#HealthShare

I need to post data to an api which expects certain data in body, query, path and header. I am using Post method of %Net.HttpRequest class. I was able to set body and header values, but couldn't figure out how to set the query and path variables. Appreciate any assistance! Is it the SetParam method()?

http://servername/api/get/?param1=true

Does Intersystems Ensemble support (for LGBTQ+) gender code "U" in Healtshare? Specifically for the clinical (or physician) viewer?

Test shows the gender code is consumed without error and stored, but the viewer does not present it except (as far as I can see) in the patient search drop-down.

The 2.3.1 HL7 ADT schema code table lists "U" as a supported option.

Would this require customization in the viewer code to support this?

I'm looking for options to create multiple DFT HL7 messages based on data contained in a ZCO segment in a single inbound DFT message.  I have the following ZCO segment:

ZCO|CCC^Charge Code|1306794,1071301,23510,1071424|MFCD^Charge Code|14232,3542|||||

In this example, I need to create a new DFT message based on the data contained in ZCO:2.  Each code needs to be in it's own DFT message and put in FT1:7.1.  The number of codes will vary for each inbound message, but each code will need to create its own outbound message to the client.
 

Good morning,

I have another question regarding batch files and Ensemble/Healthshare. Is it possible for a batch file to check the status of the mirror monitor and return it as a status or value?

At present, we store the name of the instance in an echo and reference that. In the event we have to use a different echo, is it possible to have that in a different variable at all?

I hope this makes sense. If I can provide any other information please do let me know.

Kind regards, Alexi Demetriou

Hi,

I'm in the process of trying to convert my team to a Git-based workflow for source code version management (we use Ensemble and HealthShare, but build a lot of customizations on top). We are having a hard time working with Atelier in this regard for a few reasons:

• Atelier always wants to sync the local files with the Cache server files, so switching between git branches causes all sorts of mayhem with the synchronization. Creating new files locally leads to a similar problem.

The preview release of InterSystems HealthShare Health Connect 2019.1 is now available!

Kits and container images are available via WRC's preview download site.

InterSystems HealthShare Health Connect version 2019.

Hello;

I have created an App launch to my FHIR app in the sandbox and am able to access Patients that are provided in the Sandbox. Having done this, I would now like to upload a  test patient in a FHIR bundle to the sandbox, however I have not been able to find out how I can do this.

Can you provide some direction/tools that I can use to upload my bundle to the sandbox?

Thanks

-Rand

I would like to know if there is a built in function that checks a value in the rule editor to see if it is numeric.

I loaded 2017.2 onto a windows desktop that I was going to use for testing. I need to now uninstall 2017.2 but when I do I get a ERROR saying it can not find the INSTANCE name, when there is HEALTHSHARE defined.

Has anyone else had this issue? I would like to uninstall this version and start over from scratch without having to re-image my machine.

Thanks

Scott

Is there any good documentation/tutorials on creating gateways in both directions between FHIR and Hl7v2 (for Health Connect)?

the scenarios I'm most interested in

1. Client application sends a FHIR demographic query to Health Connect - and the interface has to convert this to Hl7v2 QBP^Q11 message to the PAS.

2. Health connect sends a PDF document (from a file or HL7v2 interface) to an EPR over FHIR.

Thanks

Stephen

UPDATE

We are using Health Connect  15.03 - Cache for Windows (x86-64) 2017.2.1 (Build 801U) Wed Dec 6 2017 09:07:51 EST [HealthShare Modules:Core:15.03.9901 + Linkage Engine:15.03.

How to use remote database in Healthshare , can anyone suggest steps to connect remote database into our local namespace.

I am new to InterSystems.

I have set up a simple application in HealthShare.

Name: /testwebapp
CSP Files Physical Path: /Users/lakinducker/Documents/Dev/testwebapp/dist/testwebapp
In that directory are the following:
index.html
styles.3bb2a9d4949b7dc120a9.css
polyfills.c6871e56cb80756a5498.js
main.4ba7035983a7e3311083.js
runtime.ec2944dd8b20ec099bf3.js
favicon.ico
3rdpartylicenses.txt
If I go to http://localhost:57772/testwebapp, I get "Not found".
If I go to http://localhost:57772/testwebapp/index.html, I get the index.html file.

Hello, I need help in health insight. I am trying to generate reports on deep see but i am not able to pull in the patient ids as these are our requirements for the project. Can anyone help me in unlocking this feature. Can anyone help me with link to correct documentation on how to access the edge gateways of multiple facilities to access the clinical data on sql explorer.

Hi everyone! My name is Bruno Soares and I work with HealthShare. I have one question and would be very grateful if someone help me. Can somebody tell me where HealthShare parameters weight came from? Thank you all. 

Hi,

I need to create a role that is able to monitor the production, but isn't allowed to shut down the production or individual services.

Is there a particular resource that is allowed to do this, so I can remove it?

Any help is appreciated. 

Joost

I am currently using InterSystems for patients data management related to intake treatment planning and delivery of dose.

should I create a new attribute to track Patient ID or using an existing attribute within Audit log ? what are the good practices guidelines?

If I use Event Data field to record Patient_ID is it possible out of the box to search entries for a specific Patient_ID ?

