#InterSystems IRIS for Health

When trying to build a custom container, I'm getting a <LICENSE LIMIT EXCEEDED> during the build process.

Will this stop the container for building? Do I need a license in order to build a custom container?

Intersystems provides External language server connections for various languages which,
from a development perspective, is great as I can keep my application code separate but still interact with the IRIS kernel.

It becomes more complex though if you are using Interoperability etc where you might end up with some code in IRIS and some code in another language.
What would be great is having an IRIS to IRIS language server where the application code and stay IRIS based but separate from the database?

I hit halt in Iris lite terminal within VS Code and was exited out to PS prompt.  I was just curious what the best way / recommended way to get back into an InterSystems lite terminal would be?  Perhaps it is just to start a new InterSystems lite terminal from a the options listed previously in this post https://community.intersystems.com/post/how-run-objectscript-commands-v…; I was just curious if there was a way to kick it off again from the PS prompt?

Hi guys,

Is it possible to apply business rule on a XML without Schema?

Say, I'm trying to make some business rules on FHIR XML payload. I transferred the XML stream as an EnsLib.EDI.XML.Document in a BPL and passed it to a General Business Rule.

 Set context.xmlDocument = ##Class(EnsLib.EDI.XML.Document).ImportFromLibraryStream(##class(HS.SDA3.QuickStream).%OpenId(request.QuickStreamId))

I'm handling following XML document 

With this rule

Then I got stuck at visiting the elements in the XML.

I.e How may I evaluate the profile value？

Thanks。

Throughout the forum, I find examples of using the method getSegmentByIndex to get the segment as I loop through the HL7 message segments.

Today I spent way too long trying to figure out why I could not modify the segment with this same method. I reached out to my more experienced team and I showed where I got the base code from what I was doing, but I myself could not find the documentation of the method.

After some time, we stumbled upon the GetMutableSegmentAt and GetSegmentAt methods and plugged the mutable method in its place and what do you know, it worked!

Hi Guys,

I'm helping a partner to integrate IRIS to their project. They want to integrate Rules in there system.

For testing I built a simple rule as below:

/// 
Class Test.TestRule Extends Ens.Rule.Definition
{

Parameter RuleAssistClass = "Ens.Rule.GeneralBusinessRuleAssist";

XData RuleDefinition [ XMLNamespace = "http://www.intersystems.com/rule" ]
{
<ruleDefinition alias="" context="EnsLib.HL7.Service.

We've got some web services that utilise EnsLib.SOAP.Service/EnsLib.REST.Service. These do some further requests to a few operations to call some other services and return the combined results.

An issue that we are noticing is that some of the usage involves users hitting the refresh button a few too many times and generating a lot of requests. This is mostly an issue when the service that the operations are calling are down or slow to respond. IRIS starts using a lot of RAM when this occurs and has caused outages by getting through an extra 50-60GB of RAM.

Hello Community,

I have a stream property which uses %Stream.GlobalCharacter and I set some dummy texts like "a1a2a3a4a5a6a7...."(more than 1024 characters) in to that stream and the stream values are not compressed. However, The streams are compressed If I use the Lorem ipsum is a dummy or placeholder text or other text "This is part four of a long memo." which length is greater than 1024 

I opened the stream object and confirmed the compress property is 0 for first entry and  1 for 2nd object

Class Samples.Strms Extends %Persistent
{
Property MyId As %String;
Property MyBioStrm As 

I'm working on my first (!) IPM module and I'm a little puzzled with the registry authorization.

I have a working local registry (I hope!) and the module is loaded (with load-command) to the namespace.

Now publish-command fails because of missing authorization. I have set nothing authorization related myself and I'm lost how the authorization should be configured. All the material I have read so far seems to ignore that and only mentions one have to authenticate ...

Here's the command output:

zpm:IPMTEST1>version

%SYS>     zpm          0.7.3
IPMTEST1> zpm-registry 1.3.2
https://pm.

Hello,
Please, we would need your help 🙂:

In a development environment, we have added quite a few presentation contexts to the DICOM configurations (the associations). We would need to find a way to export them from this environment to make it easier for us to import them in PRO (and avoid doing it by hand one by one).

