#HealthShare

24

InterSystems HealthShare is a healthcare informatics platform for hospitals, integrated delivery networks (IDNs) and regional and national health information exchanges (HIE). HealthShare includes health information exchange, data aggregation, workflow, text analysis, and analytics technology.

Learn more

Hello everyone,

I have a question and if you have some code, it would be lovely.

I had to create a connector which is biredictionnal. What does I mean by this?

I have to send ADT to an certain ip +port by TCP but I have to receive query A19 by this same ip+port.

Is it possible to create such a connector that can do both?

I read about pipe but i think it's too low-leveled .

Thanks,

Thomas

0 6
0 202

I have a Business Service that reads a file from a folder and sends it as a string to a Business Process. In the business process, I need to add a string to the end of the file string that is coming into the Business Process. I am trying to do this in object script in studio and I am struggling to figure out how to add the string to the end of the other string. I am still new to studio and object script I have been reading up on the documentation and I am not sure what is the best way to accomplish this.

0 6
0 342

Hi guys,

Does rebuilding of Data Quality Manager cubes affect patient index linkage definition data?

What I want to understand is, does DQM have any negative impact on the data each time you rebuild the cubes.

Additionally, if I make changes to the cube and rebuild it..will this have any impact on the original data?

0 6
0 422
Question
· Oct 7, 2022
Mirror Failover Settings

Hi All,

Our mirrored HealthShare environment has failed over a few times recently due to underlying infrastructure issues (that are being worked on and resolved).

In the HealthShare logs we are seeing:

10/06/22-00:54:35:925 (4736) 1 Journal Daemon has been inactive with I/O pending for 10 seconds:
gjrnoff=524741316,iocomplete=523852600,filecnt=1011,fail=0
10/06/22-00:54:55:086 (4736) 3 CP: Pausing users because Journal Daemon has not shown
signs of activity for 30 seconds. Users will resume if Journal Daemon is active again

My question is:

0 4
2 568

Hi Community,

Please give me an example on how to configure email alerting based on the rules and send out emails accrordingly.

As a message comes into the business service component I want to check specific fields and if a field for example active = true i want to send it to a different email and if active = false I want to send it to a different email as well.

Guide me on how to accomplish this requirement and let me know if InterSystems uses a default SMTP server or I must have that server in place.

Regards

0 8
0 303
Question
· Nov 30, 2023
Multitransformations of HL7

This question originally appeared in the comments of the post: Making use of Multiple Sub Transforms in a main map || HL7

I'm having a similar problem trying to get PRD(1) into PV1:ReferingDoctor and PRD(2) into PV1:ConsultingDoc

Running the subtransform will populate referring doctor for the first PRD, and then the second running will delete the PV1, make a new one with only the consulting doctor populated.

0 1
0 220

I have a question about using OnInit() within a Ens.BusinessOperation.

When you include OnInit(), does OnInit() only execute when you start a Business Operation? Or does it execute OnInit () every time you send a REST request to the operation. I am trying to pinpoint when the best time is to execute the POST command to get the Token

I am needing to get a Bearer Token from a REST POST call and return the Authorization key prior to making the rest of the REST calls to pull down data.

0 13
0 255

I was using VSCode to edit a DTL because it seemed easier to copy/paste code from parts of the DTL I was editing. I tried to add <sql> tag and code to call a SELECT statement, but when I compiled I got the following error...

ERROR <Ens>ErrInvalidDTL: Invalid DTL

> ERROR #5490: Error running generator for method 'GetSourceDocType:osuwmc.Epic.MFN.DTL.EpicMFN949002Normalization'

0 2
0 70

I am making a FHIR request against Epic, in when I get the Response back using "fromDao" I am extracting the stream into HS.FHIRModel.R4.Patient. However, the patient's name comes back as name within a list that references HS.FHIRModel.R4.SeqOfHumanName.

  • How do I extract the name from HS.FHIRModel.R4.SeqOfHumanName?
  • Do I have to then do another "fromDao" to pull the list into string format?
  • How do I navigate around the lists that are in a FHIRModel response, to extract the string values?
0 9
0 68

Is this available anywhere (for Health Connect)? I've found a few presentations but they are aimed at entry level.

We're looking at supporting more and more FHIR, REST plus OAuth interfaces in future. I've built some of this into older versions of HealthShare and Ensemble but it's desirable to move to supported versions.

We would be using Healthshare as a facade to other systems.

0 3
0 1.3K

I use the HS_IHE_ATNA_Repository.Aggregation table a lot. Someone just referred me to the HS_IHE_ATNA_Repository.Document table, which has an AggregationId column.

I assume that column references the ID column in the .Aggregation table. If so, does this mean that if the same document was requested 1,000 times that there will be 1,000 entries for it in the .Document table? This seems inefficient to me. Why not have one record in the document table and have a DocumentId column in the Aggregation table?

0 7
0 451
Question
· Apr 12, 2017
Message Profiling

Hi all,

I was wondering if InterSystems offers any message profiling capabilities. What I mean by "message profiling" is essentially stats or metrics gathered from a collection of data submissions of a particular type. For instance, average number of segments <XYZ> in a specific HL7 V2 message type. Or the number of sections found in a HL7 V3 CDA documents.

Curious if there is anything like this provided "out-of-box".

Thanks!

James

0 4
0 447

Hi,

Can you please tell us how to create xsl file for CCD to SDA conversion using XSLT.

What will be the prerequisites.

I have tried to create an xsl file for the given xml given belowusing XSLT transform Wizrad:

<?xml version="1.0" ?>
<s1 title="s1 title attr">
  <s2 title="s2 title attr">
    <s3 title="s3 title attr">Content</s3>
  </s2>
</s1>

using the stylesheet below:

0 2
0 1.2K

I am designing the software architecture for an Ensemble/Healthshare production to be deployed on Amazon AWS EC2 servers (2 mirrored m4.large - 4 vCPUs / 16 GiB RAM running RedHat Linux 3.10.0-327.el7.x86_64 and Healthshare for RHEL 64-bit 2016.2.1). It's a rather CPU-intensive production involving massive XSLT 2.0 transformations (massive both in terms of size and volume). I was wondering if anyone has experience configuring Ensemble productions on EC2 servers. My question or concern has to do with the following statement in the Ensemble documentation:

0 2
0 842

Can anyone tell me what controls the contents of the Facility column of the Encounters tab in the clinical viewer of Healthshare? I am ADT messages to populate the columns and have been unable to change the displayed value.

Might this be a TrakCare modification?


Thanks,

LG

0 2
0 421

My main goal is to be able to create reports and alerts in my SIEM based on what individual searched for and accessed what patient records, and when.

Does anybody have any experience with this? I've been ingesting audit logs in to Splunk but I'm having a hard time getting useful data.

0 1
0 432
Question
· Feb 1, 2019
Message Bank Usage

Hi

Has anyone implemented the message bank functionality in particular in the UK and if so what are your experiences of it in particular for custom messages? We are thinking of using it as our long term store and would like any feedback on it. We use a mix of REST web services, custom messages, HL7v2 and FHIR messaging within the Health area (NHS Trust to be exact).

I would also be interested in which version you implemented this upon.

Thanks

Ian

0 1
0 366

Hi,

While HL7 Errors ACKs come back in the soap response, the HL7v2 Error ACK message is not processed.

I used the SOAP Wizard to construct my classes, but the generated code doesn't handle the HL7v2 ACK.
Does health Connect have a class that handles this?

Failing an official solution should I go ahead and make make my own classes based on EnsLib.HL7.Operation.TCPOperation, but wrapping it with the generated SOAP handling code.

How have others dealt with this?

0 2
0 413