Hi All! For those of you who are users of our cloud services, you may have been introduced to Health Connect Cloud. One topic within that cloud service that can be a little tricky is understanding how GitLab and the source control workflow fit seamlessly into your integration workflow in Health Connect Cloud. I recently presented a lightboard video explaining how this works, including the slightly different workflows for building interfaces via code versus building via the Management Portal UI. If you use Health Connect Cloud, let me know if this is helpful or if you have questions!

https://www.youtube.com/embed/IN83cGGx-N8?si=WAyFtWFpZxzwnofA
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

5 0
0 176

I recently started work on trying to Tighten Security in our Development Instance of IRIS that is running based on recommendations from our Audit as you might of seen from my other posts. I am currently trying to get into the Private Web Gateway Manager within IRIS as CSPSystem, but when I attempt to sign in nothing happens.

I went through and reset the password in the CSP.ini and within IRIS for CSPSystem. I made sure it had the new GatewayRole per suggested

0 2
0 475

I am trying to lock down security within our Development environment per requirements from a Security Audit that was done earlier this year. I need to try to limit access at a public level, access to cache users, and exposure.

I installed IRIS with the Lockdown method, and have configured my web applications, services, resources, etc.

When I go into my namespace, I am constantly presented with the following error when I try to start or stop an Object...

0 3
0 234

We currently have a couple of Shell scripts we have written to EnableConfigItem from a Unix (Red Hat) command line, so we can control when a Service/Operation is running via the cron in Unix. We do this by calling

:>iris session xxxxx

using _system user.

During our Security audit it was mentioned that we need to lock down some of the cache users.

0 3
0 295

Hi All! If you have looked into Health Connect Cloud at all, you may know that the cloud-native environment presents a few differences from traditional deployments of InterSystems integrations. If you've taken a classroom course at InterSystems, you may have used "in" and "out" folders in productions to simulate receiving and outputting HL7 messages.

2 0
0 176

Hey Community,

Enjoy watching the new video on InterSystems Developers YouTube:

Why Use Multiple Namespaces in Health Connect

https://www.youtube.com/embed/0dUMcU83guQ
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

0 0
0 207

My original ZAUTHENTICATE.mac to use Delegated sign on did not include GetCredentials(), however I am being told it probably should have it so I am eliminate an error I am seeing when trying to troubleshoot the ZAUTHENTICATION. I am trying to add the GetCredentials() from the documentation to the existing ZAUTHENTICATE.mac but I am getting an error

0 7
0 433

Hi Community,

We're pleased to invite you to the upcoming webinar in Hebrew:

👉 Leveraging Embedded Python in Hebrew 👈

🗓️ Date & time: September 12th, 3:00 PM IDT

https://www.youtube.com/embed/shr7yMRj83Q?si=EGmYxBk0v-2j6j6c
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

4 1
0 460

Still working on my first External REST API call, and I am struggling to find the exact answer I am looking for... I get a JSON response from my API call but I am not quite sure how to dynamically get the JSON response into the Ens.Response Object with its lists of Arrays that I have defined.

set tSC = ..Adapter.SendFormDataArray(.tHTTPResposne,"POST",tHTTPRequest,,,tURL)

0 10
0 591
Question
· Aug 25, 2023
Reply Code Actions Question

Hi Everyone

I'm just wondering if anyone might have a list (or the experience to make a list) of the most often used / useful Reply Code Actions?

In the Help section of Health Connect Management Portal, it lists

'E=F' and ':?R=RF,:?E=S,:~=S,:?A=C,:*=S,:I?=W,:T?=C'

as the default options, though I'm curious if anyone else has found other codes or strings of codes useful?

Thanks in advance.

Best wishes

Robert

0 3
0 548
Question
· Sep 7, 2023
Question about ISCAgent Config

We are noticing some issues with the communication between our Arbiter and our servers. Looking at the following documentation to limit connections, and logging...https://docs.intersystems.com/irislatest/csp/docbook/DocBook.UI.Page.cls?KEY=GHA_mirror_set_config#GHA_mirror_set_agent_port

if I am configuring the ISCAgent on the arbiter, would we set

1 3
0 378

Hey Community,

Enjoy watching the new video on InterSystems Developers YouTube:

How to Configure Firewall Rules in Health Connect Cloud

https://www.youtube.com/embed/t9nn5ClHt9I
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

1 0
0 296

Hello!

I'm currently trying to setup a SFTP Ensemble production to handle all of my SFTP transactions. It's been going well, but I'm currently running into an issue where it is saying it is unable to exchange encryption keys. Error Below:

Unable to exchange encryption keys [80101005] at Session.cpp:238,0' matched ReplyCodeAction 1 : 'E=R' resulting in Action code R

Any advice on getting around this would be appreciated.

0 3
0 410

Hi All! For those of you who are early adopters of Health Connect Cloud, you might be interested in our latest video -- a tutorial on how to create firewall rules, as well as obtain important network addresses, in your Health Connect Cloud deployments. Let us know if you have questions or interest in learning more about Health Connect Cloud.

https://www.youtube.com/embed/upIf4LHx540
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

0 0
0 112

Hello,

I have a EnsLib.HL7.Operation.FTPOperation that uses SFTP protocol and public/private key to connect to an external vendor moveitcloud.

Issue: The vendor is planning to enable Multi Factor Authentication for this file transfer account.

Question: Have you configured a SFTP operation to use Multi factor Authentication? If not, is there another way?

Thank you,

0 1
0 375

Hi All,

If I remember it correctly there is a functionality in IRIS to make this possible.

I've got two incoming Business Services of files from different sources.

BS1: An Ens.StreamContainer with some info and metadata which point to a specific file. Ens.StreamContainer will be send to a BP.

BS2: The files where the metadata points to. It's in the Ens.StreamContainer

But dependent on the flow the file could be later available on BS2. So I want the BPL to wait for the file to arrive at BS2.

0 4
0 214

Hi All,

We're doing our first babysteps with embedded Python and IRIS with an interoperability solution. We want to convert a CSV file to an Excel xlt file.

As service we've got a EnsLib.File.PassthroughService which picks up a csv file

As operation we've got a EnsLib.File.PassthroughOperation which writes the Excel file.

In the middle:

We've created an Business Process with an %Stream.GlobalCharacter in the Request and a %Stream.GlobalCharacter in the Response.

1 3
0 442

Recently I started moving some of our JDBC Gateway configurations over to using the Microsoft JDBC Gateway driver instead of using the jTDS open source driver. I have noticed since then that those Objects that are using Microsoft JDBC Driver are throwing a lot more errors than the jTDS driver ever did, which I can understand however I am puzzled that I keep running into an issue with the Java Gateway Service within the Interoperability engine.

0 1
0 374

The extended maintenance releases of InterSystems IRIS, InterSystems IRIS for Health, and HealthShare Health Connect 2023.1.1 are now available. This release provides bug fixes for the previous 2023.1.0 releases.

You can find the detailed change lists / upgrade checklists on these pages:

4 0
1 374

Hi all

I need to do hardware maintenance on a physical HealthConnect server which forms one half of a mirrored pair, and It will require multiple restarts.

So, I will need to prevent any HealthConnect services from restarting until all maintenance is completed. Is this just a case of disabling the service "HealthConnect Controller for <SERVERNAME>", or is there anything else I need to be aware of?

Andy

0 2
0 195