We know that there is this method, the ImportAssociation(), that given a file, and the names of the local AET and the remote AET, creates it automatically:
    https://docs.intersystems.com/irisforhealthlatest/csp/docbook/DocBook.U…?

I'm running a query, joining nine tables together. When I run it with a SELECT COUNT(*) I get about 200,000 rows. When I run the SELECT with the columns I want, I get about 2,700 rows. Is there something inherent with the queries that limits the result set size, or anything I can do to make sure I'm getting back all the results? Rather, than trying to run it about 100 times limiting all previously gotten accounts.

What table would I find the MRN in? I'm trying to write a crystal report and pull that field, but I cannot seem to find it in any of the tables, to be able to add to the report.

Thank you in advance for any help.

Hello,

Is there any document regarding the embedded sourceControl in HealthShare management portal GUI?

It has Status, Settings,GitWebUI,AddtoSC,Sync,NewBranch,SwitchBranch,Import, ImportForce buttons, I am pretty new to this and I am wondering what these buttons really do behind the scene and when I need to use them.

Thank you

Is anyone using the IPM client (e.g., running commands like zpm "install somepackagename") on an IRIS version earlier than 2022.1?

We're thinking about raising the minimum supported version so we can use Embedded Python in IPM. I'm curious if this would impact anyone. Of course, you'd be able to continue to use an earlier version of IPM.

How do you configure it to have source control on a namespace accessed via the InterSystems Server Manager extension?

An example from the video explains only how it will work with a cloned git repo on a local machine (PC/Mac), but so far, I can't get it to work on a remote development server (replacing existing remote Studio via RDP with local VS Code).

i am trying to embed a dynamic SQL into Objectscript code , but the %NEXT() will return 0 , however when i copy the same query and run it in the SQL bit it will give me the result i want 
the code :

set myquery = "SELECT"
set myquery = myquery_" $PIECE(Substring(M.Rawcontent,Charindex('PD1|',M.Rawcontent),1000),'|',4),"
set myquery = myquery_" H1.TargetConfigName,"
set myquery = myquery_" H.Timecreated,"
set myquery = myquery_" H.MessageBodyId"
set myquery = myquery_" FROM"
set myquery = myquery_" Ens.MessageHeader H"
set myquery = myquery_" left outer join Enslib_HL7.Message M ON (H.MessageBodyId=M.

We are excited to announce the newest addition to our early access program - the Health Data De-ID tool.

The tool will de-identify structured clinical data according to HIPAA Safe Harbor and allow for re-identification if required. It uses InterSystems’ SDA canonical format which is utilized for all our standard transformation from one format to another such as HL7 to CDA, HL7 to FHIR, etc.

If both fields are numeric and the result of subtraction of field1-field2 is positive, only then put the result is a data field.

I am doing this within an Iris DTL.

I don't find any functions like IsNumeric(). Once I get that, I can test if field1>0 and field2>0, do the subtraction, and test if diff>0.

I just need a function to determine if they are numeric, rather than some cumbersome way like a regex where the only characters are 0-9.

I see functions in documentation but don't see them used at tests, only in WRITE statements.

Thanks,

Jonathan

I am just writing something to share what I encountered last night, which is the IRIS 2024.3 does not comes with Python by default any more!!!

Which means that I need to install it by myself!!😅 The pros is, I can select my python version😁🤭💃 The trouble is.... at the first place.... I don't know what I should do😥. By going through the community (I am much more prefer than the official document, sorry InterSystems document team😓 ), I found the following piece 

https://docs.intersystems.com/iris20242/csp/docbook/DocBook.UI.

Our TEST environment and PROD environment are on two different versions of HealthShare Health Connect.

Is it possible to use one IIS server to configure Webgateway and external Webserver for management portal when implementing synchronous mirroring with VIP  i.e Is it necessary to have two mirror servers(primary and Backup) , one Arbiter server, one Webserver for Webgateway and a sperate webserver for management portal? 

If anyone can please point to any documentation on Mirroring with Webgateway and external webserver for management portal will be really helpful. 

