#Health Connect

Hello Community,

I'm unable see the FHIR SQL builder /csp/fhirsql and /csp/fhirsql/api/ui endpoints in web application to access the FHIR SQL builder. I'm using community edition 2024.1 and it contains the "FHIR SQL Builder".

Using the FHIR DEMO, I have pieced together how to make a FHIR Request using OAuth against an External FHIR Repository. When I execute the Patient search (HS.FHIRServer.Interop.Request), I get a HS.FHIRServer.Interop.Response that has a Quick Stream ID, which I then use to convert the Quick Stream to a JSON Dynamic Object. if I do a trace on the Raw JSON Object, I am able to pull out single elements, however I want to pull the raw JSON into a defined Class Structure. 

I tried using fromDao(dao As %DynamicAbstractObject) As <HS.FHIRModel.

We recently moved from using the Private Web Server, to using an Apache/Web Gateway setup and moved towards using the built in LDAP functionality within IRIS. Since then, we have 1 user that uses VSCode (/api/atelier) heavily that continues to have issues signing into IRIS through VS Code and the /api/atelier extension.

I am trying to troubleshoot two issues..

Hi,

I'm very new to InterSystems  Health Connect so may be doing something silly...

I'm trying to link to an Oracle DB view using the Link Table Wizard in the Management Portal. The wizard finds the view, but when I select it and click the 'next' button I get an error on the 'Select Columns' screen: 'ERROR #5534: Columns error' (and no columns show in the wizard). I've tried on several views and tables in the same DB but keep hitting the same error.

I have previously successfully mapped a view and table from the same DB and am not sure what I am doing differently. Any suggestions appreciated!

I have an HL7 message that contains NTE segment with line break inside.

when I try to transform it (with DTL) it stops reading the message after the line break inside the NTE because it treat that as "End of Message".

Is there a way to solve this in the DTL or I need to run a pre process on the HL7 message that identify the line break inside the NTE segments and replace it with an escape char?

HI,

I'm migration an existing integration to InterSystems.  The upstream (external) system calls a JSON web service hosted in the interface engine, which converts the JSON data received to a HL-7 messages to send to the downstream system. I'm looking for direction and example of how to do the equivalent in InterSystems, so the the upstream system only has to modify the URL of the web service they call.

I suppose in IS we'll need to create a business service that is a RESTful JSON web service? How to access the JSON data (parameters in the web service call) in the Transformation?

Thank you!

W

Up until recently, I have been toying around with REST/FHIR capabilities but only internally. Now I have a request to make REST API calls outside of our Network. 

I am using an RSA 4096 key, because Microsoft Active Directory Services which generates the signed certificate could not handle the Elliptical Key (ECC) when I put the request in.

• Others in the Healthcare industry, how have you handled this when there isn't an API manager involved?
• Do you connect directly through the Interoperability Engine using a TLS key?

IRIS for UNIX (Red Hat Enterprise Linux 8 for x86-64) 2024.1 (Build 267_2U) Tue Apr 30 2024 16:06:39 EDT [HealthConnect:7.2.0-1.r1]

I have a use case where Epic is sending an A60 Allergy transaction is set at the Patient level, but we have a system called VIBE which needs the ADT at an Encounter level instead. Currently we store ADT information in a MS SQL database for years, and we are querying it to get the latest Account Number to insert into the ADT^A60 for VIBE.

This MS SQL Visit Database was built over 20 years ago and is quite cumbersome to keep maintaining.

what is the purpose of default settings in System management portal?

How to increase the performance of the production when getting multiple messages from various Healthcare organizations

We have an operation that sends a Rest request to an external endpoint. The request includes the secret, which shows up in the Message Viewer. While access to the Production is restricted to only those who need it, we have been asked to remove it from the Message Traces. Is there a way to hide certain information on the Message Viewer ?

Thanks for reading

I have an API that does not have all the data.  Like it is truncated. Magic number of characters seems to be 163,280

I do an <assign> 

context.RawBundle=##class(%DynamicObject).%FromJSON(context.FHIRResponse.Body)

The error does not happen when the response is < 163,280 chars.  And when < 163,280 chars, it is a complete FHIR Bundle.  Have anyone experienced this?  If so, what is the resolution?

I created a FHIR Client to execute a GET response from an external FHIR server. I set everything up according to this post: https://community.intersystems.com/post/create-fhir-rest-client#comment…

I was able to send a GET request and got a response of type HS.FHIRServer.Interop.Response.

But in the visual trace, I do not see the actual json response payload.  I opened the response object in terminal and saw it has a QuickStreamId, which I used with the HS.SDA3.QuickStream class to open the quickstream object. But how do I get the payload from this quickstream object? 

For some time I have been planning to do some type of proof of concept with the Workflow functionality, which, like so many other functionalities present in IRIS, tends to go quite unnoticed by our clients (and for which I say mea culpa). That's why I decided a few days ago to develop an example of how to configure and exploit this functionality by connecting it with a user interface developed in Angular.

To avoid a very long article and make it more accessible, I am going to divide it into 3.

Finally and with a little delay, we conclude this series of articles about our Workflow Engine by showing an example of the connection that we could make from a mobile application.

