InterSystems supports use of the InterSystems IRIS Docker images it provides on Linux only. Rather than executing containers as native processes, as on Linux platforms, Docker for Windows creates a Linux VM running under Hyper-V, the Windows virtualizer, to host containers. These additional layers add complexity that prevents InterSystems from supporting Docker for Windows at this time.

12 12
6 2,803

Google Cloud Platform (GCP) provides a feature rich environment for Infrastructure-as-a-Service (IaaS) as a cloud offering fully capable of supporting all of InterSystems products including the latest InterSystems IRIS Data Platform. Care must be taken, as with any platform or deployment model, to ensure all aspects of an environment are considered such as performance, availability, operations, and management procedures.  Specifics of each of those areas will be covered in this article.

6 0
3 2,771

Often InterSystems technology architect team is asked about recommended storage arrays or storage technologies.  To provide this information to a wider audience as reference, a new series is started to provide some of the results we have encountered with various storage technologies.  As a general recommendation, all-flash storage is highly recommended with all InterSystems products to provide the lowest latency and predictable IOPS capabilities.

The first in the series was the most recently tested Netapp AFF A300 storage array.  This is middle-tier type storage array with several higher models above it.  This specific A300 model is capable of supporting a minimal configuration of only a few drives to hundreds of drives per HA pair, and also capable of being clustered with multiple controller pairs for tens of PB's of disk capacity and hundreds of thousands of IOPS or higher. 

3 0
0 2,750
Article
Tony Pepper · May 25, 2016 5m read
Random Read IO Storage Performance Tool

Purpose

This tool is used to generate random read Input/Output (IO) from within the database. The goal of this tool is to drive as many jobs as possible to achieve target IOPS and ensure acceptable disk response times are sustained. Results gathered from the IO tests will vary from configuration to configuration based on the IO sub-system. Before running these tests ensure corresponding operating system and storage level monitoring are configured to capture IO performance metrics for later analysis.

12 17
1 2,708

Created by Daniel Kutac, Sales Engineer, InterSystems

 

Part 3. Appendix

InterSystems IRIS OAUTH classes explained

In the previous part of our series we have learned about configuring InterSystems IRIS to act as an OAUTH client as well as authorization and authentication server (by means of OpenID Connect). In this final part of our series we are going to describe classes implementing InterSystems IRIS OAuth 2.0 framework. We will also discuss use cases for selected methods of API classes.

The API classes implementing OAuth 2.0 can be separated into three different groups according to their purpose. All classes are implemented in %SYS namespace. Some of them are public (via % package), some not and should not be called by developers directly.

7 0
2 2,478

As a developer, you have probably spent at least some time writing repetetive code. You may have even found yourself wishing you could generate the code programmatically. If this sounds familiar, this article is for you!

We'll start with an example. Note: the following examples use the %DynamicObject interface, which requires Caché 2016.2 or later. If you are unfamiliar with this class, check out the documentation here: Using JSON in Caché. It's really cool!

18 2
3 2,343

Terminal scripts can be used to run pre-designed commands on the terminal, like a batch file.  You can write anything that can be executed on terminal, like for loop, if else and so on,  inside Terminal scripts. In this article, I will show you how to call Terminal scripts, how to use parameters in Terminal scripts and how to avoid session disconnected when running Terminal scripts. If you have any information about how to use Terminal scripts or you have any feedback, please feel free to leave a comment.

4 6
2 2,303
Article
Eduard Lebedyuk · Mar 14, 2018 10m read
REST Design and Development

Intro

For many in today's interoperability landscape, REST reigns supreme. With the overabundance of tools and approaches to REST API development, what tools do you choose and what do you need to plan for before writing any code?
This article focuses on design patterns and considerations that allow you to build highly robust, adaptive, and consistent REST APIs. Viable approaches to challenges of CORS support and authentication management will be discussed, along with various tips and tricks and best tools for all stages of REST API development. Learn about the open-source REST APIs available for InterSystems IRIS Data Platform and how they tackle the challenge of ever-increasing API complexity.
The article is a write-up for a recent webinar on the same topic.

6 5
4 2,279

Hi!

Want to share with you code snippet of try catch block I usually use in methods which should return %Status. 


{ 
 try {
  	$$$TOE(sc,StatusMethod())
 }
 catch e {
 	set sc=e.AsStatus()
 	do e.Log()
 }

Quit sc 
}

Here $$$TOE is a short form of $$$TROWONERROR macro.

Inside macro StatusMethod is any method you call which will return %Status value. This value will be placed into sc variable.

3 21
1 2,255

Database systems have very specific backup requirements that in enterprise deployments require forethought and planning. For database systems, the operational goal of a backup solution is to create a copy of the data in a state that is equivalent to when application is shut down gracefully.  Application consistent backups meet these requirements and Caché provides a set of APIs that facilitate the integration with external solutions to achieve this level of backup consistency.

1 7
2 2,219

Myself and the other Technology Architects often have to explain to customers and vendors Caché IO requirements and the way that Caché applications will use storage systems. The following tables are useful when explaining typical Caché IO profile and requirements for a transactional database application with customers and vendors.  The original tables were created by Mark Bolinsky.

In future posts I will be discussing more about storage IO so am also posting these tables now as a reference for those articles. 

9 7
2 2,156

One of the great availability and scaling features of Caché is Enterprise Cache Protocol (ECP). With consideration during application development distributed processing using ECP allows a scale out architecture for Caché applications. Application processing can scale to very high rates from a single application server to the processing power of up to 255 application servers with no application changes.

9 6
2 2,153

In my previous article, we reviewed possible use-cases for macros, so let’s now proceed to a more comprehensive example of macros usability. In this article we will design and build a logging system.

