Hello!,

I was wondering if some one have an example code of the MessageBank Helper Class? , im currently using the MessageBank ok to store all message/events, but i need to be able to search for messages using the bodyclass properties. 

I've read that using MessageBank Helper Class you can do that, but i just cant find anything , documentation only says use the OnBankMSG() method and thats it.

Atelier is not translating the indentation spaces used to format XDATA sections in Cache Studio. Lack of these spaces makes the XDATA difficult to read. The styling (coloring) of the code is working just fine. Also, it appears that other class code indentation works fine.

Is anyone else seeing this issue? Has there been any discussion when this issue might be addressed by InterSystems? How shall I get some attention to this issue?

I have a CSP REST web application where I'm using delegated authentication via basic authentication in the REST calls. When I do a call to the web app with correct user credentials, I get a  CSPSESSIONID cookie back representing the CSP session, which has started for the user I'm logged in with.

And when I want to log out/end the CSP session with the "CacheLogout=end" query parameter, I get a 401 Unauthorized code back. But the csp session itself does get terminated, which means the logout call was successful.

Is there a way to have it return a 200 OK status code?

Often InterSystems technology architect team is asked about recommended storage arrays or storage technologies.  To provide this information to a wider audience as reference, a new series is started to provide some of the results we have encountered with various storage technologies.  As a general recommendation, all-flash storage is highly recommended with all InterSystems products to provide the lowest latency and predictable IOPS capabilities.

The first in the series was the most recently tested Netapp AFF A300 storage array.  This is middle-tier type storage array with several higher models above it.  This specific A300 model is capable of supporting a minimal configuration of only a few drives to hundreds of drives per HA pair, and also capable of being clustered with multiple controller pairs for tens of PB's of disk capacity and hundreds of thousands of IOPS or higher. 

Hi I am getting below error in xDBC error log

<-400>:<Fatal error occurred> <READ>Dispatch+14^%SYS.BINDSRV ServerLoop

When I check the detail of error I am getting below information. Please suggest as our schedule job getting failed due to same error.

Namespace: ******* Process: 5569 Error: 2018-07-10 06:27:17 [SQLCODE: <-400>:<Fatal error occurred>] [Cache Error: <<READ>Dispatch+14^%SYS.BINDSRV>] [Location: <ServerLoop>] [Client info: <Username: *******, Node Name: ********, IP Address: *******, Executable Name: CuriumAPI.exe, Internal Function: BP>] [%protocol: <50>] $Id: //dev/2017.

When trying to do an Atelier search, the scope section shows a little red 'X' next to the server dropdown box. Hovering over it shows a message stating that "the server does not support Atelier search."

What version of Cache is needed to allow for Atelier searching?

Hi,

I have a Caché project with some HTML files in a CSP folder.

Using Atelier when I access "Server Explorer" and execute the option "Copy to Project" to my local project I have this error:

Has anyone had this same problem? Any solution?

I'm trying write a JavaScript generator to perform pattern match validations using existing pattern match expressions in a legacy application.

I could make a server call to perform the pattern match operation but is there a way to automatically translate the pattern match expressions into RegEx expressions so I can perform the operation in JavaScript on the client to save making an Ajax call back to the server?

Thanks

Jay Ayliff

M-Tech

hi

when I logon linux with a not root user, and then call ccontrol start/stop cache,    show no permisson .

 how to grant start/stop/restore privilege to user who is not root .

thanks

Hello -

I was curious as to if there is any online documentation for TrakCare on how to default collapse this encounter timeline graph? I can't seem to find anything online so I figured I would reach out here. Instead of the timeline auto-expanding, I would simply like for it to be collapsed when opening up a patient's record.

I'm receiving HL7 message containing the escape sequence \X00D\ indicating a carriage return. In the HL7 documentation I find that this is a valid escape sequence but when I read the intersystems documentation it states that only \X0D\ is valid.

What is the best way to work around this? I think that intersystems should change the UnescapeEx method in the EnsLib.HL7.Segment so that it complies with the standards.

Hi all. When I try to do this in Apache Zeppelin:

  This error appears:

My jdbc interpreter:

Hi Community!

Please welcome a new session recording from Global Summit 2017:

What's Lurking in Your Data Lake?

I am trying to fetch the data from cache database. But i got the error like "CSP application closed the connection before sending a responce".

Below is the query.

SELECT
CallbackComment
FROM SQ.CBPhoneResult_View Where PhoneDateODBC = '2018-04-09'

I have investigated and found that "CallbackComment" contains the special character single quotes " ' "  for one result and due to this i got this error.

In this field data is enter by customer. so we cannot restrict them like Do Not use single quotes.

Please provide some solution as soon as possible.

Thanks in advance. 

Hello everyone,
what does it mean: <INVALID OREF>zgetFile+8^User.Read.1
(getFile is my ClassMethod and Read.cls is my class)?
I just try to read/load a file.

In this series of articles, I'd like to present and discuss several possible approaches toward software development with InterSystems technologies and GitLab. I will cover such topics as:

• Git 101
• Git flow (development process)
• GitLab installation
• GitLab Workflow
• Continuous Delivery
• GitLab installation and configuration
• GitLab CI/CD
• Why containers?
• Containers infrastructure
• CD using containers
• CD using ICM

In this article, we'll build Continuous Delivery with InterSystems Cloud Manager. ICM is a cloud provisioning and deployment solution for applications based on InterSystems IRIS. It allows you to define the desired deployment configuration and ICM would provision it automatically. For more information take a look at First Look: ICM.