Hi,

Any idea how to reference Header and Body properties of a message in a Routing rule?

I know how to address HL7 and AlertText – but I don’t know how to reference Header and Body properties directly!

(I want to do this because addressing properties directly is quicker than searching the text of the message.)

KR

Stephen

HealShare 2017

Hi dev community,

I am currently  working on an interface that needs to communicate to a SOAP/ITK endpoint.

I am using the EnsLib.ITK.AdapterKit.Operation.SOAPOperation to interface with an ITK 
service, but it is proving to be more complex than originally expected to set up the web client 
against that particular end-point since I haven't been provided with a WSDL from ITK service side as 
the vendor state they are following the ITK standard and no WSDLs are needed.

I have set up an EnsLib.ITK.AdapterKit.Operation.

My main goal is to be able to create reports and alerts in my SIEM based on what individual searched for and accessed what patient records, and when.

Does anybody have any experience with this? I've been ingesting audit logs in to Splunk but I'm having a hard time getting useful data.

I looking to gain insight on if I can trigger a SMS text to a Clinician

New to HealthShare and trying to get the process for setting up a message.

Simple use case

Alert a Clinician if a patient meets specific requirements via an SMS text message.

I have set up a test physician in our dev environment, and enabled push notification on the Edges fro the MPI update manager.

Based off of the HEPUSH documentation.

Any direction to documentation or steps is greatly appreciated.

Thanks,

I just downloaded and installed the latest WebTerminal into my local copy of Healthshare 2016.2.1

I installed via studio and everything compiled without error.

However when I run it I just see a black screen. The help window at the bottom of the screen pops open when I type '/' but I just can't get any response.

Any suggestions as to how to trouble shoot this?

Mike

Hello,

I'm wondering what the path is to learning healthshare & ensemble?   I've looked on the learning page and its minimally helpful.   I've found that as a long time mumps programmer that new jobs are requiring this.  I've just been using mumps to assist with epic emr.   Everything I'm seeing is either VistA or Healthshare.  Does someone know where do I go to learn these apps?  Seems like a catch 22.  You need to know these prior to getting a job but you can't get a job where you can learn them.    Frustrating.

Newbie question.

We have a desire to leverage apigee to do a call to our MPI system. 

Not sure if this is something we can do via HealthShare.

Anyone doing a soap request or restful call from InterSystems through Apigee? 

If I am overlooking the obvious (documentation) any guidance is greatly appreciated.

Thanks in advance

Hi everyone,

I need submit a object have a json string as property of class, but I get an issue, object can't save to SQL table if I take json data to json property. I try making a test class with only json property and get the same issue, no data row in SQL table after run ClassMethod . Some one know what's problem, please help me. Here my test class:

Hi I'm just trying to make sure I'm not missing a trick here.

Basically our PAS doesn't do hl7 messages but does some XML which you can create. So I'm just trying to create some xml files and then get healthshare/ensemble to parse them and to process accordingly. 

I'm getting some good results doing this. But maybe I've got a small hitch. In each of my xml files I've the data for the patient/client. 

Then in the xml schema which I've imported I've specified the elements.

Hi,

Can I reference the 'request' object when setting default values for context variables?

Hi,

I have a routing rule that calls some utility classmethods, but for some reason the compiled version insists on linking to a utility function in a different package.

The call to 'SendToEaling(HL7)' in  isn't compiling to a call to the LNWTIEPackage as expected:

##class(LNWTIEPackage.RoutingRules.Utility).SendToEaling((pContext.HL7))

but is instead becoming a call to the LNWDeploy package

##class(LNWDeployRoutingRules.Utility).SendToEaling((pContext.

I already talked about GraphQL and the ways of using it in this article. Now I am going to tell you about the tasks I was facing and the results that I managed to achieve in the process of implementing GraphQL for InterSystems platforms.

What this article is about

• Generation of an AST for a GraphQL request and its validation
• Generation of documentation
• Generation of a response in the JSON format

The same piece of data never throws this error on other operations. I am getting this error on one always .

The same SDA container never throws error on other operation.

ERROR #6901: XSLT XML Transformer Error: SAXParseException: invalid character 0x1C (Occurred in an unknown entity)

Set xslt=##class(%Dictionary.XDataDefinition).%OpenId(..%ClassName(1)_"||Xmethod",-1,.tStatus)
$$$ThrowOnError(tStatus)
Set tStatus= ##class(%XML.XSLT.Transformer).TransformStream(myStream,xslt.Data,.OpStream)
$$$ThrowOnError(tStatus)

XData Xmethod
{

For Global Summit 2016, I set out to showcase a Reference Architecture I had been working on for a National Provider Directory solution with State Level Instances and a National Instance all running HealthShare Provider Directory and all running on AWS Infrastructure.

In short, I wanted to highlight:

• The implementation of Amazon Web Services to provision the infrastructure, including the auto-creation of the state level instances through Cloud Formation.
• The use of the HSPD Broadcast functionality to Notify Upstream Systems Changes in Master Provider Data.
• The implementation of a transformation of the standard Broadcast Object to HL7 MFN for interoperability.
• The principals of Master Data Management applied to the Provider Directory.