#HealthShare

This message contains five recent HealthShare Advisories, which are available below.

InterSystems and Intel recently conducted a series of benchmarks combining InterSystems IRIS with 2nd Generation Intel® Xeon® Scalable Processors, also known as “Cascade Lake”, and Intel® Optane™ DC Persistent Memory (DCPMM). The goals of these benchmarks are to demonstrate the performance and scalability capabilities of InterSystems IRIS with Intel’s latest server technologies in various workload settings and server configurations. Along with various benchmark results, three different use-cases of Intel DCPMM with InterSystems IRIS are provided in this report.

Hello,

we are trying to figure out if there's a way to create a SOAP Envelope by using SOAP classes.

Right now we use a string to define the envelope element.

The string looks like :

Hello, 

I have a class I'm working on that is extending a base class that contains the %GetComponentByID method and a section of the new code I'm writing uses %GetComponentByID but when I attempt to compile the class I'm getting an error that says the method doesn't exist. 

Am I missing something to be able to include the GetComponent method in an extended class? 

Hello All,

I am able to transmit a small batch of billing files: B/W 5 and 20 without issue- 
Put stream 11@%IO.LibraryStream to /SFTP/unmhsmcsa/OUT/TEST_021920201426.tst  

But when the size of the batch increases to over 20 the operation hangs and I receive the error below:   The file is created in the SFTP server with 0 data.

ERROR <Ens>ErrFTPPutFailed: FTP: Failed to Put file 'TEST_022020201014.tst'
(msg='Error in SFTP Put('/healthshare/db/mgr/Temp/H8XaLoZgkYFkNQ.sftp','/SFTP/unmhsmcsa/OUT/TEST_022020201014.

Hi,

I open a specific file into a studio by using this command : Cstudio.exe /Servername=HEALTHSHARE/Namespace=User /files=MyClass.CLS

I would like not open a new studio when i execute a second time the command with one other file.

I would like open the second file in the same studio that the first file (I have to keep 2 calls)

For exemple  :

--> Studio is closed:

1 st call : Cstudio.exe /Servername=HEALTHSHARE/Namespace=User /files=MyClass.CLS

--> Studio open with my MyClass.CLS file

2 nd call : Cstudio.exe /Servername=HEALTHSHARE/Namespace=User /files=MyClass2.

I was searching for the most simple way to connect from visual studio code to my local instance via terminal without having to change any window.

I know this can also be achieved via telnet but seems a bit overhead if you're in your local machine.

For me the simplest sollution is to open a terminal window in VS Code, navigate to the /bin folder of your instance installation and run .\csession.

Preview releases are now available for the 2020.1 version of HealthShare Health Connect!

 Kits, Container images, and evaluation keys are available via the WRC's preview download site.

The build number for these releases is 2020.1.0.199.0.  (Note: first release was build 197, updated to 199 on 2/12/20)

HealthShare Health Connect 2020.

I've recently encountered a HS Caché that won't start informing that Collation 30 is not available, but I have not found an easy way of knowing what collation is 30.

I've found that the following command returns the ones from the current locale, but not from all locales:

Set Rset = ##class(%ResultSet).%New("%Library.Collate:CollationList")

d Rset.Execute()

While (Rset.Next()) {zw Rset.Number_": "_Rset.Name}

Thank you

*** Update 2/11/20 2:15pm ***

*** 2017.2.1 version is NOT affected ***

InterSystems has corrected a defect that can cause the CSP Gateway to forward a response to the wrong web client. This defect is not present in the Web Gateway.

The CSP Gateway is distributed as a component of a full instance installation and also as a standalone installer. Both distributions are affected by the defect. The CSP Gateway installed with the private Apache web server for the Management Portal is also vulnerable. The affected versions of the CSP Gateway are associated with Caché or Ensemble:

• 2016.1.

InterSystems has corrected a defect that can result in skipping a transaction rollback. This can only occur after activation or addition of a mirrored database on a primary mirror member.

