#InterSystems IRIS for Health

Hello every one, 

I am a rookie and i am willing to gain some experience on IRIS for Health by doing some development. 

I went through the website and found only an online development environment. 

But I want to take it a step further ahead bu downloading the software for my own and trying something new. 

But, unfortunately I did not find a link to download the IRIS for Health.

I would be pleased if there is any one who has the link to help me out with it. 

Hoping to hear soon. 

Regards. 

Stay Blessed. 

Stay Safe. God Bless. 

Hello Developers!

Previously, I shared with you all a handy operational analytics dashboard you can build to visualize key message processing metrics, such as number of inbound/outbound messages, average processing times, etc.

This time around, I’d like to walk you through an enhanced log monitor using a workflow many of you are already familiar with – working with alerts as messages inside a production, creating routing rules to filter and route alerts, and using pre-built components like the email adapter to send notifications at a granular level.

Is there an undocumented class method that will output the FQDN?

$SYSTEM only reports the part of the name concatenated with the namespace. Checking $SYSTEM.INetInfo doesn't provide the full DNS name, only a partial value that matches $SYSTEM.

I can do a call out to the OS to get that value which seems to be the only way I can get the value.

GA releases are now published for the 2020.3 version of InterSystems IRIS, InterSystems IRIS for Health, and InterSystems IRIS Studio!

A full set of containers for these products is available from the WRC Software Distribution site, including community editions of InterSystems IRIS and InterSystems IRIS for Health. In addition, all containers are also available from the new InterSystems Container Registry. This article explains how to use the registry.

The build number for these releases is 2020.3.0.221.0.

I have a class that has 2 different cursors for different queries, audit1 and audit2. which are in 2 different methods. The first query runs fine, but the second one generates a 102 error.

Is there an issue with having more than 1 cursor in a class?

Has anyone seen this before?

Hi i have rules and i want to log them to analyse what rules executed , I want to add in the log Msg Controller Id, MRN, Value coming in the message, and my customize text telling whats wrong with this field... i have like 50 rules and at the end i can check the log table and found like 20 entries so it means 20 data issues are there for a given message control id. any advice how to to do it

Hi,

Does anyone have a simple code snippet to encode and upload a raw text to Azure Blob?

I'm looking for any  reference documents on migrating about 3 TB of data from DB2 to IS IRIS Healthshare..  I've looked through the IS  documentation  and SQL gateway, or TSQL are some of the methodologies mentioned , was wondering  if anyone had done this type of migration before, and can provide any pointers.

InterSystems has corrected a defect that can cause a build-up of orphaned processes consuming system resources. In extreme cases, this can cause a system to become unresponsive.

This defect affects the following versions:

• Caché and Ensemble 2018.1.4
• InterSystems IRIS and InterSystems IRIS for Health 2019.4, 2020.1, and 2020.2
• HealthShare Health Connect (HSAP) 15.032 built on Ensemble 2018.1.4
• HealthShare Health Connect 2020.1

No other InterSystems product versions are affected by this issue.  Specifically, earlier versions of Caché and Ensemble, Health Connect 2019.1 and 2019.1.

Hi Community!

Enjoy watching the new video on InterSystems Developers YouTube:

⏯ Use Case: Connecting Devices to IRIS for Health to Improve Patient Care

Getting routingrules compiling error message. same code works fine for IRIS For Health

/// 
Class Training.HL7Validation.RoutingRule Extends Ens.Rule.Definition
{
Parameter RuleAssistClass = "EnsLib.HL7.MsgRouter.RuleAssist";
XData RuleDefinition [ XMLNamespace = "http://www.intersystems.com/rule" ]
{
<ruleDefinition alias="" context="EnsLib.HL7.MsgRouter.RoutingEngine" production="Training.HL7Validation">
<ruleSet name="" effectiveBegin="" effectiveEnd="">
<rule name="Valid Sending Facility Code Required">
<when condition="Lookup(&quot;OnboardedFacilities&quot;,HL7.{MSH:SendingFacility.

You might have encountered this and not known how to prevent it, or perhaps not even noticed it...

Hi Community!

We're pleased to invite you to the Online meetup with the winners of the InterSystems FHIR programming contest!

Date & Time: Friday, September 4, 2020 – 11:00 EDT

What awaits you at this virtual Meetup? 

• Our winners' bios.
• Short demos on their applications.
• A short interview with all the winners about the past contest. Plans for the next contests.

Hi

can I have two business services listening on same port ?

so let’s say

service a port 51000

service b port 51000

this way we don’t need to open port every time we add new service 

Hi 

Getting error message, when calling NACK function that I created. Its working fine on Iris For HeathShare but on HealShare its giving below error msg. Any help.

Error message

Compiling class Hospital.RoutingRules ERROR <Ens>ErrParsingExpression: Error parsing expression 'GenerateNACK("For NewBorn Msg, PID21 Mother Idendentifier should have MRN number",%ErrorStatus)': ERROR <Ens>ErrInvalidName: Invalid name at offset 83   > ERROR #5490: Error running generator for method 'evaluateRuleDefinition:Hospital.RoutingRules' ERROR: Ens.Rule.Definition.

Hi Community!

Enjoy watching the new video on InterSystems Developers YouTube:

⏯ Using IRIS for Health to Reduce Readmissions

Hello,

Recently I tried to connect to JDBC on IRIS 2020.3+ and I came across the following error:

 SQL Error [461] [08S01]: [InterSystems IRIS JDBC] Communication link failure: Communication error: Server closed communication device

This error implies that the port is not open.

