Hi

We have Edge Production where we uploading flat files clinical data, and during testing we do this for several rounds load data, test them and reload them. So everytime we have to generate differnet patient data or change MRNs etc. So request is is there a command to delete patient records that will remove from the tables, and delete reference in the registery as well.

Any guidance that you follow for testing backload data and delete loaded data, pls share

0 1
0 494

We are using the out-of-the-box IHE components to exchange CCDs with an external system. A requirement to audit the outbound CCDs has arisen.

Is there an existing report that will show these ? If not, how can we audit these?

Thank you for reading

0 1
0 160

Any suggestions on a way to indicate when a patient encounter is in an ‘Observation’ status** in Clinical Viewer? Clients would like to be able to distinguish between true ‘Inpatient’ or ‘Emergency’ status and ‘Observation,’ especially given that encounters often cycle between various statuses.

0 1
2 156
Question
· Nov 30, 2023
Multitransformations of HL7

This question originally appeared in the comments of the post: Making use of Multiple Sub Transforms in a main map || HL7

I'm having a similar problem trying to get PRD(1) into PV1:ReferingDoctor and PRD(2) into PV1:ConsultingDoc

Running the subtransform will populate referring doctor for the first PRD, and then the second running will delete the PV1, make a new one with only the consulting doctor populated.

0 1
0 122

Hello. New to the forum and was hoping I could get some expert help here. I have one data set that is using CHD Logic to combine Procedure and Diagnosis codes to define Sensitive data and flag the record for additional protected filtering. The files coming in define what is flagged and the Clinical Info Rule and Clinical Info Type are tied to the flag in the file which identifies it as a additional protected record.

0 1
0 386

Hello,

I am interested in working with a third-party API in my instance of the Community Portal. I was curious as to how you all work with third-party apis. Do you typically connect directly from within a ZEN Mojo Page or do you route the request through an operation in the management portal? Are there any sort of best practices I should be aware of?

Thanks,

Bob

0 1
0 304

Hi,

I'm trying to establish a communication between my edge, which is in one server, with my HUB which is in another one.
In EDGE, when the HS.Gateway.HSWS.WebServices component sends a message to the HUB component, it receives the following error: "Cannot invoke method RegisterGateway; WebServiceClientClass 'HS.Hub.HSWS.WebServicesClient' could not be instantiated, or the WebServiceURL Location could not be determined".

May someone help me?

0 1
0 381

Hello there,

Someone know which impact would have my database changing the locale and its collationTable? I understand it should works fine, without any drawback.

Could someone else confirm my assumption or tell me what could happen? Has anyone changed something like that? (Not to russian, japanese, chinese, etc..)

About queries.. is there any side effect?

Regards

0 1
0 164

I have a SQL query that I want to run against MS SQL from cache ensemble using the SQL outbound adapter. If I run this query direct from MS SQL Studio it take about 7 seconds MAX and returns about half a million rows. The row only contains one column it is a number all same size and if I run this query in the production in ensemble it takes for ever the production finishes without getting the response back. The same query run in cache outside the ensemble environment writing results to a file it returns results taking about 3minutes to complete.

0 1
0 246

I've poked through the class documentation and globals and I can't seem to find what I'm looking for, namely a mechanism that will give me the PropName key and value for each of the Items in an EnsLib.HL7.SearchTable definition. Is there some sort of query that will turn the list of Items in the XData SearchSpec section into a key/value pair of some sort?

For example:

0 1
0 198
Question
· Aug 15, 2021
Post Deployment Support

Hello,

Does anyone know if intersystems has a support document/ support guide on "Healthshare"? We need to share it with our L1 support team.

Any support document with a few known issues with their resolution, that the L1 team can expect and resolve?

0 1
0 130

Hi:

Had an issue after upgrading to 2021.1 where search bar for interoability will bring up "INVALID ACTION".

On upgrading to 2022.1 this still occurs.

It did not occur on another environement that was upgraded from 2017.2 straight to 2022.1

Is there any solution? Loads up SYS in url rather than customnamespacename

Issue is the url for instance brings through ip/csp/sys/EnsPortal.DTLEditor.zen?$NAMESPACE=X

0 1
0 250
Question
· Dec 4, 2023
Custom Application Metric

I made a custom application metric, imported it to the USER namespace and used:

set status = ##class(SYS.Monitor.SAM.Config).Add.ApplicationClass("historymonitor.errorSensor", "USER")

to add it. When I do 'w status' it returns 1 so it is added but I still can't see the custom metric in the api/monitor/metrics endpoint. Even though I added %DB_USER in the application roles for api/monitor.

Does anyone know where the problem might be that the metrics endpoint still doesn't show my metric?

0 1
0 114

I've written several custom classes to add additional search capabilities to the user / clinician search defined in HS.UI.Registry.User.Find. I've tested it out, and it looks and works how I'd like it to, but I've run into a snag when trying to implement it.

The documentation for registering custom user interface pages shows a table of about 50 configuration registry keys for UI pages, but it only lists:

0 1
0 414

My main goal is to be able to create reports and alerts in my SIEM based on what individual searched for and accessed what patient records, and when.

Does anybody have any experience with this? I've been ingesting audit logs in to Splunk but I'm having a hard time getting useful data.

0 1
0 385
Question
· Feb 1, 2019
Message Bank Usage

Hi

Has anyone implemented the message bank functionality in particular in the UK and if so what are your experiences of it in particular for custom messages? We are thinking of using it as our long term store and would like any feedback on it. We use a mix of REST web services, custom messages, HL7v2 and FHIR messaging within the Health area (NHS Trust to be exact).

I would also be interested in which version you implemented this upon.

Thanks

Ian

0 1
0 294

Hi,

While HL7 Errors ACKs come back in the soap response, the HL7v2 Error ACK message is not processed.

I used the SOAP Wizard to construct my classes, but the generated code doesn't handle the HL7v2 ACK.
Does health Connect have a class that handles this?

Failing an official solution should I go ahead and make make my own classes based on EnsLib.HL7.Operation.TCPOperation, but wrapping it with the generated SOAP handling code.

How have others dealt with this?

0 1
0 352

Hi all,

I'm trying to output a XML file, mapped from a ORU_R01 2.3 HL7 message, with a file name based of fields in the source HL7 message in the following format,

source.{PIDgrpgrp(1).PIDgrp.PID:PatientIDInternalID(1).ID}_"-"_
source.{PIDgrpgrp(1).PIDgrp.PV1grp.PV1:VisitNumber.ID}_"-"_
source.{PIDgrpgrp(1).ORCgrp(1).OBR:ObservationDateTime.timeofanevent}

To give something like RXR0000000-000000123-20211125105415.xml as the output filename,

0 1
0 311