This problem exists for:

• Caché and Ensemble 2018.1.3
• InterSystems IRIS data platform 2019.1.1, 2019.3, and 2019.4
• InterSystems IRIS for Health 2019.1.1, 2019.3, and 2019.4
• HealthShare Health Connect 2019.1.1

The conditions necessary for this defect to be triggered are quite specific. All of the following must apply:

• A database has been newly activated or added to a mirror on a primary mirror member.

Throughout my years working within HealthShare\Ensemble, I have been able to mimic the Data Lookup page trimming it down to give our Ancillary areas access to modify their own data Lookup tables.

I am currently working on building a CSP application to allow certain users to update MS SQL tables by going through HealthShare. I thought all I had to was create the CSP pages and grant access. I am able to access it off my desktop, but when I have a user try to access the application, they get the sign in but then it doesn't do anything.  So I think I might be missing something.

Hi 

I've got a new piece of work to do which the goal is to send an email out if files start queuing up in a specific folder.

Is there any way of achieving this?

Any help would be appreciated.

Kind Regards,

Joao Palma

Dear Developer Community, 

Would you like to earn a free certification exam voucher?

The Certification Team of InterSystems Learning Services has designed exam objectives and now needs input from our implementation community for the following proposed certification exam:

HealthShare Unified Care Record Technical Specialist

If you have completed at least one UCR/Information exchange (version 15.x or higher) implementation, assisting or supporting in a technical role, ObjectScript proficiency, and Health Connect interfacing experience, you can help us by filling out our Job Task Analysis survey.

Hello,

I am reading in an X12 document into my production that needs to be processed and returned as a CSV file.  I have created a record map to support the fields I want to extract with a batch class to store headers.  I have a DTL mapping the data to the appropriate fields in the record map and am sending the record map to a EnsLib.RecordMap.Operation.BatchFileOperation.

None of my components error out and in fact report that the message was processed without any errors but I am not getting an output file in my expected output folder. 

Is this an appropriate use of this operation class?

Hi,

I'm attempting to use the $EXTRACT function in my routing rule but I'm seeing 'Expression Parsing' error messages when trying to save the rule.

I want to check the last character of a post code by using the following code:

$EXTRACT(HL7.{PID:PatientAddress(1).ziporpostalcode},*)="Z"

Could anyone assist with this?

Thanks, 

Martin

Hi,

I’m working on a project to add specific PID data to an ORU_R01 message by querying our patient system and adding it to the ORU. Here is what I have 
managed to do thus far:
 
-    Received ORU_R01 message
-    Created Q21 message using the PID data included in the ORU message and sent to patient system to query.
-    Received a K21 message with the required PID data
 
I’m stuck at this point now. I want to add a specific piece of the K21 PID data (highlighted below) to the original 
ORU_R01 PID and was hoping you would be able to assist. 
 

I am doing this using Studio. I want to avoid using a BPL.

Ok so I am way outside of my comfort zone, and had to build an application using CSP to give users the ability to access SQL configuration tables. These SQL Configuration tables will affect the data that is sent to the downstream system. 

I saw in the examples where we were able to import GIF's/IMAGES into the CSP folders to use as a reference in our CSP pages. My question is how do you do that? If I try to import through studio, it tells me the file is invalid.

Just trying to make it a little more user friendly then blocks on a page.

We are currently using Health Share 2018.1.3

Thanks

Scott

Updated 1/30/2020

*** The affected product versions have changed ***

*** The affected versions are Caché and Ensemble beginning with 2016.2.0.  ***

*** Caché and Ensemble 2016.1.0 is not at risk for this defect ***

InterSystems has corrected a defect that can cause database degradation in extremely rare circumstances. Associated problems may include, but are not limited to, incorrect or missing application data and system hangs.

This defect affects:

• All versions of InterSystems IRIS and IRIS for Health
• Caché/Ensemble versions beginning with 2016.2.

Hello,

I have a record map and batch class being passed to an EnsLib.RecordMap.Operation.BatchFileOperation.

They are designated as INFORMATION.FPL.Record and INFORMATION.FPL.Header

After reaching the operation it errors out with this message : ERROR <Ens>ErrGeneral: Quitting with error on Message body 5@INFORMATION.FPL.Record / 54 because Status 'ERROR <EnsRecordMap>ErrNoBatchParent: Record with class 'INFORMATION.FPL.Record' and Id '54' doesn't belong to a batch' matched ReplyCodeAction 1 : 'E=F' resulting in Action code F

Some screen grabs are attached of my configuration.

