#HealthShare

InterSystems has corrected a defect that can cause a build-up of orphaned processes consuming system resources. In extreme cases, this can cause a system to become unresponsive.

This defect affects the following versions:

• Caché and Ensemble 2018.1.4
• InterSystems IRIS and InterSystems IRIS for Health 2019.4, 2020.1, and 2020.2
• HealthShare Health Connect (HSAP) 15.032 built on Ensemble 2018.1.4
• HealthShare Health Connect 2020.1

No other InterSystems product versions are affected by this issue.  Specifically, earlier versions of Caché and Ensemble, Health Connect 2019.1 and 2019.1.

Hi all,

a HealthConnect customer of ours came across with a question to use an external service via REST and OpenID within one of his HealthConnect  (2020.1) productions. The overal idea is to send data to the external system after receiving a baerer token to use for the communication between HealthConnect and this system.

Since I´ve never done such thing before I have an idea to solve this task but looking for a best practise way to do so. Using the RESt-Api of the external system is not the question here.

Getting routingrules compiling error message. same code works fine for IRIS For Health

/// 
Class Training.HL7Validation.RoutingRule Extends Ens.Rule.Definition
{
Parameter RuleAssistClass = "EnsLib.HL7.MsgRouter.RuleAssist";
XData RuleDefinition [ XMLNamespace = "http://www.intersystems.com/rule" ]
{
<ruleDefinition alias="" context="EnsLib.HL7.MsgRouter.RoutingEngine" production="Training.HL7Validation">
<ruleSet name="" effectiveBegin="" effectiveEnd="">
<rule name="Valid Sending Facility Code Required">
<when condition="Lookup(&quot;OnboardedFacilities&quot;,HL7.{MSH:SendingFacility.

Is Cache the preferred database source for extracting data elements for use in Health Share Patient Index or is there a significant benefit in sourcing data from a warehouse, data mart, or MV? I realize that could be a loaded question with 100 other questions that may follow, however, if there is a known advantage to extracting data from a particular data storage type, the answer may highlight that point. 

Our team is in the inception and elaboration phase of using the Health Share Patient Index solution.

Hi

can I have two business services listening on same port ?

so let’s say

service a port 51000

service b port 51000

this way we don’t need to open port every time we add new service 

Hi 

Getting error message, when calling NACK function that I created. Its working fine on Iris For HeathShare but on HealShare its giving below error msg. Any help.

Error message

Compiling class Hospital.RoutingRules ERROR <Ens>ErrParsingExpression: Error parsing expression 'GenerateNACK("For NewBorn Msg, PID21 Mother Idendentifier should have MRN number",%ErrorStatus)': ERROR <Ens>ErrInvalidName: Invalid name at offset 83   > ERROR #5490: Error running generator for method 'evaluateRuleDefinition:Hospital.RoutingRules' ERROR: Ens.Rule.Definition.

Hi, we are implementing HIE for multiple hospitals, one question came from client on how do we decide how many edge productions ECR should be created. is there any guidelines that will help us to decide?  Also if we combine two hospital data into one ECR then also how do we decide which ones to combine together. Any guidelines will be appreciated.

This message contains two recent HealthShare Advisories, which are available below.

• Advisory: Consent API allows for the creation of consent policies for non-existing MPI IDs
• Advisory: Issue with Consent Processing in the Operational Data Store

These advisories are also on the InterSystems Product Alerts and Advisories page

September 1, 2020 – Advisory: Consent API allows for the creation of consent policies for non-existing MPI IDs

InterSystems has corrected a defect when using the Consent API, where it is possible to associate a consent policy with an MPI ID that does not yet exist.

Hello Developer Community!

We are looking to better understand how our users configure and manage our products. If you have a few minutes, please fill out this quick survey https://www.surveymonkey.com/r/N2JX3TQ

If you're willing to participate in an in-depth interview about your experiences, you might be eligible for a $100 gift card! Indicate in the survey that you'd like to talk to us and we will be in touch the second week in September!