Hi Everybody!

We are pleased to invite you to the upcoming webinar "Sharding as the basis of Scaling in InterSystems IRIS Data Platform" on 24th of July at 10:00 (Moscow time)!

Hi everyone.

I have a cube with two dimensions, DimA and DimB, with the following structure:

DimA/H1/LevelA

DimA/H1/LevelC

DimB/H1/LevelB

DimB/H1/LevelC

LevelC is modeled in such way because its bound property (C) is group by properties A and B in transactional database, but A and B haven't relation.

I can use DeepSee REST API service /Info/FilterMembers/:datasource/:filterSpec specifying each dimension one filterSpec parameter and handle the results.

But, I would like to have the results for both dimension in only on service call.

Is that possible?

Lost the raid array on our server. We were able to recovery all the data from backup but now are running into road blocks getting the Cache database up and running. We are running version 5.0.7 which is quite old but works for our needs. Our most current road block it is getting CTTerm (Telnet) to connect with the database. After entering the user and password nothing happens beside the carriage return dropping down one more line in CTTerm.  If you are familiar with the older revs of Cache please feel free to contact me or provide input.  Any help or direction would be invaluable to us.

Hi, Community!

Here is the July and I'm pleased to update with new features on DC appeared with July release.

What's new? Bookmarks, better group/tag subscriptions, new filters and cosmetic fixes. See the details below.

Im using below code to display page number. But i only display as 1,2..etc. I need to display it as I,II,III..etc...

special="page-number"

Hello everyone

I have a problem with $ ZF (-1)

I need to delete file from windows folder example c: \ sys \ text.txt, when executing the w $ zf (-1, "c: \ sys \ text.txt") command, the file does not delete.
There is some other cache command that performs this task.

hugs

Davidson

Hi, I found some issues with $ZF(-100) whilst replacing our old $ZF(-1) calls following the security alert. They're easy enough to work around, just figured it might be useful to someone :)

There seems to be some inconsistency with how $ZF(-100) is functioning between Unix and Win, contrary to the documentation. For example, for a simple ‘output directory listing to file’  operation:

Windows:

set dev="dir.txt"

set com="dir"

set options(1)=""

set options(2)="e:\nbupg\webserver\"

w $ZF(-100,"/SHELL /STDERR=""NUL"" /STDOUT="_dev,com,.

I am trying to write a generic process that will take any incoming message but would like to know where it came from so in my code I would like to do something like this

If (Document.Source="some serviceorProcess").

Just to be clear in the route you get these features is there a way of accessing them in code

Often, the first time I start up Eclipse (Atelier plug-in), all of my local classes indicate "warning" as if they are out-of-sync. When I  try to synchronize, I get the following error:

Synchronization failed: [server is broken] java.lang.ClassNotFoundException: Provider org.glassfish.jersey.internal.RuntimeDelegateImpl could not be instantiated: java.lang.IllegalStateException: No generator was provided and there is no default generator registered

The only way to correct this is to shut down Eclipse and restart. Is there a resolution for this?

Hi,

When i try to configure my server connection in Atelier (Eclipse), i am getting the below exception.

java.lang.ClassNotFoundException: Provider org.glassfish.jersey.internal.RuntimeDelegateImpl could not be instantiated: java.lang.IllegalStateException: No generator was provided and there is no default generator registered

It was all working fine and i think that the only thing which i have done was installing some windows updates. Now when i try to configure the server configuration i started getting the above error, any suggestions to fix this?

Thanks,

Shameer 

Hi All,

On button click from my zen page am calling the $System.SQL.ShowPlan() to calculate the cost of the SQL query.

In Cache` 2016.2 I faced a problem , when the logged in user didn't have the %development resource(<PROTECT> error).

But in Cache` 2017.2 it's working without the %development resource.

Is there any changes done on this area in the versions above 2016.2.

Thanks,

Dinesh

I try to run below two statements

Set tRS = ##class(%ResultSet).%New("%Dictionary.ClassDefinition:SubclassOf")
​set tSC = tRS.Execute("%Persistent")

and I always get <PROTECT>check+5^%Dictionary.ClassDefinitionQuery.1

The login user is _SYSTEM and should have all the permissions.

I cannot run queries in the $SYSTEM.SQL.Shell(). I would get <PROTECT>%GenerateMetadata+16^%SQL.StatementMetadata.1

However, when I run the query through SMP, everything is fine.

Any idea where could I start to investigate ?

Thanks.

or "Didn't you say you would cover Persistent Objects in Part 5, Chris?"

Yes, that was the plan.  This is a pretty important topic, so it get's its own Article

Up until now, we've display widget JSON that has been created by a basic loop.  Clearly this isn't of much value.  Now we have our stack connected together, and we can see that the data is flowing to the Welcome page, it's time to complete the stack and start feeding our service from "real" data.

Let's start with our (very basic) Persistent class for Widgets.  We have 4 properties to hold Name, Description, Price and current Quantity.

Hi everyone,

I am still learning the platform for a student project and have to do some streaming and data analysis next. Since for my case I have no "live api" I wanted to just stream json files and output the data as it comes in from the files. (basically to emulate a incoming data scenario)

So thanks to the documentation and community posts I have figured how to create a stream and read data from a JSON but since I'm also new to JSON I have some parsing problems. I don't know how to access subarrays/sub-objects via objectscript.