I currently have a batch job that performs many functions. Two of them are below. I was wondering how this can be done in a custom class 

      mv $TEMPDIR/$FILE   $TEMPDIR/$FILEa"_$DATESTAMP.txt" 
     mv $TEMPDIR/$FILE1  $TEMPDIR/$FILE1a"_$DATESTAMP.txt" 
     mv $TEMPDIR/$FILE2  $TEMPDIR/$FILE2a"_$DATESTAMP.txt" 
     mv $TEMPDIR/$FILE3  $TEMPDIR/$FILE3a"_$DATESTAMP.txt"
     mv $TEMPDIR/$FILE4  $TEMPDIR/$FILE4a"_$DATESTAMP.txt" 
    #Gzip files 
    find $TEMPDIR -type f ! -iname '*gz' -exec gzip '{}' \; 

Thank you

Hello community,

I'm new to Objectscript and Intersystems development. I've read documentation and some examples and succeded to import my Java class  file into HealthShare using the Java Gateway Service. To import my class i tryed both methods (Wizard, or scripting) with success.

Everything works great, i see my imported class inside the namespace, and i can call the methods.

The problem begin when i try to update my .JAR file with new methods. I've insert new methods inside my Java Class (Public methods), and build a new Jar file to import into HealthShare.

Hi All,

I am planning on doing some maintenance in 2020, I was wondering if it is possible to run a query to get a log on when a DTL and/or Business Rules was called in HEALTHSHARE, the idea behind this is to do some cleaning and remove some clutter.

Your help or ideas are highly appreciated.

LW21

Hello All,

I am working on Files where I have to compare contents of two files and display result. e.g Suppose file1 contains data in Name and Roll form and file2 contains data in name and class form, so it should compare name from file1 and file2 and display those matching data(Name,Roll,class).

I have piece of idea about file system so any help would be appreciated. Thanks in advance.

Regards, Gunwant

Hi All,

    I am getting server application error in salesforce outbound message after upgrading the HealthShare  (from version 2015.1.0 to 2015.1.4). Please guide me to resolve this error.

Hi everyone,

I've encountered this annoying issue so many times before, if any one also encounter this issue, please share here if you have any solution.

So, I've been working on a web service project using HealthShare 2015. Sometimes I have to set a debug target to a csp file to debug it. If I pause the debug process about 3 minutes above or so (to examine an object, variable, etc..) the studio will hang.

After that, If I still try to click to the studio, the pop-up will appear to ask if I want to restart the

Is there anyway to improve the performance of the display of DeepSee dashboards?

It takes minutes to do the cell calculations of computing the axis members.

Any direction or help would be appreciated.

Thanks,
LG

Hi everyone,

I am currently sending an HTTP POST request to an EnsLib.HTTP.Service service (which has an EnsLib.HTTP.InboundAdapter associated).  In this request there is just one header: 

I wuold like to get it from my request . I have tried in several ways but I can't: 

set reqFrom = %request.GetCgiEnv("HTTP_requestFrom")

set reqFrom = pInput.Attributes("requestFrom")

and working with the imbound adapter but it didn't work.

What is the correct way to do that?

Thank you in advance for your help. 

Hello,

I have a little problem that appears to my newest program. One of the purpose of my program is to  transfer a file from a path to another one.

Another person/entity places the file into a specific file ( let's call it \\Server\) but the problem is that my service (a simple EnsLib.File.PassthroughService) takes it and places it directly into my other path. The pdf file is very big and it happens almost all the time that the size of the output file is not the same as in input and so is corrupted.

Off the back of the Interface Monitoring post I had created a class that queries the Ens.AlertRequest global and returns the entries between 6pm the night before and 6am in the morning.   

I tested this build in our T&D environments and the build worked very well.

However in our production environment the query is being truncated, by what I believe to be a timeout and I get a partial query output.

In the System>SQL pages my 12 hour query times out.

I compared the Global size by running a SELECT MAX(ID) query and got a return of 60,244,962 records.