#InterSystems IRIS

Introduction

Hi folks!

Sometimes building an images via docker-compose.yml can take significant time.

And often after a minute or two of waiting it turns out that ports listed in docker-compose are busy and you need to start building process again with different ports or to turn down processes that took it.

Is there a way to check ports listed in docker-compose BEFORE starting the image baking process?

How do you deal with this problem?

Hi community.

I have an API that is deployed in my production (business service) and it calls to a business process to retrieve the information that is requested.

The problem that I have is that the calls are queued and it's creating a bottleneck 

The business process is taking more time than needed.

Is possible to configure the BP to process parallely the requests?

I'm thinking to increase the pool parameter, but I'm not sure if it's a good idea.

Best regards 

Looking at enabling long file paths (see https://learn.microsoft.com/en-us/windows/win32/fileio/maximum-file-pat…) on some Windows machines - does anyone know offhand if IRIS plays well with this in all respects?

Hi, I was wondering if anyone already dealt with this issue:
"System has been suspended for over X seconds, exceeding the maximum duration specified. Allowing system activity to resume. Any ongoing backup has presumably failed. Next InterSystems IRIS backup must be a full one"

our backup system "Commvault" is automatic, how do you tell it once you get this message that the next backup should be full?

thanks,

Eyal

We are excited to announce a new part of InterSystems documentation that makes it easier to upgrade InterSystems IRIS® data platform, InterSystems IRIS® for Health™, or HealthShare® Health Connect. The Upgrade Impact Checklist at https://docs.intersystems.com/upgrade shows you all the things you need to consider – and only the things you need to consider – in an upgrade between any two versions. This takes all the content from our "Incompatibility History" and adds convenient filters, higher-level categories, and the ability to export the list as a CSV file so you can use it as a true

A class (and routine) definition can sometimes differ from it's compiled state.
When such a thing occurs, a "+" sign will be shown in the tab of the file opened in Studio.

I would like to do the same check programmatically.

For routines, it's very simple : 

set routine=##class(%Routine).%New(name)        
write routine.UpToDate

For classes, I could not find the equivalent. The only solution I found so far is to compare the compilation date and definition date :

Hi.

How can I pass a large string to classmethod params (e.g. large pictures) without getting MAXSTRING error?

Regards,
Matjaž

Is it possible to authenticate an xDBC (ODBC/JDBC) connection to InterSystems IRIS via (a 3rd party) OAuth server?

For REST APIs this is possible, but could this be achieved with OAuth? 

Out-of-the-box the ODBC/JDBC Drivers don't seem to have this option, but maybe some custom code could enable this? perhaps via Delegated Authentication and some OAuth classes customization, or some other way?

Has anyone done this already and can share how it was implemented, or someone with some guideline suggestions?

Do you ever spend an age entering criteria in the message viewer page, trying to find a message just to realise you're in the wrong instance of IRIS? 

Or get lost in a sea of message tabs struggling to spot that Visual Trace page your were JUST looking at?

Well, have you tried the IRIS WHIZ browser extension and its suite of tools designed to help you avoid such unpleasantness?

A customer contacted me with a problem trying to install Health Connect 2023.1 in a server with Red Hat 8 (no idea what 8.? it is). After review the logs the only error received are:

/tmp/HealthConnect-2023.1.0.235.1-lnxrh8x64/package/healthshare_databases/parameters returned 1.
	
	doParameters /tmp/isc_package_tmp_pid_21033/parameters.isc /tmp/isc_package_tmp_pid_21033 /var/log/isc/IRISInstall_202401191303.log healthshare_databases

...failed CallCommand healthshare_databases.package ...
...skipped databases.package for lack of healthshare_databases.package...

 And:

Lately my group has been seeing issues when signing in through the Management Portal or VS Code we are getting "Service Unavailable" errors returned to us. We recently migrated away from using the PWS to using Apache/InterSystems Web Gateway and using LDAP instead of Delegated Authentication. 

I have been on the hunt to find out where the problem might lie. When I run the "Test LDAP Authentication" from within the Management Portal, eventually I receive a response after getting a couple of timeouts while waiting for the response.

Hi community,

We have a developed a new version of a production, all the code is new and has changed BP. This application load information for some brands and stored in database.

The customer wants to implement the changes only for some brands because he wants to check for small brands before to implement for all brands.

My proposal is create a new namespace, with the new code, and disabled all load of brands except the brand that he wants to check.

I'm wondering what is the best way to clone the namespace.

Hello,

First of all thanks for your help reading and answering this question, and thanks for your time.

We have been investigating how to handle the following need:

Our client which has the system which reveices our ESB's responses needs a SOAP response as follows, where all the ACK is inside a top XML tag called <ACK>:

Hello,

How can I send a request via a SOCKS5 proxy in IRIS, using, for example, EnsLib.REST.Operation?

Background

I need to access APIs inside my corporate network, to which I don't have direct access from my home office. I've set up a SOCKS5 proxy via SSH on my host machine like this:

ssh -D 9999 server.corporate.com

I can then make requests with curl to the APIs I need:

curl -x socks5h://localhost:9999 https://api.corporate.com/api/some/endpoint

And I receive a response. Simple!

Also, inside the containerized IRIS, I can execute the request:

Hi Community!

