) 2 [Utility.Event] Failed to become either Primary or Backup at startup

0 6
0 333
Question
· Mar 7, 2023
Questions about using ZSTOP

I am working on setting up our Failover techniques as we move to a Mirror Environment with a Arbiter, 2 Failover Nodes, and a Async (DR) Node. There are some system commands that I would like to call when the Mirror moves, and I am working on a ZMIRROR routine for that, but I also wanted to create an additional step if we wanted to manually shutdown and for the Mirror to move. So I was looking at using ZSTOP to call a couple of different items while shutting down, while the documentation has an example a couple of questions come to mind about using ZSTOP.

0 3
0 293

I am new to setting up a mirror environment....

We will have a Arbiter, Two Failover members (A,B), and a Async (DR) member (C). I have the two failover members in sync and are configured for Arbiter Control.

My question is about the Async member, when I initially set it up I pointed it to the mirror on the primary node A.

Is that correct?

0 8
0 277

Does anyone have experience with installing the Arbiter Container using Podman instead of Docker in a Red Hat environment? I was able to pull down the docker image, but unsure what are the next steps as I am confused on how to start the container using Podman and ensure the parameters are set appropriately? Does anyone have the steps that I should take? Should I go through the WRC? Does the WRC have experience using Podman?

Or should I just install the ISC Agent instead of using the Container?

Please and thanks,

Scott Roth

0 7
0 494
Question
· Oct 7, 2022
Mirror Failover Settings

Hi All,

Our mirrored HealthShare environment has failed over a few times recently due to underlying infrastructure issues (that are being worked on and resolved).

In the HealthShare logs we are seeing:

10/06/22-00:54:35:925 (4736) 1 Journal Daemon has been inactive with I/O pending for 10 seconds:
gjrnoff=524741316,iocomplete=523852600,filecnt=1011,fail=0
10/06/22-00:54:55:086 (4736) 3 CP: Pausing users because Journal Daemon has not shown
signs of activity for 30 seconds. Users will resume if Journal Daemon is active again

My question is:

0 4
2 482

Hi

This morning I noticed that the ISCAgent.log for one of my high availabilty healthconnect servers has many entries that say:

"Mirror remote control command requested access to instance directory not found in registry."
Requested:d:\intersystems\healthconnect\

In addition, Messages.log has many of the following entries:

0 1
0 274

Hi All,

When I log into Backup mirror member it becomes too slow to load and navigate, I tried to check message log and I saw the error message about Database mirror latency and database disk issue which when I check it looks fine to me. Please have a look at the below screenshots and advise what the issue could be.

When I run df -h through SSH :

200G is the volume size, 194G is used space, 6.5G is available space and 97% IS %Use

0 3
0 330

Hi:
The task Mirror Monitor Launch Task recently failed and is placed in Suspend leave. Although it says USER it is not known as a task for us.

The code runs is HSSYS which is not our main system or namespace for production items.

The task name is HS.Util.Mirror.Task runs

If $system.Mirror.IsMember() Do ##class(HS.Util.MirrorMonitorAgent).StartAgent() and just says the description

/// This is the task definition that Launches the mirror monitor on any mirrored instance

0 1
0 339
Question
· Aug 4, 2021
Azure Mirroring - VIP

Has anyone firstly got VIP working for mirroring in Azure? We are pretty sure that this won't work but I wanted to verify it.

Has anyone used the Azure Load balancer to act as a Virtual IP and if so was a application gateway required.

Interested to know your experiences in getting this working.

0 9
0 627

Hi,

I have a DR member and in this cache server the database "cachetemp" start to getting bigger without any reason (50GB that was all the free disk space we have)

In the members of the mirrors the cachetemp its ok and the size is 31MB.

I restarted the server because I read that the cachetemp database purge when restarting, but didnt happend.

Any recommendation to clean this database? can I just deleate the CACHE.DAT from this database?

Thanks!!!

0 4
0 873

Hi,

I'm trying to add a DR async member to a mirror but when I add this member I get this messages in the mirror monitor (on the DR member):

The message im talking about is the "missing Mirrored Databases report".

The only step I did was the " System Administration -> Configuration -> Mirror Settings -> Join as Async" an fill the blanks. Maybe Im skipping a step?

0 3
0 698