Checking with the netstat command:

irisowner@78c3e30b7f41:/opt/irisapp$ netstat -a
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State     
tcp 0 0 0 0.0.0.0:1972 0.0.0.0:* LISTEN    
tcp 0 0 127.0.0.11:38005 0.0.0.0.0:* LISTEN    
tcp 0 0 0.0.0.0:52773 0.0.

Hi Developers!

The InterSystems IRIS for Health FHIR Contest is over. Thank you all for participating in our FHIR Competition!

And now it's time to announce the winners! 

A storm of applause goes to these developers and their applications:

Hey Developers!

This week is a voting week for the InterSystems IRIS for Health FHIR Contest!

So, it's time to give your vote to the best FHIR solutions built with InterSystems IRIS for Health.

🔥 You decide: VOTING IS HERE 🔥

How to vote? This is easy: you will have one vote, and your vote goes either in Experts Nomination or in Community Nomination.

The fhir-react project defines a unique component which renders the interface based on FHIR resource type. There's no need for any configuration because the library uses the standard of defined by the resource type.

So, I decided to apply the same idea, but for charts. The basic idea is depicted below:

For instance, some FHIR resources like Observation, Condition etc., has a code. Thus, we can aggregate all codes and count them.

Such aggregation creates a standard data model.

Finally, this model could be adapted for any char library.

The fhir-react project is a React UI framework based on Google Material Design, which covers almost all FHIR resources for versions DSTU2, STU3 and R4.

It design it's really friendly - there's just one component! As FHIR resource types are standards, the framework resolves internally what rendering class must be used.

To display your FHIR resource just write this component:

<FhirResource fhirResource={fhirResource} fhirVersion={fhirVersions.STU3} />

Where fhirResource is a JSON containing any FHIR resource.

Hello Developer Community!

We are looking to better understand how our users configure and manage our products. If you have a few minutes, please fill out this quick survey https://www.surveymonkey.com/r/N2JX3TQ

If you're willing to participate in an in-depth interview about your experiences, you might be eligible for a $100 gift card! Indicate in the survey that you'd like to talk to us and we will be in touch the second week in September!

Feedback from real users like you in invaluable to us and helps us create better product. 

Thank you so much!

As I said in the previous article, I started to learn about FHIR for the contest, and I'd like to share an update in my application: detection of inconsistencies in FHIR data.

Note: This document it's also availble in GitHub.

A useful usage for FHIR unified schema is search for inconsistencies. As suggested by @Qi Li, one example could be find patients with records for diabetes medication, however, without diabetes condition.

Another example is search conditions with findings (like diabetes, for instance) and a record for resources denoting "no known problems", e.g.

Hi Developers!

Here're the technology bonuses for the FHIR programming contest that will give you extra points in the voting:

• FHIR Server REST API usage 
• The usage of SQL Schema of FHIR Resources 
• Healthcare standards data transformation
• Docker container usage

See the details below.

Hi,  

In my previous articles, one of the most exciting things about FHIR that I mentioned it's the wide range of possibilities that we have and not only for creating something but the ways to achieve this goal.

Whats NLP Stands For?

NLP stands for Natural Language Processing which is a field of Artificial Intelligence with a lot of complexity and techniques to in short words "understand what are you talking about".

And FHIR is...???

FHIR stands for Fast Healthcare Interoperability Resources and is a standard to data structures for healthcare. There are some good articles here explainig better how FHIR interact with Intersystems IRIS.

My Solution

Chatbot to query FHIR

Introduction

In a previous article, I discussed patterns for running unit tests via the  InterSystems Package Manager. This article goes a step further, using GitHub actions to drive test execution and reporting. The motivating use case is running CI for one of my Open Exchange projects, AppS.REST (see the introductory article for it here). You can see the full implementation from which the snippets in this article were taken on GitHub; it could easily serve as a template for running CI for other projects using the ObjectScript package manager.

Hi Community, 

I shared my experience working with FHIR for the first time in this article.

In that article, I wrote how I explored the FHIR Resources and talked about the information that I found useful in FHIR documentation.

The first version of my app only shows the information that FHIR Resource provides. 

I wanted to make the user able to update the patient details, so I to search for an example of how to do it. 

The Github page of fhir.js has an example of how to update a resource. 

Looking at this example made me think that it was effortless.

Hi Community,

I want to share my experience creating the iris-fhir-portal with FHIR.  

I decided to take a step forward and join the IRIS for Health FHIR contest, but I had never worked with FHIR before.

After the FHIR Contest Kick-Off Webinar, where we got an overview of how the IRIS for Health works with FHIR, I started to looking at the FHIR documentation to create my Patient Chart project.

At HL7 FHIR (release 4) website, I found a "Resource Map":

The leading FHIR Resource for my Patient Chart it's the "Patient Resource".

Hi guys.

Recently, I get interest in FHIR in order to run for the IRIS for Health FHIR contest. As a beginner on this topic, I've heard somewhat about it, but I didn't know how complex and powerful was FHIR. As pointed out by @Henrique.GonçalvesDias here, you can model several aspects of the patient history and other related entities.

Fortunately, the DC provide very nice material about FHIR and how IRIS for Health could help us to deal with such complexity.