Thank you for your help

I'm trying out the package manager (IPM). I'm trying to create a local (private) registry. To me it looks like the local registry installation succeeded but I can't figure out how to use it.

I'm using latest stable v0.7.3.

I have uploaded one module there (as told in one forum post):

$ curl http://localhost:52774/registry/
{"version":"1.3.2"}
$ curl http://localhost:52774/registry/packages/-/all
[{"name":"objectscript-math","description":"Math library for InterSystems ObjectScript","repository":"https://github.com/psteiwer/ObjectScript-Math/","origin":"","versions":["0.0.

Is there anyway to delete a task if the namespace associated with task is already deleted?

We have a custom purge task which is associated with an old namespace( which is already deleted) . All the option in the task details are now disabled. Is there anyway to update it or delete it? 

Thankyou for your help

The IRIS Management Portal is localized (translated) for some (many?) languages and the language used by the Management Portal interface is determined by the browser settings, often derived from the OS settings (can be changed).

This means that if a user, like me, want to use ONLY the English version of the Management Portal, each and every time you login you need to change the language. VERY annoying.

I know I can change the language configured in Browser, BUT, I want to use English for the IRIS management portal non for all my internet activity!

Maintenance Releases 2023.1.5 & 2024.1.2 of InterSystems IRIS, IRIS for Health, & HealthShare HealthConnect are now available

Two extended maintenance releases of InterSystems IRIS, InterSystems IRIS for Health, and HealthShare Health Connect are now available.

✅ 2023.1.5

Release 2023.1.5 provides bug fixes for any of the previous 2023.1.x releases.

You can find the detailed change lists & upgrade checklists on these pages:

• InterSystems IRIS
• InterSystems IRIS for Health
• HealthShare Health Connect

✅ 2024.1.2

Release 2024.1.2 provides bug fixes for any of the previous 2024.1.x releases.

Hello Experts ,

Could you help to search message details based on MRN in intersytems iris. 

We have created 100+ interfaces and currenly in live (interystems cloud) . Now I try to search message details based on MRN using below query. it is working fine in DEV. but in prod it is taking ages.

SELECT Header.SessionId, Header.SourceConfigName ,Body.RawContent
FROM Ens.MessageHeader AS Header 
JOIN EnsLib_HL7.Message AS Body ON Header.MessageBodyId = Body.ID     
 where  Body.TimeCreated BETWEEN '2023-03-15 13:10:22.993' AND '2023-03-15 13:10:25.993'
 AND Body.

InterSystems FAQ rubric

The maximum number of namespaces that can be created in one instance is 2047. However, to use a large number of namespaces, you will need to configure memory accordingly.

The maximum number of databases (including remote databases) that can be created in one instance is 15998. Depending on the type of license, there may be restrictions on the number that can be created. For details, please refer to the following document.
Database Configuration [IRIS]
Database Configuration
 

Are there any objectscript functions (not wizards) to export and then import table data (including RowID)?

It doesn't matter what format the exported file is.

The import and export process should preserve all relationships, foreign keys, etc. I need to be able to export and import multiple tables at the same time.

I need this to implement the ability to export multiple tables from one instance and load them into another.

For export I tried %SQL.StatementResult.DisplayFormatted with the CSV option, but it doesn't handle column names. The first line of the file is not csv for some reason.

Hello everybody,

I’m trying to install WebTerminal but I’m not able to have it working. I’ve looked all around the in github and the community but no-one seems to have the same problem. So I hope sharing this someone can give me a hint
So, I’m installing it on IRIS HEALTH:

IRIS for UNIX (Red Hat Enterprise Linux 8 for x86-64) 2023.1.3 (Build 517U) Wed Jan 10 2024 13:30:33 EST [Health:5.1.0-2.m3] 

I install the packageWebTerminal-v4.9.5.xml via Portal Manager and all goes fine:

Importing Selected Classes from /intersystems/prog/IRISHEALTH/mgr/Temp/importfromlocal.stream
Import to Namespace %SYS.

We have a requirement to use ALB/Reverse proxy like traefik. Is there any similar solution produce by webgateway or webgateway-ingenix container image?

Reference:
webgateway-nginx:2024.1