#HealthShare

InterSystems is pleased to announce the availability of the following maintenance releases:

• Caché and Ensemble 2017.1.1
• HealthShare Health Connect v15.021 on core technology 2017.1.1

Caché and Ensemble are available on the same platforms as 2017.1.0, except as noted below

• The full list of corrections can be found in the release notes.
• The version number of the kits for these releases is 2017.1.1.111.0
• Oracle Solaris 10, 11 for SPARC-64 and Oracle Solaris 10, 11 for x86-64 are not yet approved.

HealthShare HealthConnect v15.021 on core technology 2017.1.1.111.

Take this  course to learn how data flows from HealthShare Information Exchange to Health Insight, along with the details of that data flow.

Hello,

I am wondering if there any mechanism available in the Healhtshare where send a request from the service to the operation without storing the Data on CACHE.DAT?

My company going to receive ADT's and CCDA's from an external source (Hospital), The incoming data will have two kinds of patients, our patients, and not our patients.  We do not want to keep the data on our servers of those patients that do not belongs to our company due to HIPPA complaint

Looking forward to hearing great ideas from this community.

Thank you

Raghu

Using the CSP Gateway is there a  way for an web application to mimics MLLP sockets connection? I have a requirement for no PHI in the DMZ and I wanted to see if there is a way to install the CSP Gateway in the DMZ to received inbound/outbound messages where the DB is in the protected zone.

We at George James Software are pleased to announce the release of version 2.6 of Serenji, our editor and debugger for Caché, Ensemble and HealthShare.
The main enhancement in 2.6 is the ability to run on a Linux <edit> or OS X </edit> workstation using Wine 1.8. More release details are here.
This is a free upgrade to users already holding an activation key. For new users a free 30 day evaluation period is granted upon installation.
John Murray
Senior Product Engineer
George James Software

Hi All -

Our environment has multiple instances of HealthShare installed and most are on separate VMs/servers. Does anyone have any ideas on how to efficiently manage user accounts across all of these multiple instances of HealthShare? As you can imagine, creating 10 separate Cache accounts on each instance during onboarding of new associates is cumbersome and tedious as is disabling them. We have yet to integrate with AD but we do have a Cyberark initiative under way but it is in the very early stages.

Hello,

I am interested in working with a third-party API in my instance of the Community Portal.  I was curious as to how you all work with third-party apis.  Do you typically connect directly from within a ZEN Mojo Page or do you route the request through an operation in the management portal?  Are there any sort of best practices I should be aware of?

Thanks,

Bob

Suppose I have an image and need to convert that image into a PDF for inclusion in an HL7.

I know that Zen Reports can display an image in a PDF but I do not want to view the image in a web page. I just need to convert the image to PDF in a Process and then include that PDF in an HL7. The  workflow would be like this:

Get image -> Convert image into PDF -> Include PDF in HL7 OBX.

I know how to do the last part to include PDF in HL7 OBX. Just need ideas on the first part.

Take this online course to learn the basics of SAML (Security Assertion Markup Language), the ways in which it can be used within Caché security features, and some use cases that can be applied to HealthShare productions.

Hi. What notifications are available, if any, when any part of an SDA has been modified (inserted, updated, deleted, etc...)?

Thanks in advance.

Hi, 

I can't work out how to use the Cache CA Server to process certificate request from external clients!

We are setting up an interface where we use SSL/TLS 'Mutual Authentication' to allow a client system to securely transmit document to  our server.

Hey all! I'd like to collect some feedback regarding searching for messages using the Message Viewer. I'd like to find out what things regarding the Message Viewer you all in the community have found difficult/confusing/poorly documented. This can of course include things that you don’t know how to do yet, but would like to learn about.

For an example, I’ve had issues searching through messages containing SDA for specific text fragments, because my searches always timeout or don’t return any matching messages.

 How to create an instance for the production class?

Prompted by this post about accessing a global at its original location after you have changed a mapping, here's a tip about one specific dropdown in Portal that's sometimes useful.

If your application is raising <PROTECT> errors and you're finding it hard to work out why, here's a way to get additional information.

First, if auditing is not already enabled, turn it on:

Then use "Configure System Events" (highlighted above) and locate the event named %System/%Security/Protect. In the screenshot below I used the Filter field to do this (type "protect" - highlighted below - and press TAB):

Notice that the Enabled column shows a value "No". By default <PROTECT> errors are not logged in the audit.

Hello everyone,

Currently we have 2 Windows servers in a clustered environment.  Is there a setting in HealthShare for a TCP/IP Operation to use the virtual IP address when initiating the connection, rather than the host IP address?  

Thanks in advance!

Hi,

I am trying to send an email in a producion using the EMailAlert business operation, class EnsLib.EMail.AlertOperation using NHS Mail.

