#InterSystems IRIS for Health

I'm working on my first (!) IPM module and I'm a little puzzled with the registry authorization.

I have a working local registry (I hope!) and the module is loaded (with load-command) to the namespace.

Now publish-command fails because of missing authorization. I have set nothing authorization related myself and I'm lost how the authorization should be configured. All the material I have read so far seems to ignore that and only mentions one have to authenticate ...

Here's the command output:

zpm:IPMTEST1>version

%SYS>     zpm          0.7.3
IPMTEST1> zpm-registry 1.3.2
https://pm.

Hello,
Please, we would need your help 🙂:

In a development environment, we have added quite a few presentation contexts to the DICOM configurations (the associations). We would need to find a way to export them from this environment to make it easier for us to import them in PRO (and avoid doing it by hand one by one).

We know that there is this method, the ImportAssociation(), that given a file, and the names of the local AET and the remote AET, creates it automatically:
    https://docs.intersystems.com/irisforhealthlatest/csp/docbook/DocBook.U…?

I'm running a query, joining nine tables together. When I run it with a SELECT COUNT(*) I get about 200,000 rows. When I run the SELECT with the columns I want, I get about 2,700 rows. Is there something inherent with the queries that limits the result set size, or anything I can do to make sure I'm getting back all the results? Rather, than trying to run it about 100 times limiting all previously gotten accounts.

What table would I find the MRN in? I'm trying to write a crystal report and pull that field, but I cannot seem to find it in any of the tables, to be able to add to the report.

Thank you in advance for any help.

Hello,

Is there any document regarding the embedded sourceControl in HealthShare management portal GUI?

It has Status, Settings,GitWebUI,AddtoSC,Sync,NewBranch,SwitchBranch,Import, ImportForce buttons, I am pretty new to this and I am wondering what these buttons really do behind the scene and when I need to use them.

Thank you

Is anyone using the IPM client (e.g., running commands like zpm "install somepackagename") on an IRIS version earlier than 2022.1?

We're thinking about raising the minimum supported version so we can use Embedded Python in IPM. I'm curious if this would impact anyone. Of course, you'd be able to continue to use an earlier version of IPM.

How do you configure it to have source control on a namespace accessed via the InterSystems Server Manager extension?

An example from the video explains only how it will work with a cloned git repo on a local machine (PC/Mac), but so far, I can't get it to work on a remote development server (replacing existing remote Studio via RDP with local VS Code).

i am trying to embed a dynamic SQL into Objectscript code , but the %NEXT() will return 0 , however when i copy the same query and run it in the SQL bit it will give me the result i want 
the code :

set myquery = "SELECT"
set myquery = myquery_" $PIECE(Substring(M.Rawcontent,Charindex('PD1|',M.Rawcontent),1000),'|',4),"
set myquery = myquery_" H1.TargetConfigName,"
set myquery = myquery_" H.Timecreated,"
set myquery = myquery_" H.MessageBodyId"
set myquery = myquery_" FROM"
set myquery = myquery_" Ens.MessageHeader H"
set myquery = myquery_" left outer join Enslib_HL7.Message M ON (H.MessageBodyId=M.

We are excited to announce the newest addition to our early access program - the Health Data De-ID tool.

The tool will de-identify structured clinical data according to HIPAA Safe Harbor and allow for re-identification if required. It uses InterSystems’ SDA canonical format which is utilized for all our standard transformation from one format to another such as HL7 to CDA, HL7 to FHIR, etc.

If both fields are numeric and the result of subtraction of field1-field2 is positive, only then put the result is a data field.

I am doing this within an Iris DTL.

I don't find any functions like IsNumeric(). Once I get that, I can test if field1>0 and field2>0, do the subtraction, and test if diff>0.

I just need a function to determine if they are numeric, rather than some cumbersome way like a regex where the only characters are 0-9.

I see functions in documentation but don't see them used at tests, only in WRITE statements.

Thanks,

Jonathan

I am just writing something to share what I encountered last night, which is the IRIS 2024.3 does not comes with Python by default any more!!!

Which means that I need to install it by myself!!😅 The pros is, I can select my python version😁🤭💃 The trouble is.... at the first place.... I don't know what I should do😥. By going through the community (I am much more prefer than the official document, sorry InterSystems document team😓 ), I found the following piece 

https://docs.intersystems.com/iris20242/csp/docbook/DocBook.UI.

Our TEST environment and PROD environment are on two different versions of HealthShare Health Connect.

