#HealthShare

I have an application that is requires an Encoded HL7 message sent over SOAP over HTTPS using SSL/TLS... the Response that is return is also encoded, which I know how to Decode but not sure when I Decode the response how to Extract the HL7 message to send back to the router.

How do I capture the Routing Source System and parse the encoded message back into an HL7 format that would show on the trace viewer?

Below is an example...where I get the response and want to send it back to FeederScottRouting as an HL7 message that can be tied to the Parent ID of the sending request message?

We have a vendor that is requiring that the HL7 sent to them is sent as an Encoded message inside a SOAP request but is sending back an HL7 message as the response. 

When the WSDL built the response, it was expecting an encoded message back. I updated the Request and Business Operation to expect an EnsLib.HL7.Message, however I am not sure how to handle the HL7 ACK to post it back to the sending message so it will not cause an Orphan message, and to parse it back correctly in the trace viewer.

When I do a $$$LOGINFO on the pResponse, I get back...

I am having issues trying to send SOAP requests to a Cloud Based AWS Application that lives outside of our network. 

It is using a Basic Authentication, Key, Certificate Authority and Whitelist for Security. 

If I attempt the connection using wget from the command line I am able to connect,

:>wget --bind-address=10.95.129.245 --server-response https://xxxxxxxxxx/xxxxxxx/services/Mirth
--2025-06-06 15:54:51--  https://xxxxxxx/xxxxxxxx/services/Mirth
wget: /ensemble/.netrc:16: unknown token xxxxxxx
wget: /ensemble/.netrc:16: unknown token xxxxxxxx
Resolving xxxxxxx.com (xxxxxxx). 34.233.89.

Hey everyone,

I'm diving deeper into Caché ObjectScript and would love to open a discussion around the most useful tips, tricks, and best practices you’ve learned or discovered while working with it.

Whether you're an experienced developer or just getting started, ObjectScript has its own set of quirks and powerful features—some well-documented, others hidden gems. I’m looking to compile a helpful set of ideas from the community.

InterSystems EMPI (formerly HealthShare Patient Index) – Virtual  July 9-11, 2025

• Configure, tune, and work with InterSystems EMPI, an Enterprise Master Person Index
• This 3-day course teaches the installation, configuration, and use of InterSystems EMPI™ (formerly HealthShare® Patient Index).
• Starting with version 2025.1, HealthShare Patient Index has been renamed to InterSystems EMPI, but the core functionality remains the same.
• Day one focuses on person identification issues, and the tools that can be used for reviewing records identified by the system for human attention.

For those that use IRIS for Health, HealthShare, and or Health Connect...

As Health Applications are moving to the Cloud, how have you handled communication from the Application to your instances via HTTPS?

Trying to figure out the best path on designing the proper workflow to allow these messages to be allowed to be eventually sent to our EMR to post to the patient chart.

We are very wary of opening a connection from the internet to our instance of Health Connect.

Thanks

Hello Everyone,

The Certification team of InterSystems Learning Services is developing two new HealthShare Unified Care Record certification exams, and we are reaching out to our community for feedback that will help us evaluate and establish the contents of the exams. Please note that these exams will replace our HealthShare Unified Care Record Technical Specialist exam that we plan to retire in January 2026. Certifications earned in this technology before the exam’s retirement will remain valid for five years from the date of achievement.

How do I provide my input?

I am having a hard time trying to figure out the following...

Within a DTC, I was able to take the a EnsLib.HL7.Message source and using

set a= $System.Encryption.Base64Encode(source.RawContent)
set encodedMessage=$Get(a)

to take the HL7 message encode it and add it to the Data Class as a string to be sent to an Operation to be sent out as a SOAP Request. 

However to make it more universal I tried doing this within a copy of EnsLib.HL7.SOAPOperation

Method SendMessage(pMsgOut As EnsLib.HL7.Message, Output pMsgIn As EnsLib.

Does anyone have a copy of the Class EnsLib.File.CSVService, which can import a CSV file in a Business Service?

I have created a New Database/Namespace within our TEST environment on both the Primary and Backup of the mirror. When I go to create the database/namespace on the DR node I am getting "Cannot open file '/ensemble/TEST/iris.cpf_...." while the cpf file that it references does not exist. Anyone have any clue to why this might be happening?

Hello All,

No matter what I try in Business Process Logic (BPL), I am unable to calculate the patient's age in days or years.

Has anyone ever built logic in a Business Process (BPL) to calculate a person's age in days?

Thank you!

Hi,

While HL7 Errors ACKs come back in the soap response, the HL7v2 Error ACK message is not processed. 

I used the SOAP Wizard to construct my classes, but the generated code doesn't handle the HL7v2 ACK.
Does health Connect have a class that handles this?

Failing an official solution should I go ahead and make make my own classes based on EnsLib.HL7.Operation.TCPOperation, but wrapping it with the generated SOAP handling code.

How have others dealt with this?

e.g.
<?xml version="1.0" ?>
<!-- type: LNW.WebService.PKB.Response.

I have a Task that I am trying to write the output to a file. How do I check for if the Output File has been included in the Task Schedule, so I can direct my output of my class to that output file?

Thanks

Scott

Hi All,

I am trying to build a very basic data transformation to convert messages from OML^O21 to ORM^O01. However, I'm unable to loop through multiple ORC segments.When I use the source document type 2.5: OML_O21, I am not able to loop through multiple lines of the ORC segment.Interestingly, if I use the source document type 2.3: ORM_O01, I am able to loop through multiple ORC segments successfully.I am currently using the following data transformation logic:

Hi Community,
i'm trying to figure out how to pass a string to a routine from Powershell:
 

####

ROUTINE ImplUtil

Say(pSomething = "hello, i'm the ROUTINE") public{
    w !,pSomething,!
}

####

call: irissession healthconnect -U user 'Say^ImplUtil(12345)'

what's the right way to pass in text?

