#HealthShare

Hi anyone has created the user roles for UCR pls share details like if we want to create following roles what access rights should be give to each role.

UCR Admin - This user can stop/start productions, can enable/disable services, can run sql queries, can make changes in facility registries, assigning authority and other configuration.

UCR Developer - This user can add new services in the production but can not make any change in the registires and other configuraiton

I have  a SQL query that I want to run against MS SQL from cache ensemble using the SQL outbound adapter. If I run this query direct from MS SQL Studio it take about 7 seconds MAX and returns about half a million rows. The row only contains one column it is a number all same size and if I run this query in the production in ensemble it takes for ever the production finishes without getting the response back. The same query run in cache outside the ensemble environment writing results to a file it returns results taking about 3minutes to complete. But if I load the results into  a list or

Are there any good application cases for text analysis in the medical field, such as doctors’ cases?

When I log in to the management portal page, I want to know where to verify whether the user name and password information I entered are correct, and how to handle it in the program. Is it handled through routine? Or is there a Dispatch Class to handle?

We are on 2019.1 HealthShare Ensemble.  Has anyone upgraded from 2019.x to an IRIS version?  What was beneficial and the functionality you wanted and gained from the IRIS version.  How long was your downtime?

Hi,

I was tring to figure out the correct way of using action code = c under <Encounter>, but havn't got much progress. Here is what I tested and observed:

Quote from the class reference doc: 
D = Delete this Encounter and any other Streamlets linked to it via EncounterNumber
C = Clear all Encounters for this Patient and any other Streamlets linked to them via EncounterNumber

We have a situation where we want to save the patient photo (or any other attachment) received via FHIR to a persistent property without decoding it. When it is sent out again using FHIR is is stored in the encoded format and need not be encoded. We do not need to decode it for our application. We always use it on another system that retrieves it or saves it via FHIR and therefore it is always received or sent embedded in JSON.

I am experiencing a problem with an EDI process that uses a SQL Batch Service to connect to our DEV environment.  However, when we point the EDI service to our TEST server, it errors out.

I have checked every single property on our TEST and DEV servers as well as the properties on the associated tables.  They are identical.  Nothing has changed in the SQL either. 

Hi,

I'm trying to establish a communication between my edge, which is in one server, with my HUB which is in another one. 
In EDGE, when the HS.Gateway.HSWS.WebServices component sends a message to the HUB component, it receives the following error: "Cannot invoke method RegisterGateway; WebServiceClientClass 'HS.Hub.HSWS.WebServicesClient' could not be instantiated, or the WebServiceURL Location could not be determined".
 

May someone help me? 
 

Trying to map two repeatable fields from a record mapper.  The fields are separated by a ^.  I've tried a fore each, but still getting an error when testing in the transform.   

How can i access the model Patient class file from org.hl7.fhir.dstu3.model jar in spring boot

Hello community,

I'm running SQL reports on some HL7 messages and need to report the raw content of both the outbound message and the ACK response.

Hi, 

I want to edit the the Master viewer /source UI of  HealthShare Provider Directory with a property/ element of String type. 

There are predefined CodeTables structure by which i can't add the Attributes of the above element because somehow above element attributes are different than the code Table structures . 

Can we add a new Customize Code Table other than predefiend Code tables in the HealthShare Provider Directory ? 

Is there any way or any tutorial by which we can edit the Master Viewer  ?  

I am new to CCDs and I have a question for you all.

I need to take in a CCD from our EMR, filter out sensitive data then send it on as a CCD.

All feedback is appreciated.

Thanks

Hi

Has anyone implemented the message bank functionality in particular in the UK and if so what are your experiences of it in particular for custom messages? We are thinking of using it as our long term store and would like any feedback on it. We use a mix of REST web services, custom messages, HL7v2 and FHIR messaging within the Health area (NHS Trust to be exact).

I would also be interested in which version you implemented this upon.

Thanks

Ian

Does anyone have a tool or standard to anonymize CCDAs?

I have edited the Clinical Viewer portal. 

I made a new timeline with Patient Encounters. Did this using a external javascript outside Zen Component used for current chartbook.

So, i need to call function inside Zen Component. When i choose any encounter in current timeline is invoked a function, is name is SelectOneEp(' PatientID HERE ',''), i need help how to invoke this method in Zen Component estructure.

I already did the call from external JavaScript.

Hi, 

We have a system that gives an AE 'Error' response for warnings, that we want to transform to AA codes when returning the Application ACK.

