#Caché

Until what version of HTML and CSS can I use on zen pages? 

i have a problem with CSP files, i can create a CSP file with termination ".csp" or ".CSP" and this configuration is case sensitive, but a CLS file, this configuration is not case sensitive. there is a way i can change this to the CSP file don't be case sensitive?

First of all thank you for your time in reading this question and writing a response,

We would need some help,

What is the best method for save a %CSP.BinaryStream to a file?

Thank you in advance!! 

Hi,

When I'm using Cache Studio and save and compile some .cls file, it automatically generates the .xml file:

How can I have the same behavior in Vscode, when I use the export command:

This are my Vscode configs:

any help will be most welcome

thank you

Hi!

I am making a request to an API and JSON is coming as follows:
SET %httprequest = ##class(%Net.HttpRequest).%New()
DO %httprequest.Get(URL)
SET %responseBody = %httprequest.HttpResponse.Data.Read()
 

W %responseBody
{produto:"CHP0001",Local:{IDMV: "000000001",LOTE: "",DtFabric: "null",DtVenc: "null",Atributo06: "0000000002",Atributo07: "",QtdeDisp: "10.00000",QtdeAloc: "0.00000",QtdeSep: "0.00000",QtdeTotal: "10.

Migration from Caché to IRIS can be quite a challenge if your code is grown over many years
and probably not so clean structured as you may like it. So you face the need to check your
migrated code against some reference data. A few samples might not be a problem,
but some hundred GB of data for testing might be.  

A possible step could be to have your fresh code in IRIS but leave your huge datastore on Caché and connect both environments over ECP.  I have created a demo project that gives you the opportunity to try this based on 2 Docker images with IRIS and with Caché connected over ECP.

Why when I use a SQL on the Cache, the condition between "the expression" and "the expression", not permite to me, delete the all ID of this data class?

What are the differences between Cache for Windows and Cache for MacOS?

I want to use it in different devices.

Accuracy rate is a measure of our prediction results, and it is a measure of how many of the predicted positive samples are actually positive.
The recall rate is for our original sample, and it shows how many positive examples in the sample were correctly predicted.
Accuracy = Predicted correctly/All
If we want to be able to retrieve as much content as possible, this is the pursuit of "recall ratio", namely A/(A+C), the bigger the better.

Getting this error when starting up Caché: 

I've recently deleted several Caché namespaces to clear up space, turned Caché off, and then this started happening. Caché cube is grey, but only the start Caché option is unavailable. 

Caché is still running, but just not completely:

The Windows Event Viewer application has the following error: 

There are also the following logs in the mgr/cconsole.log file. I can provide more if necessary. 

03/03/21-14:18:23:206 (13360) 0 START: C:\InterSystems\Cache\mgr\journal\20210303.

I have 2 instances of Cache, one of 2010 and the other 2016.  On both I have created a SSL Configuration with same name.

When I connect to a SOAP Service Client from Cache 2010, I get the above error.

If I connect from Cache 2016, the connection get through.

How can get more details of the error in the Cache 2010 instance to be able to fix this issue.

I have enabled the SOAP Log and it does not give much of details.

Regards

Anil

Just curious if anyone tried to use HTTP/2 in their Caché projects?

And InterSystems thoughts about adding support for this new version.

Hi Community,

is there a possibility to implement a "remember password" feature in a ZEN Application?

In the management portal I added a web-application for a ZEN application with password authentification. I created an own login page, and now I want to implement a "remember password" feature (User should not have to login again after the session times out or when the browser window is closed).

Hi 

I am using below function and it works fine but i want to match the value ignoring the first 4 chars as they are only added to sort the data.

##class(Ens.Rule.FunctionSet).Lookup

For example

My table has following values

0001EMRNameB

0002EMRNameA

0003EMRNameC

w ^Ens.LookupTable("EMRName","0002EMRNameA") this works 

But i want to use something like that

w ^(Ens.LookupTable("EMRName","%EMRNameA") this doesnt works 

Does anyone know how to get the closing tab/menu changing event in a CSP? I've tried the JS "OnBeforeUnload" already but it seems the browsers aren't allowing it anymore. I need to show a pop-up that holds the user if trying to get away before completing the stage.

Hi all,

I have a API operation that is calling to a external process. The answer is a big json but I only want a pice of the full content.

My first attempt is:

.....
// The code of prepare the request is omitted.
set tSC = ..Adapter.SendFormDataArray(.tHttpResponse,"POST",tHttpRequest,,,tURL)
if $$$ISERR(tSC) $$$ThrowStatus(tSC)
// Get the response directly
set response = ""
while (tHttpResponse.Data.AtEnd = 0) {
    set response = respuesta_tHttpResponse.Data.Read()
}
// Convert Json to generic object, get the node returnValue.data and convert to JSon again

InterSystems has identified an issue with product distributions containing Certificate Authority certificates that expire at the end of 2020. This issue does not affect system operation or system security in any way, although it does generate alerts about expiring certificates in the cconsole.log or messages.log files. The messages may be ignored and there are instructions below to eliminate them.

The issue affects the following versions:

• Caché and Ensemble 2017.1, 2017.2, and 2018.