Logging system

Logging system is a useful tool for monitoring the work of an application that saves a lot of time during debugging and monitoring. Our system would consist of two parts:

  • Storage class (for log records)
  • Set of macros that automatically add a new record to the log

12 6
6 2,084

In this article, I would like to talk about the spec-first approach to REST API development.

While traditional code-first REST API development goes like this:

  • Writing code
  • REST-enabling it
  • Documenting it (as a REST API)

Spec-first follows the same steps but reverse. We start with a spec, also doubling as documentation, generate a boilerplate REST app from that and finally write some business logic.

This is advantageous because:

  • You always have relevant and useful documentation for external or frontend developers who want to use your REST API
  • Specification created in OAS (Swagger) can be imported into a variety of tools allowing editing, client generation, API Management, Unit Testing and automation or simplification of many other tasks
  • Improved API architecture.  In code-first approach, API is developed method by method so a developer can easily lose track of the overall API  architecture, however with the spec-first developer is forced to interact with an API from the position if API consumer which usually helps with designing cleaner API architecture
  • Faster development - as all boilerplate code is automatically generated you won't have to write it, all that's left is developing business logic.
  • Faster feedback loops - consumers can get a view of the API immediately and they can easier offer suggestions simply by modifying the spec

Let's develop our API in a spec-first approach!

11 4
8 2,001
Article
Luca Ravazzolo · Jan 31, 2018 3m read
Container - What is a Container?

Containers

With the launch of InterSystems IRIS Data Platform, we provide our product even  in a Docker container. But what is a container?

The fundamental container definition is that of a sandbox for a process.  

Containers are software-defined packages that have some similarities to virtual machines (VM) like for example they can be executed. 

Containers provide isolation without a full OS emulation. Containers are therefore much lighter than a VM. 

9 20
2 1,967

In this post, I am going to detail how to set up a mirror using SSL, including generating the certificates and keys via the Public Key Infrastructure built in to Caché. The goal of this is to take you from new installations to a working mirror with SSL, including a primary, backup, and DR async member, along with a mirrored database. I will not go into security recommendations or restricting access to the files. This is meant to just simply get a mirror up and running.

4 7
0 1,940

GraphQL is a standard for declaring data structures and methods of data access that serves as a middleware layer between the client and the server. If you’ve never heard about GraphQL, here is a couple of useful online resources: here, here and here.

In this article, I will tell you how you can use GraphQL in your projects based on InterSystems technologies.

15 24
10 1,915

Globals, these magic swords for storing data, have been around for a while, but not many people can use them efficiently or know about this super-weapon altogether.

If you use globals for tasks where they truly shine, the results may be amazing, either in terms of increased performance or dramatic simplification of the overall solution (1, 2).

Globals offer a special way of storing and processing data, which is completely different from SQL tables. They were first introduced in 1966 in the M(UMPS) programming language, which was initially used in medical databases. It is still used in the same way, but has also been adopted by some other industries where reliability and high performance are top priorities: finance, trading, etc.

Later M(UMPS) evolved into Caché ObjectScript (COS). COS was developed by InterSystems as a superset of M. The original language is still accepted by developers' community and alive in a few implementations. There are several signs of activity around the web: MUMPS Google group, Mumps User's group), effective ISO Standard, etc.

Modern global based DBMS supports transactions, journaling, replication, partitioning. It means that they can be used for building modern, reliable and fast distributed systems.

Globals do not restrict you to the boundaries of the relational model. They give you the freedom of creating data structures optimized for particular tasks. For many applications reasonable use of globals can be a real silver bullet offering speeds that developers of conventional relational applications can only dream of.

Globals as a method of storing data can be used in many modern programming languages, both high- and low-level. Therefore, this article will focus specifically on globals and not the language they once came from.

14 10
0 1,879
Article
Pravin Barton · Mar 28, 2019 2m read
ObjectScript error handling snippets

ObjectScript has at least three ways of handling errors (status codes, exceptions, SQLCODE, etc.). Most of the system code uses statuses but exceptions are easier to handle for a number of reasons. Working with legacy code you spend some time translating between the different techniques. I use these snippets a lot for reference. Hopefully they're useful to others as well.

 

20 5
15 1,877

In this post I would like to talk about the syslog table.  I will cover what it is, how you look at it, what the entries really are, and why it may be important to you.  The syslog table can contain important diagnostic information.  If your system is having any problems, it is important to understand how to look at this table and what information is contained there.

15 1
1 1,805

Keywords: Python, JDBC, SQL, IRIS, Jupyter Notebook, Pandas, Numpy, and Machine Learning 

1. Purpose

This is another 5-minute simple note on invoking the IRIS JDBC driver via Python 3 within i.e. a Jupyter Notebook, to read from and write data  into an IRIS database instance via SQL syntax, for demo purpose. 

6 1
2 1,732

In this article, we’ll build a highly available IRIS configuration using Kubernetes Deployments with distributed persistent storage instead of the “traditional” IRIS mirror pair. This deployment would be able to tolerate infrastructure-related failures, such as node, storage and Availability Zone failures. The described approach greatly reduces the complexity of the deployment at the expense of slightly extended RTO.

22 15
5 1,731

Hi Developers!

Often when we develop some library, tool, package, whatever on InterSystems ObjectScript we have a question, how we deploy this package on the target machine?

Also, we often expect that some other libraries already installed, so our package depends on them, and often on some particular version of it.

When you code on javascript, python, etc the role of packages deployment with dependency management takes package manager.

So, I'm pleased to announce that InterSystems ObjectScript Package Manager available!

12 12
3 1,682