As IRIS was announced yesterday by Paul Grabscheid I would be highly interested to get in touch with it.

- How can we get qualified for a closer view ?
- Where can we get some (preliminary) description + documentation.
- Is there any FT available ?

I'm especially interested in the areas around included/embedded/attached JVM and SPARK .

11 3
0 655

Hi,

is there a way to copy namespace mappings from another namespace to a new namespace programmatically with a command?

When using management portal there is an option to choose an existing namespace to copy the mappings from, I'm basically looking for the equivalent from command line / COS.

Thanks

Martin

0 4
0 655

HI,

Has anyone implemented the NHS Care Connect profile in HealthShare and if so could you share the steps you took?

I am not looking to integrate it into the SDA model, Just looking having the classes within HealthShare and then applying a DTL to convert to HL7 2.x

I was hoping i could just down load the profiles from git hub and import into Studio but it appears I need the XSD to do this, which are not available.

Cheers,

Jason

0 4
0 655

We have an web application accessed using https, that uses CSP technology with frames.

The initial 'login' is via a single CSP page, which then redirects to another CSP page which creates the frames (4 in all) and loads a CSP page in each of those. For the most part the frames load without error, but sometimes when logging in and sometimes while using the system ' 5916 Illegal CSP Request ' errors occur.

I say 'login' in inverted commas as a Cache login is not performed just an application login, I don't know if that's relevant so thought I'd mention it.

0 2
0 654

We are finally planning to migrate some ancient Caché applications that are run on Caché 5.0.21 to a new server with Caché 2016.2.0 or so.

I wonder if we could use Shadowing between those to keep the data on the new server up to date?

We would copy the Caché backup from the old environment to the new and do a RESTORE there and then start shadowing.

I know than 5.0.21 is no more officially supported by ISC.

0 5
0 654

I have a class thus:-

Class RMH.ClinDoc.Response.GetEPRDisplayResponse Extends Ens.Response [ProcedureBlock]

{

Property GetEPRDisplayResult As %XML.String;

}

The property GetEPRDisplayResult contains html content.

When I write out the property in a terminal, all the html special character content is encoded e.g. '<' is &lt; '>' is &gt ; etc....

I want to display this html in a browser and have it render as normal.

So my question is how to I store html content in a cache object such that it renders correctly in a browser?

0 3
0 654

Hi Guys

how do I deal with single Quote inside string in an SQL query?

currently this type of query is failing with an error asking me for a closing quote :

Select * from cnd.Facilities where name like ''%Grill's BBQ%'

Thanks

0 5
0 654

Hey ISC Community!

For a small automation feature I would like to login to the IRIS shell non-interactively, skipping the whole username and password prompts, providing the credentials through other means. Something in the fashion of "iris session <instance-name> --user myuser --pass mypass" would be great, but the session tool itself doesn't seem to be capable of doing this.

3 6
0 653

Let's imagine you have only SQL. You need some table where you should increment value in some property when you update this line.

We have the table

CREATE TABLE "test" (
  "identifier"   VARCHAR(200) NOT NULL,
  "value"        INTEGER,
  PRIMARY KEY ("identifier")
)

1 6
0 653

Hello everyone,

I have a doubt, its possible to use interface like C# using COS?

Remember, interface is different from Abstract Class, because a abstract class can implement code in the method, so I don't want this, I want only define the methods from Class, not allowing implement code.

2 5
0 653

I'm looking for a SQL function equivalent for SQL server STRING_SPLIT. I have records like this:

join_to_tx_history (key), ss_note_multi_dict_1_value (varchar)

64559.001 Assistant Principal, Case Worker, Client, Dad, Daughter, Mentor, Mom, Other, Principal, Psychiatrist, School Counselor, Teacher

and I like the field ss_note_multi_dict_1_value split to rows for each comma delimited value. So I can get this:

0 2
0 652

Is there a way to set null in dynamic object without using %Set methods?

I have this method and I need to set NULL as, well, null and not string.