Has anyone succeeded in doing this? If so can you tell me how.

Thanks Sue

I'm a beginner for hs2014

I try to write text file in ASCII format (encode CP874) from HS2014 (run on RHEL)

I try to use

o file:"WNSK\CP874\"
o file:"RSK\CP874\"
o file:"WNSK\THAW\
o file:"WNS"

but output file still in UTF-8 encoding

please advise me

Thk.

InterSystems is pleased to announce the availability of the following maintenance releases:

• Caché and Ensemble 2016.2.2
• HealthShare Health Connect v15.021 on two core technology releases, 2016.2.2 and 2017.1.0

Caché and Ensemble 2016.2.2 are available on the same platforms as 2016.2.1

• The full list of corrections can be found in the release notes.
• The build corresponding to these releases is 2016.2.2.853.0
• For complete platform details, please refer to the 2016.2 Supported Platforms document.

HealthShare Health Connect v15.021 for core technology 2016.2.2.853.

I only recently noticed the presence of a local database named CACHE alongside the more familiar CACHESYS, CACHELIB, CACHETEMP and CACHEAUDIT.

A bit of digging through the documentation archive led me to conclude that the CACHE database arrived in 2010.2, where the release notes say:

Note the lack of an accent on the words I have highlighted.

The above documentation is incorrect when it says "this database is mounted as read-only". In fact it is mounted RW. But the %DB_CACHE security resource that controls access to it only grants R as its public permission.

We are using an F5 load balancer to route public traffic to our IS server. My goal is to block public access to the Management Portal, and only allow what we want to expose, such as REST/SOAP services. At the F5, they can block URL wildcards or specific ports, so those are our options.

Since the URLs for the web services are in the same path ([host]/csp/healthshare/[namespace]/*), I can't see any URL wildcards happening. That leads me to ports; is there a way to put services on a specific port for all services, and everything else stay on a standard web port?

Hi all,

I was wondering if InterSystems offers any message profiling capabilities. What I mean by "message profiling" is essentially stats or metrics gathered from a collection of data submissions of a particular type. For instance, average number of segments  <XYZ> in a specific HL7 V2 message type. Or the number of sections found in a HL7 V3 CDA documents.

Curious if there is anything like this provided "out-of-box".

Thanks!

James

Has anyone filed an FDA Medical Class Device ?

I have been asked to register our software as a class 1 device and I have found a reference with Intersystems - http://www.accessdata.fda.gov/scripts/cdrh/cfdocs/cfRL/rl.cfm?lid=50158…

Has anyone done this before - got any tips and steps to follow?

Prior to 2017.1, whenever I created a new namespace using Portal on Ensemble or HealthShare it was automatically configured to host productions. This used to irritate me, because sometimes I'm setting up a namespace (for example, to host our Deltanji tool) that doesn't need the extra Ensemble baggage.

Sometimes I observe people scrolling manually down to the bottom of the Console Log document when they want to see the most recent messages. So I want to draw attention to the handy link that does the job for you in a single click:

If you deal with multiple instances of Caché / Ensemble / HealthShare and sometimes have to work at the Terminal command prompt, did you know that you can easily add extra information to that prompt which may help prevent you running a command on the wrong instance?

During startup a Caché/Ensemble/HealthShare instance must consult a parameter file to get some information it needs at the early stages of startup. By default it uses the file called cache.cpf, but by adding an extra argument to the ccontrol start command you can make it use an alternative file.

InterSystems is pleased to announce the simultaneous release of 2017.1.0 of Caché, Ensemble, and HealthShare Health Connect v15.02 

Some notes for Caché and Ensemble, including highlights, are:

• Enhanced OAuth 2.0 and OpenID Connect
• FIPS 140-2 Validated Cryptography for database encryption
• iKnow REST API
• Improved DocBook Search and efficiency of Ensemble Message Search
• For complete technical details of what’s changed, review the Caché release notes and the Ensemble release notes.
• The version number for these kits is 2017.1.0.792.

Hello,

i'd like to create a directory chain with  "EnsLib.FTP.OutboundAdapter"

i'm using it like that with the class file and it's working:

s file = ##class(%File).CreateDirectoryChain(directory)

But now i'd like to create a directory chain with the FTP Outbound but i don't know how , i didn't see a method to do that.

Thanks in advance.

In this posting I want to raise the profile of a feature that arrived in 2009.1 but is perhaps not very well known.

It is sometimes useful to make certain packages, globals or routines available to all of your namespaces. Of course you can add the necessary mappings whenever you create a new namespace, but here's a simpler way.

First you need a special namespace definition called %ALL Create it in the same way you'd create any namespace. It doesn't matter which database you set as its default for code and data.