Coding guidelines discussion. Consider you have For with one command in the cycle. Here are the options:

One

For i=1:1:1000 set ^Test(i)=""

Two

For i=1:1:1000 {
 set ^Test(i)=""
}

Same for the "If":

if a set b=a

or

if a {
 set b=a
}

Your choice? Or maybe even other options? 

Hello everyone!
I am wondering how I can retrieve multipart form-data from a request that is coming into my REST-service.
I am supposed to retrieve a string and a file. The file is being retrieved without issues, but the "testprofile" string is not being retrieved at all.
It just logs a an empty entry. 
The request that is sent to my REST-service has the Content-Type: multipart/form-data
Thanks beforehand for the help! :)

Down below is the code I use right now to retrieve the string and file from Form-data Rest HTTP-request to my service.

Hello everyone!
I am receiving a HTTP multipart/form-data request into my rest service.
How can I read the values for each Key in the form?
The key "Profile" is sent to my service as a String data type.
The code I have below does not seem to work, where I try to read the Key profile in the form.

I appreciate all the help I can get! :)

Hi all,

When is a Developer Community post not a Developer Community post? When it's just a few sentences wrapped around a link to InterSystems documentation! And what better way to finish up 2021 than by telling you about something cool that's been available since v2020.3? As the ball drops in Times Square, curl up with this:

Repeating Previous Commands

I think it will bring you joy! Post your favorite aliases below. Happy New Year!

I have a production that writes x12 file with a EnsLib.EDI.X12.Operation.FileOperation. I am trying to get file name that was used back to the business process. What is the best way to do this?

Hello, we deploy IRIScluster using IKO on Red Hat OpenShift deployed in AWS. For DR, we have another AWS region on stand by. We do daily backups. I run a standalone IRIS in the second region. I want to add it as async member to the mirror to have some essential data available in the standby region. Is this possible?

Hi, developers!

Currently, I'm working on a project that requires highly dynamic event management. In the context of the Java programming language, my first instinct should be to opt for the "Observer Pattern", which is an approach to managing interactions between objects by establishing a notification mechanism. It allows multiple observers to react to changes in the state of a subject autonomously, promoting code flexibility and modularity. If you are not familiar with this design pattern, check out Wikipedia to find more information about it.

While it's natural and commonly used in certain programming languages as Java and C++, in ObjectScript, it's quite a different story.

InterSystems FAQ rubric

If the system does not stop for 24 hours, old journal files will be deleted at 0:30 according to the "Journal file deletion settings".

A possible cause of journal files remaining that are older than the "Journal file deletion settings" is that there are transactions that remain open.

In that case, you will be able to delete the journal file by searching for processes executing transactions and finalizing the transactions.

The sample below checks for the existence of open transactions, and if they exist, outputs the target file name and journal record information.

Hi All,

I have ROUTINE for Get Data end of day. Routine Name is "getTicket.mac" . previously i execute at studio using this command to get data 

w $$getTicket^production.etl.getTicket() and the result success as we want, in this case i want execute routine using BS ( Business Service ) and i want this routine execute every night at 12.00 AM

how to implement this condition.

Thanks For your help and time

Hi Team,

I want to create a task in the task manager to manage the member details. so what i have done let me first brief you :-

1) Created a persistent class to store the custom csv details into a sql table.

2) created a business service to take the custom csv file from a inbound folder and use this class (EnsLib.RecordMap.Service.FileService) to use RecordMap.

First i have created CSV Wizard then RecordMap then DTL and map the fields with csv values.

When exporting a %JSON.Adaptor inherited class, undefined %Boolean properties are exported to JSON as "false" instead of null or empty

is there any way to control this behavior?

Class Test.Json extends%JSON.Adaptor
{
    Property bool as%Boolean;
}

set test = ##class(Test.Json).%New()
do test.%JSONExport()
{
    "bool": false
}

The ideal number of table permissions to assign for your users is zero. Permissions should be granted upon sign-in based on the application used for access. For web applications, we have a simple way of doing this by appointing application roles, matching roles, and required resources in the System Management Portal.

ODBC and JDBC connections present a different problem, however, especially when third-party applications are involved. As providers of an ERP system, our customers often wish to be able to employ various software packages to integrate with or report on their data. Many of these programs are capable of running any kind of query. Yet, letting them do that can be devastating to a customer’s data.

Tring to Performing following script in IRIS but do not know how to format Date. Normally, I would use TO_DATE or TO_TIMESTAMP in the actual queue statement below, but since I'm using Prepared Statements, I do not know how to format date in 'values' that is being used in the %Execute. It generates errors. I'm updating an Oracle Database via a SQL JDBC Gateway Connection. Does anyone know how to pass in Dates? 

Books Table definition

Hello,

I need to make an LDAP query to retrieve information about a specific team of employees. I have a custom service that instantiates a message of type EnsLib.LDAP.Message.Search with a filter matching the search and redirects it to an operation of type EnsLib.LDAP.Operation.Standard. I didn't get any errors, but I didn't get any results either. So I created an operation that inherits from EnsLib.LDAP.Operation.Standard and I overloaded the method to retrieve something. I get this:

Hello Community,

The process private global doesn't impact the $storage. But, Why the value has decreases at first time of initialization. 

Just want to ensure about it.