ClassMethod node(name) [ CodeMode = expression ]
{
{
    "name":(name),
    "content":($case(##class(%Dictionary.ClassDefinition).%ExistsId(name), $$$YES:"mycontent", $$$NO:"NULL"))
}
}
0 3
0 652

I've noticed that Management portal somehow manages to allow a single user to be in different namespaces in different tabs in the same application (i.e. Management Portal). I've looked at my Processes, however, and see that all of my processes using MgmtPortal think I'm in %SYS, even though 2 of them are looking at globals in two different namespaces; NamespaceA and NamespaceB.

I can even fool MgmtPortal because the first time I try to look at a global in NamespaceA it thinks I'm in %SYS! After a refresh, however, I can see the global in NamespaceA.

0 8
0 652

Hi

Quick question... Is it possible to save a class in another namespace. If you're saving a global you can just use an extended reference, but is it possible to achieve the same when saving a class object? Obviously the class will be defined in the other namespaces too.

I want to do it from an Ensemble SOAP Service. I guess you could switch namespaces, but I was a bit worried about doing that from Ensemble process.

thanks

1 7
0 651

Should be easy, right? My DEV environment is working just find and sending out alerts via email, however my TST and PRD environments are showing "ERROR #6070: SMTP Send failed" on the Ens.Alert email operation. Same configuration settings on the operation, same SMTP server being addressed (I confirmed that I can ping the mail server from DEV, TST, and PRD boxes) and same port#. I turned on "Log Trace Events" but don't see anything additional in the logs. Am I missing something?

Let me know if you have any thoughts.

Thanks,

Hunter

0 1
0 651

Hello guys,

I'm working on a Healthshare project . I am using a patient message Flow for Inbound SDA Data in an Edge Gateway.

The patients are created , i manage to found them on the Patient search screen. However , when i request clinical data display on the clinical viewer, i do find the patient but no clinical data is visible on the clinical viewer, eventhough the SDA object exists on HS.Registry.Patient table .

So i checked the data flow , and i found that there is an error when the Edge Gateway Receives a Clinical Data Request :

0 2
0 650

Hello

I recently spent some time with Atelier, and tried to use it's inherited (from Eclipse) XSL transformation capabilities.

I have installed Exlipse XML Editor and Tools and Orangevolt XSLT - as it provides Saxon XSLT processor.

I have XSLT 2.0 transformation defined, that uses isc:evaluate() callback function to perform some server side code.

And here is my problem: when I try to run XSL transformation of a file in my project, then as soon as the processor hits isc:evaluate() it fails.

0 5
0 650

I'm trying to create asynchronous Ensemble service/operation pair for SOAP passthrough.

General configuration:

  • Ensemble Service receives a message and immediately returns an answer to a caller (message received or some error)
  • Ensemble Service asynchronously calls Business Operation
  • Business Operation does guaranteed message delivery, etc.

Is it a viable approach?

Any tips? Ideas? Caveats? Code?

Seems like I can sublass EnsLib.SOAP.GenericService and change Sync to ASync (and provide a default reply immediately).

0 3
0 650

I came across How to import a tab separated text file into a SQL table programmatically?, which appears to indicate that I can pass the filename and all records will be imported. However, when I put use the Import method only a single record gets imported. However, all records are imported if I use the management console to import the file by selecting it and choosing the options.

Has anyone ran into this in the past?

0 3
0 650

Hi!

I am making a request to an API and JSON is coming as follows:

SET %httprequest = ##class(%Net.HttpRequest).%New()
DO %httprequest.Get(URL)
SET %responseBody = %httprequest.HttpResponse.Data.Read()

W %responseBody
{produto:"CHP0001",Local:{IDMV: "000000001",LOTE: "",DtFabric: "null",DtVenc: "null",Atributo06: "0000000002",Atributo07: "",QtdeDisp: "10.00000",QtdeAloc: "0.00000",QtdeSep: "0.00000",QtdeTotal: "10.00000",Status: "OK",Motivo: ""}}

2 9
0 650
Question
· Oct 27, 2017
Recordmap within a BPL

I have a text file that is fixed width delimited and am using a BPL to process this file, ultimately performing a transform from the text file to an HL7 message. I created a DTL, mapping from the recordmap to the HL7. In my BPL, I am performing some loops and other logic (that all is working). My issue is what to do when I perform the Transform.

0 1
0 650