#Ensemble

Dear All,

I would like to block ADT_A18 and ADT_A47 HL7 2.3 messages with an empty MRG:1 field.

This is to prevent my current HL7 ADT router (Business process) sending blank Merges downstream.

I've attempted to create a business rule where this would return out the business role process.  However the messages still loop though the other rules.

Any advice would be great.

Kind Regards

Stuart

FYI, on the Field Test page, the links highlighted below are currently broken:

UPDATE: this is now working again.

Hello,

I have been struggling and could use some help as I think I'm burnt.  I am trying to change a Textual 2.5.1 OBX;5 with multiple iterations to a simple non-iterating outbound result.  I have played around with $piece but can't seem to get it to work.  The outcome I would like is for OBX;5 to look like this: |Positive| and currently it looks like this: |Positive~_~_~_~_~|.  Any suggestions would be appreciated.

Hi,

I am trying to create a new dashboard using zen page for different namespaces. Could someone give me a sample code on how I can start designing the page for different namespaces in a single zen page/zen application.

Hi,

We have a method written in cache studio that converts XML file to JSON and JSON file to XML,  Can we use this method in ensemble production.

Hello community,

I would like to know answer to the question: What would be an optimal way to connect an Ensemble and a pure Caché server? Optimally in such a way for the Caché system to be able to fire Ensemble processes and the Ensemble server to call Caché server functions.

InterSystems is pleased to announce the availability of the Caché and Ensemble 2016.1.4 maintenance releases.

For a complete list of the corrections, please review the release notes.

Caché and Ensemble 2016.1.4 are available on the same platforms as 2016.1.3.  For complete platform details, please refer to the Supported Platforms document.

Availability of HealthShare Health Connect will be announced separately.

The version number of the kits for these releases is 2016.1.4.104.0

Class documentation:

class %Exception.General extends AbstractException

Simple exception class that can be throw in user code. You can throw this with code similar to:

	Throw ##class(%Exception.General).%New(name,numericCode,location,data)

The name is a string name for the exception, the numericCode is a numeric error code. If the location field is blank and $$$envCallerErrorInfo is defined then the system will attempt to fill in this location where the exception was thrown from automatically. You can pass additional exception data in the data argument.

Does any boding knows how to set the

Is there a way to use a HL7 field value as part of the File Naming in the Business Operation FileOperation class.  I know we can do this in a custom class, but I was wondering if it could be done the default FileOperation class?

Example:

MSH-4 contains the value 12345

We would like to name the file 12345_YYYYMMDDHHMMSS.HL7

MSH.4 value here_%Y%m%d%H%M%S.HL7

It may not be possible, but I just want to see if anyone has any information

Thanks,

Kevin Brown

We are in the process of using Ensemble for HL7 translations, and wanted to know is it better to use it on Linux Server or Windows Server? We are mostly a Windows shop but just wanted to make sure there is nothing we will be missing out using the Windows application.

I'm using %SOAP.WebRequest to send SOAP requests:

1. Populate %SOAP.WebRequest object (by setting Request and HeadersOut properties)
2. Call SendSOAPBody method to send request

Currently the XML I send looks like this:

<?xml version="1.0" encoding="UTF-8" ?>
<SOAP-ENV:Envelope xmlns:SOAP-ENV='http://schemas.xmlsoap.org/soap/envelope/'>
  <SOAP-ENV:Header>
<SomeCustomHeader/>  </SOAP-ENV:Header>
  <SOAP-ENV:Body><SomeCustomBody/></SOAP-ENV:Body>
</SOAP-ENV:Envelope>

However, I want XML to be generated differently:

• No new lines
• No whitespaces between <SomeCustomHeader/> and </SOAP-ENV:Header>

How can I tweak XML generation to achieve that?

I have a case where I am creating a PDF file from an Encoded String, and I need to transfer this file over to another server. I was wondering since this is PDF file if I could just invoke the FTP.OutboundAdapter within my Object script that is creating the PDF from the encoded string. Is this possible? Does anyone have an examples of using EnsLib.FTP.OutboundAdpater within their Object Script?

Thanks

Scott Roth

Integration - Interfaces

The Ohio State University Wexner Medical Center

Dear All,

I’m having trouble creating the following business service.  It’s intention is to pick up an CSV via FTP and pass it to a Business process that transforms it to a HL7 message.

I have created a record map for the CSV file, which I am trying to call in the business service and parse it into a new message class, which can be transformed in the business process.

Please could you advise:

Business Service:

/// Collects CSV from Epic FTP, looking for ENH patient
/// antiobitic sensitivities to be passed on to ENH Infection control
/// Patch 176
Class CUH.Serv.EpicFTPFilePickup Extends

Hi,

I've built a custom HL7 searchtable, but wish to remove some of the items.

I've removed the items I no longer wish to index recompiled the custom searchtable, however the previous searchtable values are available when searching messages in the namespace.

Do I need to rebuild the index for this searchtable to purge searching the old values?

I have stop and started the production.

Regards

Stuart

Hi,

Can you please help me to know if there is any performance testing tool for Ensemble production.