Feedback from real users like you in invaluable to us and helps us create better product. 

Thank you so much!

Hi All,

What will be the best way to transfer the persistent data stored in the SQL tables from one instance of Healthshare to a new instance ?  Is there any InterSystems recommended process or documentation for this?

Thanks,

Mary

An error occured when HS.IHE.XDSb.Registry.Operations on the BUS sends query request to the registry. The error is 

Error 6242: HTTP request to SOAP webservice returned unexpected status: 403.

Any thoughts as to why? The settings on the components haven't changed. The process worked a few days ago. 

07/16/2020 14:54:07 *********************
Input to Web service with SOAP action = SOAP1.2
<env:Envelope xmlns:S="http://www.w3.org/2003/05/soap-envelope" xmlns:env="http://www.w3.org/2003/05/soap-envelope"><env:Header><To xmlns="http://www.w3.org/2005/08/addressing">https://crispapitest.azure-api.

Hi,

I've added a REST service which worked fine on our test system but failed on the production environment because UnknownUser does not have %All set and I really don't want it set on production (in fact I've also switched it off on test).

Is there a way to allow a single REST service to have unauthorised access?

I was thinking adding a resource/role to UnknownUser specifically for that service but I've never touched on Users/Roles/Resources so I'm struggling to work out what needs adding where.

Thanks

Im exporting our xml project from a QA server that has NOT upgraded to a production server that has been upgraded to HealthShare.

We are importing the exported xml over to this production server that is on HealthShare.

Now I havent been able to find the document link today, but I remember reading HealthShare puts all of the imports under a csp/healthshare/ directory.

We are able to view our .csp pages after importing them as xml into Studio on the production server running on HealthShare

The issue is the imported file gets imported on the server's filesystem MORE THAN ONCE at:

I am having difficulties with using the ..Strip() function in my DTL to strip the slash ( / ) from the phone number portion of an x12 834.  There are very few records that have the slash in the phone number, so I am trying to filter out any characters other than numbers so that all phone numbers are formatted 1112223333.

Here is the code portion of the strip:

       Set           HomePhone             ..Strip(source.{loop2000(k1).loop2100A.PER:CommunicationNumber},"*AW","-()/").

I am then checking the length of HomePhone.

Hi,

Can anyone  point me to an example of a DTL & Class method that can pull a base64 encoded PDF out of a MDMT02 message?

This is really asking for two things;

- how to make a DTL that extracts a specific subfield of an HL7 2.3 message into a message of its own,

and

- how to transform an base64 encoded document into its original binary form for writing to a file.

I'd also love to see an example of an HL7 2.n MDM^T02 ==> HL73.ITK2 non-coded CDA

I've seen some snippets in the community Q&A, but I've not been able to find any examples either here, or in the documentation or training materials.

Using the community edition of IRIS, how do I read the HealthShare and Trak doc?

It would be interesting if there is some recommended documentation about best practices using Healthshare for interoperability.

Also, some how-tos or frequently asked questions about ObjectScript.

Or event better, if there are experienced developers who would like to share some common habits on their work with Studio / ObjectScript, which are valuable to do the developing work better.

For example, How to get the XML of a class and write it into a REST operation:

...

Method X(pRequest As Mensajes.ServiciosGeneralRequest, ...){

set writer=##class(%XML.Writer).%New()
set status=

I send ORUs to a process where a transform is applied before sending the message to a process where the routing is handled. A recent request was made that when OBR:25="D" the message is also be faxed with transforms that have some similarities to the original, but not exactly the same. I copied the DTC, made the alterations, and created a separate rule to handle it. However, when I run a message through with a "D" in OBR:25, it is only sent to the routing process once.

Been cleaning up our production 2017.1 instance of Health Connect in preparation to a move to Health Connect 2020.1 (on IRIS!)

One thing I have found I we have built up a number of old classes and other configuration files.

It would be nice to start on the new server with a clean slate.

Is there any way to identify classes that haven't been used for a long time so they can be reviewed and removed?