Is it possible to use one IIS server to configure Webgateway and external Webserver for management portal when implementing synchronous mirroring with VIP  i.e Is it necessary to have two mirror servers(primary and Backup) , one Arbiter server, one Webserver for Webgateway and a sperate webserver for management portal? 

If anyone can please point to any documentation on Mirroring with Webgateway and external webserver for management  portal will be really helpful. 

Thank you for your help

I'm trying out the package manager (IPM). I'm trying to create a local (private) registry. To me it looks like the local registry installation succeeded but I can't figure out how to use it.

I'm using latest stable v0.7.3.

I have uploaded one module there (as told in one forum post):

$ curl http://localhost:52774/registry/
{"version":"1.3.2"}
$ curl http://localhost:52774/registry/packages/-/all
[{"name":"objectscript-math","description":"Math library for InterSystems ObjectScript","repository":"https://github.com/psteiwer/ObjectScript-Math/","origin":"","versions":["0.0.

Is there anyway to delete a task if the namespace associated with task is already deleted?

We have a custom purge task which is associated with an old namespace( which is already deleted) . All the option in the task details are now disabled. Is there anyway to update it or delete it? 

Thankyou for your help

The IRIS Management Portal is localized (translated) for some (many?) languages and the language used by the Management Portal interface is determined by the browser settings, often derived from the OS settings (can be changed).

This means that if a user, like me, want to use ONLY the English version of the Management Portal, each and every time you login you need to change the language. VERY annoying.

I know I can change the language configured in Browser, BUT, I want to use English for the IRIS management portal non for all my internet activity!

Maintenance Releases 2023.1.5 & 2024.1.2 of InterSystems IRIS, IRIS for Health, & HealthShare HealthConnect are now available

Two extended maintenance releases of InterSystems IRIS, InterSystems IRIS for Health, and HealthShare Health Connect are now available.

✅ 2023.1.5

Release 2023.1.5 provides bug fixes for any of the previous 2023.1.x releases.

You can find the detailed change lists & upgrade checklists on these pages:

• InterSystems IRIS
• InterSystems IRIS for Health
• HealthShare Health Connect

✅ 2024.1.2

Release 2024.1.2 provides bug fixes for any of the previous 2024.1.x releases.

Hello Experts ,

Could you help to search message details based on MRN in intersytems iris. 

We have created 100+ interfaces and currenly in live (interystems cloud) . Now I try to search message details based on MRN using below query. it is working fine in DEV. but in prod it is taking ages.

SELECT Header.SessionId, Header.SourceConfigName ,Body.RawContent
FROM Ens.MessageHeader AS Header 
JOIN EnsLib_HL7.Message AS Body ON Header.MessageBodyId = Body.ID     
 where  Body.TimeCreated BETWEEN '2023-03-15 13:10:22.993' AND '2023-03-15 13:10:25.993'
 AND Body.

InterSystems FAQ rubric

The maximum number of namespaces that can be created in one instance is 2047. However, to use a large number of namespaces, you will need to configure memory accordingly.

The maximum number of databases (including remote databases) that can be created in one instance is 15998. Depending on the type of license, there may be restrictions on the number that can be created. For details, please refer to the following document.
Database Configuration [IRIS]
Database Configuration
 

Are there any objectscript functions (not wizards) to export and then import table data (including RowID)?

It doesn't matter what format the exported file is.

The import and export process should preserve all relationships, foreign keys, etc. I need to be able to export and import multiple tables at the same time.

I need this to implement the ability to export multiple tables from one instance and load them into another.

For export I tried %SQL.StatementResult.DisplayFormatted with the CSV option, but it doesn't handle column names. The first line of the file is not csv for some reason.

Hello everybody,

I’m trying to install WebTerminal but I’m not able to have it working. I’ve looked all around the in github and the community but no-one seems to have the same problem. So I hope sharing this someone can give me a hint
So, I’m installing it on IRIS HEALTH:

IRIS for UNIX (Red Hat Enterprise Linux 8 for x86-64) 2023.1.3 (Build 517U) Wed Jan 10 2024 13:30:33 EST [Health:5.1.0-2.m3] 

I install the packageWebTerminal-v4.9.5.xml via Portal Manager and all goes fine:

Importing Selected Classes from /intersystems/prog/IRISHEALTH/mgr/Temp/importfromlocal.streamImport to Namespace %SYS.

We have a requirement to use ALB/Reverse proxy like traefik. Is there any similar solution produce by webgateway or webgateway-ingenix container image?