Requirement is  : I need to track the time consumed for conversion of message in BP , from the time the service picked the file from "In " folder and gives the response output file in "Out" folder.

Thanks ,

Shobha

We have a service that sends XML message. During unit test, I tried to resend the message with following scenario:

(1) If I leave the content blank, the original message will be resent in the ContentStream;

(2) If I post a new XML message, the new XML will be sent in the Content, the original message will be resent in the ContentStream;

(3) If I post a new XML message with very big length, it will be converted to 5@%CSP.CharacterStream, and following kind of error will be thrown:

ERROR #6901: XSLT XML Transformer Error: SAXParseException: invalid document structure (Occurred in an unknown entity,

Is there anyway I an do a Constraint base on the file name? I only see things like source and document name and wanted to do routing base on file name?

 I ike to create schema independent DTL to add FTS segment  to the end of a message. The problem that I see if do I need to loop each segment  to find the last segment ? Or is there a better way to do this?

ClassMethod Transform(source As %RegisteredObject, target As %RegisteredObject) As %Status
{

     set target=source.%ConstructClone(1)
     set FTSseg= "FTS||End Of File|"

ERROR
    quit sc
}
 

Is it possible to use an intersect lookup table on a repeating field in a routing rule from management portal.

Using the Data Transformation Builder I see the action if but in my scenario a case statement  would be better. Is there anyway to do a case statement? This way I dont need to build a long if else logic.

Hi All,

I am trying to pass a http request through ensemble production and fetch response. 

Could you please advice us the steps to achieve this. 

Thanks in advance,

Arpitha R

Hi,

We are trying  to feed in HTTP request & get HTTP Response in ensemble production.

From the below link  we got the code for HTTP Request/Response Example. while executing the code we are getting following error: "ERROR <Ens>ErrFailureTimeout: FailureTimeout of 30 seconds exceeded in Test.HTTP.Operation; status from last attempt was ERROR #5922: Timed out waiting for response​"

URL : https://sites.google.com/site/intersystemsensemble/code-collection/exam…

Could you please help us in this regard. 

Could you please guide us in Creating a new Ensemble Production

Hi,

Is JMETER compatable with Ensemble production.

Hi,

I am trying to generate a custom error-code using the following code

Class ISG.CommonBilling.Service.Test1 Extends EnsLib.HL7.Operation.TCPOperation
{
	ClassMethod khalid() As %Status
	{
		Set tSC=$$$ERROR("10001","I am here")
		write $$$GETERRORCODE(tSC)_$char(13,10)
		write $SYSTEM.Status.GetErrorText(tSC)
	}
}

And here is the output:

KINDRED>do ##class(ISG.CommonBilling.Service.Test1).khalid()
10001
ERROR #10001: Unknown status code: 10001 (I am here)

QUERY: Is there any way I can remove the part "Unknown status code: 10001 (...)" in the error-text?

Thanks in advance, Khalid

Hi, Community!

Please find the Developer Community video of the week: Human Decision as a Part of Workflow.

This video is a session from Global Summit 2016 which describes:

• The needs of human decision in workflow
• Human workflow and InterSystems Ensemble
• Ensemble Workflow API

Enjoy and stay tuned with Developer Community YouTube Channel.

Hello,

There is a programatic way to Export/Import the Ensemble System Default Settings?

I know you can use the Production Export Screen and add the "Deployable settings" but I am looking for something more quick and flexible

Thanks

Hi,

I am facing an issue after upgrading from Ensemble version 2015.1 to 2017.1. On 2015.1, I was testing a Rest operation using a https mock-server. But now on 2017.1, the same Rest operation throws me the following exception on testing...

Hi everyone,

i have a problem with the "ExecuteUpdateParmArray()" methode from the "EnsLib.SQL.OutboundAdapter" adaptater when i try to update a sql server 2008 table with JDBC connection.

..Adapter.ExecuteUpdateParmArray(.nRows,sqlUpdate,.param)

return to me the following error:

- "ERROR #5023: Remote Gateway Error: JDBC Gateway execUpdate(0) error -1: no value specified for parameter 1."

the sqlUpdate is like "update table SET column1 = ?,column2 = ?,column3 = ? where id = 1"

i built my param like this :

s param(1) = 'x'
s param(2) = 'y'
s param(3) = 'z'
s param = 3

i have no proleme for using

..A

Hi,

I am trying to input JSON file in ensemble production and get XML output file is there any way to achieve this or any cache program to do so?

InterSystems is pleased to announce the availability of the following maintenance releases:

• Caché and Ensemble 2017.1.1
• HealthShare Health Connect v15.021 on core technology 2017.1.1

Caché and Ensemble are available on the same platforms as 2017.1.0, except as noted below

• The full list of corrections can be found in the release notes.
• The version number of the kits for these releases is 2017.1.1.111.0
• Oracle Solaris 10, 11 for SPARC-64 and Oracle Solaris 10, 11 for x86-64 are not yet approved.

HealthShare HealthConnect v15.021 on core technology 2017.1.1.111.0

• Contains the HealthShare