In the previous article we showed the example that we were going to discuss, an application that allows detailed control of a chronic pathology such as hypertension for both the patient and their associated doctor.

I am attempting to make a FHIR call against the Epic Repository through Intersystems. I have setup a Service client per Create FHIR REST Client | InterSystems Developer Community | Business

but I have set it up using OAuth and HTTPS.

I have verified that the OAuth works by executing it manually via a Terminal to verify I get a response. Of course, when I do it is writing to the ISCLOG

I am trying to now test making the FHIR call by initiating the test of HS.FHIRServer.Interop.HTTPOperation, however I keep getting mixed results with first a 404 not found error, and now a 401 unauthorized error.

Hi

I've started seeing the following alerts in the message log of my Primary HealthConnect server

05/23/24-11:20:09:718 (6732) 2 [Utility.Event] Process 7248 generated 3 alerts in 10 seconds. Suspending alert notifications for this process.

Process 6732 corresponds to 

EXECUTION DETAILS

Process State: RUNW

In Transaction:

No

Last Global Reference:

||ISC.BackupDBArray("USER")

Routine:

SYS.VSSWriter.1

Location:

VSS Writer

Source Location:

+33^SYS.VSSWriter.

Hi Community,

Play the new video on InterSystems Developers YouTube:

⏯ Clinica Universidad de Navarra - Low on Budget High on Innovation @ Global Summit 2023

Hi All,
We invite you to join our next Meetup in Boston on June 25 5:30-7:30 pm.
>> RSVP here <<

Hi,

I use the data functions but don't know what they all do.  Is there a dictionary that explains what each function does?

Thanks,

Lai Pham

I don't have a current project where I am needing to create a new operation that uses SOAP at the moment but as someone who still has some SOAP connections in her Production, I was curious if VSCode had an equivalent to the SOAP Wizard that helped create all of the SOAP classes needed based on the provided WSDL? Does anyone know? Or has this become a manual process? 
Thanks in advance for help curbing my curiosity! 

InterSystems is pleased to announce the general availability of:

• InterSystems IRIS Data Platform 2024.1.0.267.2
• InterSystems IRIS for Health 2024.1.0.267.2
• HealthShare Health Connect 2024.1.0.267.2

This release adds support for the Ubuntu 24.04 operating system.  Ubuntu 24.04 includes Linux kernel 6.8, security improvements, along with installer and user interface improvements.  InterSystems IRIS IntegratedML is not yet available on Ubuntu 24.04.

Additionally, this release addresses two defects for all platforms:

• A fix for some SQL queries using “NOT %INLIST” returning incorrect results.

Hi. In a project I'm involved in I need to connect to a MongoDB database, read some data and store it in some internal table. 

I'm wondering what's the best way to connect to MongoDB, as it seams to me there's no native Intersystems adapter.

Did anyone have handled such a scenario?

Thank you. Best regards 

Davide Cecchetto

Hi 

I'm new to DTL. I'm playing with Code action and run into some syntax error with a simple assignment statement. Please see the screenshot below.

Can someone direct me to some sample code in a Code action for processing HL-7 messages please? Thanks

Hi all, I need an advice (or a guide):

In an EC2 environment running RHEL, which memory management model makes sense to use. Standard Huge Pages or Transparent Huge Pages?

We are experimenting with IIS, as the PWS will be gone in newer versions.

The code which is executed, takes 15ms to run. If we execute it through PWS (REST), there is some overhead and the total execution time is 40ms, which is acceptable. However, if we go through IIS, it takes 150ms or sometimes even more.

Both PWS and IIS are running on the same server as IRIS in this case. No optimisations have been done on IIS.

Any suggestions on where to look/what to optimize on IIS?

I am trying to create my first call to our Epic FHIR Repository from Health Connect using Samples-FHIRStarter now that I have OAuth2.0 connection tested/working with our Epic Interconnect URL.

When I take a patient example from our Epic environment and test it through Data.BPL.PatientRecordCollector within the Namespace, I keep getting a 404 - File or directory not found 

as it tells me it cannot find the patient. So, I know the connection is being established, I just can't see what is being sent to Epic to see if I could test it through Postman.

I am attempting to configure an inbound service that utilizes the EnsLib.SOAP.GenericService class. This service receives HL7-v3 content wrapped in SOAP requests. Despite reading the documentation on configuring SOAP services, I am still confused.

In my current configuration item "Fr_Centrak_RTLS", I have ‘Enable Standard Requests’ checked, ‘Pool Size’ set to 0, and the port is unspecified.

I have also configured a web application with the following details:

My challenge is determining the correct URL address for sending SOAP traffic to this service.

I have an angular UI communicating with a iris rest api. Now I need to authenticate (to federated) before accessing the UI, and for a better solution  as the users are using the healthshare clinical viewer 2023, find a way to use the clinical viewer authentication / user to go to the UI.

The angular way would be to do an angular guard and have a function 'am I authenticate to federated', but I never found a function like this and how to get my username.

Hi, please let me know where i find details on Objectscript internal implementation - is it an interpreted language ? - compiled into binary code (how - which compiler/toolchain ?) ? - support of LLVM ? thanks a lot Frank