New post

#HealthShare

30

InterSystems HealthShare is a healthcare informatics platform for hospitals, integrated delivery networks (IDNs) and regional and national health information exchanges (HIE). HealthShare includes health information exchange, data aggregation, workflow, text analysis, and analytics technology.

Learn more

Hi all,

I'm trying to output a XML file, mapped from a ORU_R01 2.3 HL7 message, with a file name based of fields in the source HL7 message in the following format,

source.{PIDgrpgrp(1).PIDgrp.PID:PatientIDInternalID(1).ID}_"-"_
source.{PIDgrpgrp(1).PIDgrp.PV1grp.PV1:VisitNumber.ID}_"-"_
source.{PIDgrpgrp(1).ORCgrp(1).OBR:ObservationDateTime.timeofanevent}

To give something like RXR0000000-000000123-20211125105415.xml as the output filename,

0 1
0 304

Hi Guys,

I'm getting the below TLS error in SSL_connect(), SSL_ERROR_SYSCALL, I've tried mulitple SSL/TLS configurations and still get the same error

ERROR #6085: Unable to write to socket with SSL/TLS configuration '**********', error reported 'SSL/TLS error in SSL_connect(), SSL_ERROR_SYSCALL: I/O error (104)'

0 1
0 171

Hi,

We have a system that gives an AE 'Error' response for warnings, that we want to transform to AA codes when returning the Application ACK.

MSH|^~\&|iCS|EHT|EPRO|R1K|20180511113136||ACK^A02|fbwZaoKW/USAdFI3IGLU|P|2.3|||AL|NE|
MSA|AE|fbwZaoKW/USAdFI3IGLU||||0^Nothing To Update^^W
ERR|||0^Nothing To Update|W|

Fortunately they include a warning code in MSA:6.4 and ERR:4

0 1
0 502

Hello. I'm wondering if anyone has experienced a similar error and if so, if they can point me in the right direction. I have a client who is logging into Epic and is using the Epic SAML to single sign on to our HealthShare system. We saw that it authenticated her through (from Epic to HealthShare) but when it attempted to open up the patient, we received the following Java error. When she clicks OK, it keeps coming back. Also, she is accessing Epic through a Citrix connection (if that helps with anything). Here is the error below.

Thanks!

0 1
0 722

Hi,

I would like to use EnsLib.HL7.Operation.HTTPOperation for sending HL7 messages via HTTP. It sends the Content-Type as "text/html"

I would like to change it to something else, say "text/plain". I cannot see a way to do it.

I have now written a custom Operation (based on EnsLib.HTTP.OutboundAdapter) and modifying the Content-Type while POSTing using SendFormDataArray(). It's bit frustrating to parse the response etc.,

I would rather prefer to use HTTPOperation of HL7. Can somebody help?

0 1
0 889

I've setup ODBC connection so I can access Cache data within SQL Server.

I want to be able to write SQL queries for internal monitoring purposes, similar to what's possible with SQL Server. Specifically I want to be able to check mirroring status (i.e. check which is the current primary mirror member), check the status of any Ensemble productions (started/stopped), check the status of business hosts etc. I want to do all of this from SQL Server to go with our other system monitoring solutions.

0 1
0 276

Throughout my years working within HealthShare\Ensemble, I have been able to mimic the Data Lookup page trimming it down to give our Ancillary areas access to modify their own data Lookup tables.

I am currently working on building a CSP application to allow certain users to update MS SQL tables by going through HealthShare. I thought all I had to was create the CSP pages and grant access. I am able to access it off my desktop, but when I have a user try to access the application, they get the sign in but then it doesn't do anything. So I think I might be missing something.

0 1
1 391
Question
· Oct 1, 2020
LDAPS - InterSystems cache

Hi All,

I hope all are good.

I would like to know that whether InterSystems will support LDAPS or not.
I have idea about LDAP but not about LDAPS.
Please suggest me If anyone has any documents or links.

Thanks and Regards,
Gunwant

0 1
0 229
Question
· Dec 2, 2021
Server Connections

I'm upgrading my laptop, and installed HealthShare 2020.2. I wanted to import my server connections from my previous laptop, so I exported the Registry Keys (Windows 10) Under Computer\HKEY_CURRENT_USER\SOFTWARE\InterSystems\Cache\Servers from the old machine. I then imported them into new laptop, but I still don't get the list of connections in my HealthShare Remote System Access list from the HS Cube in my system tray.

Does anyone have a solution for this? I thought this was more portable.

0 1
0 340

Hi Community,

There are two records of the same patient coming from the same source and when they are merged from the source they are not updating Health Information Exchange. I have blurred crucial information and the records are not falling off the worklist items after a merge from the source system.

The two records from the same source are in the middle section and the right section.

0 1
0 254

Is there a difference in outcome between the two screengrabs below?

In both cases, when certain conditions are met, a transformation is called and the output sent on to two targets. In the first case we surmise the transformation is called twice, and the output of the first run sent to the first target, the output of the second run to the second target. In the second case we surmise the transformation is called once, and the output duplicated and sent to the two targets.

0 1
0 139

Good day,

We recently had penetration testing conducted on our HealthShare clinical viewer and patient Index instances and below is the recommendation

1. Set a same-site cookie for identified CSPWSERVERID. Please advise where I can do this as I only saw this on web gateway settings and it has enable and disable options only.

0 1
0 156

We have multiple implementations spanning many namespaces and edges. I would like to see if I could identify a single place, perhaps on HSREGISTRY or HSBUS, that I could capture certain events like searches (from all customers) and record transfers (with requester and provider).

The goal is to have a dashboard that would show simple stats such as searches by participant, records shared by participant and records consumed by participant. These are the 3 most important.

I appreciated the feedback on the other question of "how" but now I'm hoping to find the "Where".

0 1
0 384

I have been tasked with setting up outage notifications to my group (for example, sending an email or automatically generating a problem incident when HealthShare/Ensemble experiences an outage), and determining outage statistics (for example, the time frame when HealthShare/Ensemble was unavailable). I admit I am having a hard time even defining what should be considered an “outage”.

0 1
0 276
Question
· Mar 4, 2019
Missing Mirrored Database

Hi guys

I've added a new mirrored failover member to an existing one.

They are both Arbiter controlled.

When I do Add database to mirror on the primary I'm always getting an error. Missing Mirrored database.

I followed everything in the documentation and always get the same error.

I've copied the CACHE.dat file after umounting the database on both servers. then mounted them.

Could you help me out?

Kind Regards

0 1
0 573

Hi -- at a customer site we have 8 Access Gateways, with a couple of different load balancers that decide which projects go to which subset of AGs.

We're about to go live with a project that uses a subscription, and we have that subscription pointing to one of the AGs. What if that AG goes down? The project is dead until the AG is back up. The subscription forces us to pick an AG that's registered in the Gateway Registry -- I don't see a way to get a cluster or load balancer address in there.

0 1
0 166
Question
· Sep 20, 2022
Read Only Service Registry

I'm trying to create a read-only role for most pages on the Management Portal. However, I cannot figure out resource permissions for the HealthShare tab or how to assign custom resource permissions, if any, to the registries. I would like for the role to include read-only access to the registries (service, consent, otherwise). How do I go about doing this?

0 1
0 175

Hi Community,

I hope this message finds you well. I am reaching out because I have encountered an issue with a new dimension I created, named "Region," and I could use your assistance in resolving it.

The problem is that when I open the cube analyzer, the "Region" dimension does not populate data as expected. Instead, it merely displays the text "sourceRegion," which I specified as an expression in the architect.

0 1
0 70