MSH|^~\&|iCS|EHT|EPRO|R1K|20180511113136||ACK^A02|fbwZaoKW/USAdFI3IGLU|P|2.3|||AL|NE|
MSA|AE|fbwZaoKW/USAdFI3IGLU||||0^Nothing To Update^^W
ERR|||0^Nothing To Update|W|

Fortunately they include a warning code in MSA:6.4 and ERR:4

Does HealthShare have inbuilt functionality to transform Application ACK's, or do we need to build a custom BPL or class to handle this?

Kind regards, 

Stephen

Hi,

Are the HL7 UK specific ZU segment structures available for Healthshare?

I can obviously do them by hand, but it would save time if the structures were available in HealthShare as a starting point for interfraces that use them (our PAS 'ICS' uses ZU1,2 & 4)

Kind regards, 

Stephen

We have a program set up in the HealthShare Facility Registry. And we have some patients enrolled into this program. In the HealthShare Registry management, we set up following consent policy for this facility (we call it program), Default Block Except: Block data except for the groups specified below, unless overridden by patient. There is no program in the Selected Programs so the consent should be applied to everybody. This policy will block the patient search for the patients under this program in Clinical Viewer, ie, the patient search will not return the MRN belongs to this

I've written several custom classes to add additional search capabilities to the user / clinician search defined in HS.UI.Registry.User.Find. I've tested it out, and it looks and works how I'd like it to, but I've run into a snag when trying to implement it.

The documentation for registering custom user interface pages shows a table of about 50 configuration registry keys for UI pages, but it only lists:

• \UI\Registry\User\Add
• \UI\Registry\User\Home
• \UI\Registry\User\Individual
• \UI\Registry\User\Manage

I'm looking for guidance on how best to normalize Height and Weight values to standard units. For example, to accept height as Feet/Inches, Inches, and Centimeters from various sources, but always display Feet/Inches in Clinical Viewer, etc.

If anyone has done this before, please share details of how it was implemented. Things I'd be specifically interested in:

In the class HS.Util.Zip.Operations the OnInit method does a get value for ZipUtility, ZipCommand, UnZipCommand.

What is not clear in documentation is where/how those key/values are set.  Any assistance would be appreciated.

Hi all,

I have a rule to throw a message when there is an error. I want to prevent send the email if the origin of the error is the API to send the email

This is my rule

Now, If there is any error in any process, it works, but if there is an error in MyProduct.BO.SendEmail it is trying to send the error again, and it is a infinite loop.

Is there any way to check what is the origin and don't process if the origin is MyProduct.BO.SendEmail?

I've tried to set a condition in when node but it doesn't catch any property of Ens.AlertRequest

Hi ,

Can anyone share some good sample custom CCR Utility classes that would be called by ImplementCCR routines / CCR event hooks to help bootstrap a HealthShare (2020.1) environment or specific change?

Thanks,
Paul

Hello CCR Community,

InterSystems Certification is developing a certification exam for CCR and, if you match the exam candidate description given below, we would like you to beta test the exam. We anticipate the exam being available for beta testing on February 7, 2022, but interested beta testers should sign up now by emailing certification@intersystems.com. The beta testing must be completed by March 31, 2022.

What are my responsibilities as a beta tester?

InterSystems has corrected a defect that can result in an SQL query returning incorrect results.

This defect exists only in the 2021.2 (Continuous Delivery) version of:

            InterSystems IRIS Data Platform

            InterSystems IRIS for Health

            HealthShare Health Connect

InterSystems has replaced existing distributions of these products with new builds that correct the defect. The corrected distributions can be identified by the build number (651) and are available via normal means. Ad Hoc corrections are not available for Continuous Delivery (CD) distributions.

I was wondering if there was a certain procedure or documentation on securing (Https://) the Web Portal into IRIS/Ensemble?

Currently we are using LDAP Delegated Authentication to access the Web Portal using LDAP. However as more and more emphasis is put on securing applications within networks, I can see Management/Security asking us to make sure that the web portal is more secure.

Maybe I am not looking at the right place for documentation, but is there a Best Practice guide, set of instructions, or Online learning that can help guide me in trying to make our environment more secure?

Seeking opportunities either remote or local to Massachusetts for an experienced HealthConnect developer.

Have experience in transaction HL7 messages, mostly ADT and Results.  Developing rules, transforms and message schemas.