Reference:
webgateway-nginx:2024.1

I was working on a DTL but kept getting ERROR #5002... MAXSTRING errors. The problem was that most of the DTL GUI action steps only support the string data type when working with the segments. A %String has a limit of 3,641,144 characters and my OBX5.1 was 5,242,952 characters long as the example provided. Of course PACS admin stated ultra high quality up to and including 4K resolution files were needed, so we could not get the vendor to compress or reformat these files to compressed jpg or something similar.

Initially this vendor sends a 2.3 ORU^R01 and our EHR (Epic) is expecting a

I'm experimenting with adapting SDA3 object model to store medical data in relational form, e.g.:

class Demo.DemoPatient extends (%Persistent, HS.SDA3.Patient) {}

The HS.SDA3.Patient class has the Aliases property which is a nested collection (list) of objects of type HS.SDA3.Name:

#dim record as Demo.DemoPatient = ##class(Demo.DemoPatient).%New()
set record.Name.FamilyName = "Clemens"
set record.Name.GivenName = "Samuel"
set record.BirthTime = "1935-11-30T12:00:00"
    
#dim alias as HS.SDA3.Name = ##class(HS.SDA3.Name).%New()
set alias.FamilyName = "Twain"
set alias.

In the past, I've created custom SQL operations, but now I had something trivial to do, so I decided to take EnsLib.SQL.Operation.GenericOperation out for a spin. There's no example in the docs, so it was a little tricky. Here's what I ended up doing:

In my external database, I have 'mytable' with two fields 'id1' and 'id2'. Here are the pertinent Business Operation settings:

SQL: select id2 from mytable where id1 = ?
Input Parameters: [1] *id1
RequestClass: Ens.

json file failing in conversion to SDA

• DO^zToQuickXML+11^HS.SDA3.NVPair.1 +2
• DO^zToQuickXML+34^HS.SDA3.CustomObject.1 +1
• DO^zToQuickXML+8^HS.Local.SDA3.CodeTableDetail.HealthCareFacilityExtension.1 +1
• DO^zToQuickXML+28^HS.SDA3.CodeTableDetail.HealthCareFacility.1 +1
• DO^zToQuickXML+6^HS.SDA3.Location.1 +1
• DO^zToQuickXML+12^HS.Local.SDA3.ProcedureExtension.1 +1
• DO^zToQuickXML+29^HS.SDA3.Procedure.1 +1
• DO^zToQuickXML+155^HS.SDA3.Container.1 +1
• $$^zToQuickXMLStream+5^HS.SDA3.QuickXML.1 +1

Hello,

First of all: thanks for your help, and thank you for your time.

Thanks for your time.

We have the following situation:

We are in a BPL, and we have defined 4 <call> asynchronous as follows:

First one name: "Enviar a Proceso NEGRIN"

The second one, named as: "Enviar a Proceso HUNSC"

The third one, titled: "Enviar a Proceso CHUIMI 02"

And the fourth and last one names as: "Enviar a Proceso Fuertev"

Inmediately after the 4 calls, we have a <sync> instruction which should wait for all of them to finish.

Hi all,

We have an restriction in a SQL database with a unique index.

We want to catch that exception when it tries to insert or update a value that violates the unique index condition.

// run the querySet tSC = ..Adapter.ExecuteUpdateParmArray(.nrows,SQL,.param)

// Check if there is any errorIf$$$ISERR(tSC)
{
	Set msgError = $System.Status.GetErrorText(tSC) 
	// Check here if the native error code is 2601 (Cannot insert duplicate key row into object 'MYPATIENTS' with unique index 'UQ_UNIQUE_INDEX')
	??????
}

I've tried to get the .

Hi All,

I'm trying to connect to an IRIS instance using VSCode, the problem is, there are 2 IRIS instances installed on this server, published by the same hostname using https (port 443) under 2 different subfolders (e.g., iris.demo.com/base & iris.demo.com/test).

When connecting via studio, I was able to connect by using the hostname (e.g., iris.demo.com) and specifying the super server port, while when connecting through VSCode, when specifying the web server port 443, the connection is always defaulted to one of the instance.

Is there any way we can specify the instance in VSCode?

Many thanks!

Hello Community,

This article aims to walk you through the process of setting up and utilizing the Flexible Python Runtime Feature for embedded Python. Prior to version 2024.2, Intersystems IRIS installer included a preinstalled version of Python, You can find the Python libraries and application files located in the \lib\python directory within your IRIS installation folder (for example, C:\InterSystems\IRIS20242\lib\python).

However, starting with version 2024.2, the IRIS installer no longer includes Python installation by default.