George James Software is excited to share a new release of Deltanji source control, version 8.1. This new release introduces a Git Location Driver along with several other functionality and usability improvements. 

Highlights of this release include: 

• Git Location Driver, which enables Deltanji to integrate directly with Git repositories.
• Additional signing methods for Task Server II.
• DATA Component Driver proxy classes.
• Add or remove from Work Lists incrementally. 
• %ALL system definitions.
• New Installation defaults.

Is there a way in a EnsLib.SQL.InboundAdpapter that you can tell when you have reached the end of the Results of the Query?

Does anyone have a query that I could run to show a Vendor the time difference between when a message was sent out a BO, and when we received the HL7 ACK back that is associated with the message sent?

I am trying to prove to this vendor of the delay we are seeing getting the ACK back because of a Timeout

I know how to pull Ens.MessageHeader, and EnsLib.HL7.Message but not sure how to match up the Message with the HL7 Acknowledgement received.

Summary:

Duties and Responsibilities:

Design and implement healthcare data integration solutions using the InterSystems platform /HealthShare platform, ensuring data interoperability across various healthcare systems.

Develop and maintain data mappings and transformations to ensure accurate data exchange between systems, leveraging IRIS API’s, HL7, FHIR, and other healthcare data standards.

Build and maintain interfaces to connect health information systems, including clinical applications, EHR, and other healthcare data sources.

We're planning to use Production Validator for validating our system upgrade (2016.2.3 to 2024.2) , and we are trying to understand what kind of benchmarking or performance metrics others have observed during similar efforts.

Specifically, we are looking for a case study or real-world example that includes details like:

• How many messages were validated?
• How long did it take to create the temporary database from the source system?
• How long did it take to run the comparison on the destination system?

I am attempting to failover my TEST environment to the Backup, and I keep getting an error stating that 

06/01/25-18:47:54:516 (11864) 1 [Utility.Event] Primary startup failed, failed to read header of /archive/journal/MIRROR-IRISTEST-20250513.007 (file #63653)

however, when I go to /archive/journal/, I am not finding any record of MIRROR-IRISTEST-20250513.007 (file #63653)

to get out of this error message I have to restart what was the Primary and restart the Backup to get it back into a state that we can use it.

We are attempting to setup an EnsLib.SOAP.OutboundAdapter to send an HL7 message to a vendor hosted AWS site. We have the Certificate from the vendor and defined the TLS setting. However, when we are sending the message we are receiving...

Unable to open TCP/IP socket to server hcis-staging.cbord.com:443

So, we figured it might be a firewall issue. With the TCP Outbound Adapter, we could specify which "Local Interface" to use so that our firewall knew to use the VIP that had has been NAT'd. I don't see this option with the EnsLib.SOAP.

You know that feeling when you get your blood test results and it all looks like Greek? That's the problem FHIRInsight is here to solve. It started with the idea that medical data shouldn't be scary or confusing – it should be something we can all use. Blood tests are incredibly common for checking our health, but let's be honest, understanding them is tough for most folks, and sometimes even for medical staff who don't specialize in lab work. FHIRInsight wants to make that whole process easier and the information more actionable.

I have a question where I have over 30 000 records of data that I would like to send in HL7 and was looking at sending these in one bulk messages instead of individual messages in HL7.In this kind of a situation has anyone ever sent a bulk HL7 messages or is there a way of doing this other than using FHIR bundle.

IRIS supports CCDA and FHIR transformations out-of-the-box, yet the ability to access and view those features requires considerable setup time and product knowledge. The IRIS Interop DevTools application was designed to bridge that gap, allowing implementers to immediately jump in and view the built-in transformation capabilities of the product.

Profiling CCD Documents with LEAD North’s CCD Data Profiler
Ever opened a CCD and been greeted by a wall of tangled XML? You’re not alone. Despite being a core format for clinical data exchange, CCD's are notoriously dense, verbose, and unfriendly to the human eye. For developers and analysts trying to validate their structure or extract meaningful insights, navigating these documents can feel more like archaeology than engineering.

Hi Community,

Watch this video to learn about upcoming plans for HealthShare to incorporate change control capabilities for moving configuration changes across environments.

⏯  Change Control for HealthShare @ Global Summit 2024

I am struggling on how to pull out individual fields from a JSON. In a previous post someone had mentioned that I could...

  If ((tHttpResponseIsObject) && ($ZCONVERT(tHttpResponseContentType,"L") [ "application/json"))
  {
    set responseData = {}.%FromJSON(tHTTPResponse.Data)
    set pResponse = ##class(osuwmc.COM.Response.StringResponse).%New()
    if responseData.count =1{
      set pResponse.COMPortalURL = responseData.items.%Get(0).portalUrl
      set pResponse.COMPureID = responseData.items.%Get(0).pureId
      set pResponse.COMTitle = responseData.items.%Get(0).titles.%Get(0

I need to create a task to read the contents of file in an IRIS file system and store it in Persistent DB. What is the type of property thats defined in the Task that lets user select the input directory.

We have a scenario where we use the best practice article of a BP and DTL to split up HL7 messages mainly ORUS 

https://community.intersystems.com/post/splitting-oru-messages-using-ob…

It is really useful but we have this code in many places that we are trying to consolidate it in one place. 

We do not want to split it at the first stage in our rules as there is a lot of messages that go to sink. So we are trying for specific rules and the incoming hl7 matches certain rules and classified for certain downstream systems that it is then split and transformed.