Kind regards, 

Stephen

The request terminology sync task is currently producing this error: 

ERROR #6248: SOAP response is a SOAP fault: faultcode=wsse:FailedAuthentication
faultstring=The security token could not be authenticated or authorized
faultactor=
detail=

The task is running correctly on other edges. I checked the HS_Services password and its the same as on the other edges. Anyone has any thoughts as to what could be causing this and how I can fix it. 

Hello,

We wonder how could we send an HL7 message to a service to test it.

For example, we have a service, at localhost port 19111

We have tried to use SoapUI to send a REST POST request as follows:

At the event log we see the following trace:

Then, if we try with POSTMAN as follows:

We observe:

Would it be the only way to test services, pointing a TCP HL7 operation to the service, and send messages using the Test Action?

We mean that we are testing manually sending messages from the operation "ProbarADTs" to "Servicios.TCP.GeneralHospitalADT":

How could we do it from SoapUI or Postman?

As I've become a little more familiar with HealthShare, I'd like to start exploring different ways of doing things. To date, the bulk of my data transformations have been using DTL; only using ObjectScript for a few operations that write to external SQL tables that were largely based on examples provided by my sales engineer.

I'd like to trying doing all of the data transformation in a process using ObjectScript.

Is anyone have ever work on AS2 to push and pull the EDI? If yes please help me on this.

This message contains three recent HealthShare Advisories, which are available below.

I'm cautious not to ask too many questions on here, but there really doesn't seem to be a good XML end to end guide that explains these things. 

I have now a Business operation that's going to call a url like  https://directory.spineservices.nhs.uk/ORD/2-0-0/organisations/Y00334?_…

I'm looking the status of the practice- I tried date but again fell flat as i wan't able to ensure i only got the end date from the first <date> tags and not any subsequent dates. 

Managed to do it kinda in a class method like so 

  set httprequest = ##class(%Net.HttpRequest).%New()
    set httprequest.

Hi all

Does anyone have an easy way of reading the cdata in the xml response returned buy a Webservice?

At the moment I have a XML class and then I use read.Correlate() to read through that XML bit.  

However, depending on the message I have different things in the CData and I don't want to create a class for each one of these.

The API returns the cddata as  KeyValueOfstringstring.

My idea would be to send to my method the cdata as a parameter which is the KeyValueOfstringstring part of the response message and then deal with it...

Any help would be appreciated...

Best Regards

Good day all

I am a new developer in cache, I am trying to connect vscode to healthshare but i get the following error:

////Error: Error: Parse Error: Expected HTTP/////

Please help me on this.

My setting like this:

{

    "objectscript.conn": {

      "active": true,

      "label": "LOCAL",

      "host": "****",

      "port": 57772,

      "username": "***",

      "password": "***",

      "ns": "***",

      "https": false,

    },

    "objectscript.export.folder": "src", 

    "objectscript.serverSideEditing": false

  }

I have a code tag that performs some logic in a DTL, and want to add to it the ability to find the number of substrings delimited by a dollar sign ($) within a particular string. I have tried the following which compiles just fine, but generates an error when testing in the Data Transformation Builder.

ERROR <Ens>ErrException: <SUBSCRIPT>zTransform+985^LH.IAMON.IAMONORU1XsformDTC2.1 *DCOUNT() Encoded subscript 1 > 511 bytes -- logged as '-' number - @' set lineCount = DCOUNT(reportBody,"$")'

Hi All,

I was just wondering whether anyone can help, I have managed to configure LDAP within Healthshare [HealthShare Modules:Core:15.032.9688], and I am also able to login with my LDAP user.  However, I am unable to assign any roles to this user, the user  appears on the users page however, it does not appear in the dropdown list of users when you try to update a particular role in the roles page (I am not sure where I have gone wrong with this).  I can login with the user but I don't get any where far with it because it has no roles assigned to it.  Any help would be great.

I am using healthshare 2017.2 & developed API in vb.net . sometimes API gets error when system tries to connect Cache Database. why this error occurs randomly ?