We would need some help,

Thanks in advance for your replies,

We can POST directly via POSTMAN only if we disable "SSL certificate verification"

We see the response:

However if we turn on "SSL certificate verification" it shows:

So, when we use Ensemble and a REST Operation, it outputs:

ERROR <Ens>ErrException: <THROW>zdoLoginToken+22^Operaciones.REST.HistoriaClinica.VacunasAPI.1 *%Exception.StatusException ERROR <Ens>ErrHTTPStatus: Recibido estado no correcto 403 del servidor HTTP remoto: 'HTTP/1.1 403 Forbidden' -- - registrado como '-' número - @' Set sc=tSC Throw:('sc) ##class(%Exception.

Currently in Visual Studio Code when we connect to a Cache server and export the CLS and MAC files, they get placed in the following:

\Comp;anyName\src\Packages

Where the Packages folder corresponds to the different class packages we have. The MAC files are placed in the src folder and not contained in it's own folder.

Is there a way to configure the export for the MAC files so that it's contained in it's own folder like this:

\CompanyName\src\mac

Thanks in advance for your help.

-Roberto

Hi,

I am wanting to get the results of SYS.Database class's List query into a result set.

I have code that does it, but I get a cursor error at the end.... should I just to a try/catch and ignore this error below?  Or can I call this in a different way to avoid the error?  
My code, in the %SYS namespace
Set Statement=##class(%SQL.Statement).%New()
Set status=Statement.%PrepareClassQuery("SYS.Database","List")

Set rset=Statement.%Execute()
//
while (rset.%Next())
{
        W !,rset.%Get("Directory"),?30,rset.%Get("Size"),?40,rset.%Get("MaxSize")
}

Since some months ago we automatized source code analysis for projects on Github, so anyone with an open source project can have its code analyzed with no cost.

You only need to create the file ".github/workflows/objectscript-quality.yml" in your project with following contents:

name: objectscriptquality
on: push

jobs:
  linux:
    name: Linux build
    runs-on: ubuntu-latest

    steps:
    - name: Execute ObjectScript Quality Analysis
      run: wget https://raw.githubusercontent.com/litesolutions/objectscriptquality-jenkins-integration/master/iris-community-hook.sh && sh .

Hello everyone,

I have an issue with using "Open" function.

My goal is to execute a shell script with parameters like as:

/trak/FRXX/config/shells/transportIDE.sh "login|password|NOMUSUEL|PRENOM|NOMDENAISSANCE|1234567891320|199999999999999999999999|09%2099%2099%2099%2099|31%2F12%2F1999|242%20IMPASSE%20DES%20MACHINCHOOOOOOOOSE%20||99999|SAINT%20BIDULETRUC%20DE%20MACHINCHOSE|isc%24jhu|123456|123456798"" 2>&1"

But when some parameters are too long, I have a <NAMEADD> error.

Hi -

I'm trying to figure out an elegant way to select a row on a table pane when I don't have an index, but I DO have a value.

My page has a typical tablePane (with a tableNavigator) which is being populated from a table of records, and the value for each row is the object instance ID for the class that has the rest of the columns being displayed. What I'm trying to do is add in a URL parameter for a targeted object ID that will populate the specific "fields" elsewhere on my page, which are the same fields that are populated when I do an onSelectedRow() from my tablePane.

Hi everybody,

Is there any functionality I could use that triggers real time user-defined code on certain audit events? Right now I am interested in triggering such code on a routine modification event, like the one below. I do know how to access this record programmatically, via %SYS.Audit.

Thanks in advance,
Anna

As a Belgian leader in developing and operating entertainment solutions in the sports betting and casino games sector, Bingoal is a dynamic and ambitious company looking for a passionate Back-End Software Engineer. Together with the IT team, you will be working to create scalable and easy to maintain software having an impact on the core of Bingoal’s activity.

We are looking for a developer with InterSystems ObjectScript Experience.

Hi,

So I am a front end developer working with REST API with Cache database on the BE. The BE guys are currently using Cache through a Windows virtual machine and they claim it is not possible to have a development server to work with. All the work they are doing is directly on the production server and changes are immediate and I think this is a bad idea going forward and we most definitely need a development server that has access to the same code base and different version (through git) to be able to do development. We also do all the testing on this production server with test accounts, but we cannot do automated testing with this setup.

I need another set of eyes to look at the following. Instead of a Data Lookup table, I wanted to try to lookup a value against a Cache table that I had build. So I thought I could write a function to run a simple SQL query against the Cache Table and return me a %Boolean value back to my routing rule. However today I found that it was not working properly.

Can someone take a look at the following method and verify that I am doing this correct?

I'm just clarifying that 2017.1 is viable on 8.4-1H1. can someone please confirm, also what kind of support would we receive if we upgraded to 8.4-2L1?  I know that 2015.2 works on it. yet it says it's not supported. 

we really need to get to 8.4-2L1.  any help would greatly be appreciated.

thanks

Paul

Two permanent job opportunities for Caché Developer/Programmers. Small company, remote positions. Offices located in Philadelphia and Ft. Myers, FL. Development team retiring in next two years. Looking for new team. Excellent benefits including stock options and work environment. Travel and financial services industries.

For further details, please send your CV to patrick.glynn@shelbyfinancialcorp.com