Syndicate content 0  
 

Hello,

I have a problem generating QR code in Caché now.

After executing the code

set Status=##Class(%SYS.QRCode).GenerateImage(P0,,.DataURI)

(variable P0 contains data for QR code)

an error is displayed now:

0 1
0 35

Hello my friends,

I have a problem with Objectscript, why the value of address become like this ?

everything works fine except the Address,

this is my code, do I need something to make this into real address ? should I put something in my code ?

set paper=obj.PAADMPAPMIDR.PAPMIPAPERDR

if '$isobject(paper) continue

set Address=paper.PAPERStName

thank you for your help

Best Regards,

0 3
0 34

I'm trying to gather more data for one of my namespaces so I can do some analysis. However when I run .BuildIndex() nothing populates in the resulting SQL table. I've tried deleting the class and reimporting and compiling and still nothing. I feel like I'm doing something OBVIOUS that's wrong but I can't quite figure out what it is. Here's what I'm doing (Customer name redacted)


0 3
0 34

Hi everyone,

I’ve set up a scheduled task in InterSystems IRIS to run every night at 2:00 AM, but it doesn’t seem to trigger consistently. Some nights it works as expected, but other times it just skips without any error in the logs.

The task is marked as enabled, and there are no conflicts in the Task Manager. I’ve double-checked the system time and time zone settings all looks fine.

0 1
0 32

Hi,

I'm trying to install NodeJs (javascript runtime environment) in IRIS container so I can execute JS files?
It was easy to install it outside the container but I got the attached error when trying in the container:

Thanks

1 1
0 32

When accessing management portal through IIS the page is not fully rendered and the buttons/links that are displayed don't work.

Management Portal works fine through private web-server.

Have just set up IIS/CSP Gateway to access Ensemble, and accessing the CSP Gateway configuration pages through IIS works fine (screenshot at end of post).

This is the view when accessing management portal through IIS (port 80) - missing images, links don't work, not all content displayed:

0 2
0 32

Good day

I am trying to connect a business service to fileZilla using FTP on my local PC Win 11.

I am trying to setup my training after attending the Building HL7 interfaces course with ISC.

The connection is failing. He is the error below

ERROR <Ens>ErrOutConnectFailed: FTP Connect failed for localhost:21//SSL=' with error ERROR <Ens>ErrFTPConnectFailed: FTP: Failed to connect to server 'localhost:21//SSL='/' (msg='Missing required argument',code=501)

0 1
0 31

The below code is not working. its unable retrieve Record count and merge files

Class Util

{

ClassMethod zPyRecordCount(inputfile) As %Integer [ Language = python ]

{

import pandas as pd

import iris

import io

try:

df = pd.read_csv(inputfile, sep='|')

recordcount=len(df.index)

sys.stdout.write(len(df.index))

return recordcount

except Exception as e:

return 0

}

0 2
0 30

I'm running the image "containers.intersystems.com/intersystems/irishealth-community:2025.1" as a container on my local Docker desktop.

Now I want to set up an ODBC SQL connection, but I don't know how to do it.

I have tried various ways without success. Like building my own image (see "Dockerfile" description below).

I have also added ODBCINI variable in my docker-compse (see "Docker-compose.yml" description below).

Anyone done this before?

I'd really appreciate some help.

Thanks.

0 1
1 29

All,

At READY 2025 we will have a CCR User Group Breakfast for HealthShare and TrakCare customers on Wednesday at 7:30am (presentation starts at 7:45am). Topics will include:

  • Review of Self Service Best Practice Dashboard
  • Recent CCR New Features and Enhancements
  • Active CCR Feature Beta Programs
  • Summer and Fall Roadmap
  • Q&A

We will meet in the Jackson meeting room. Visit the Meeting Counter to have it added to your schedule or comment below to request an invite.

2 0
0 28

I was wondering if anyone had a way to automate creating the Query String for a FHIR Request?

Using HS.FHIRServer.Interop.Request in my development I have to specify the following...

I was wondering.... if my source had variable number of fields if there was a way to automate the build for the QueryString when doing a Patient Search?

1 0
0 27
Contestant

#InterSystems Demo Games entry

⏯️ FHIR-Powered AI Healthcare Assistant

Leverage InterSystems's FHIR SQL Builder to project FHIR data to a dataset for vector embedding, and feed the vector store to a RAG chain with LLM and Chatbot.

🗣 Presenter: @Simon Sha, Sales Architect, InterSystems

https://www.youtube.com/embed/P5JcdjLNvbc
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

3 0
0 27
Contestant

#InterSystems Demo Games entry

⏯️ Eliminating Waste in Healthcare Supply Chains

Between recalled supplies, expired inventory, and rogue spending, an estimated $25 billion per year goes to waste in healthcare supply chains. We know how critical supply chain is in healthcare, so we know this is a problem worth solving! What could a proposed solution look like? Watch and find out!

Presenters:
🗣 @Georgia Gans, Sales Engineer, InterSystems
🗣 @Annie Tong, Sales Engineer, InterSystems
🗣 @Boris Mamkin, Senior Sales Engineer, InterSystems

https://www.youtube.com/embed/NOgKJ09k5O8
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

12 1
0 26

Hi Community,

Watch this video to learn about Shift's new Data Platform architecture, combined with the InterSystems IRIS roadmap for data management:

⏯ Shift Data Platform: The IRIS Roadmap Applied @ Global Summit 2024

https://www.youtube.com/embed/-kDYPsLqrzA
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

3 0
0 26

Thank you community for translating an earlier article into Portuguese.
Am returning the favor with a new release of Pattern Match Workbench demo app.

Added support for Portuguese.

The labels, buttons, feedback messages and help-text for user interface are updated.

Pattern Descriptions can be requested for the new language.

Open Exchange app
2 0
0 25

Hey Community!

We're happy to share the next video in the "Code to Care" series on our InterSystems Developers YouTube:

⏯ Chaining LLMs for Better Results using Agentic AI

https://www.youtube.com/embed/hAtuAIihBVA
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

0 0
1 23

Hi Community

I'm working on a complex piece of rules that needs to check each OBX and evaluate if 3 of the fields match certain criteria. I've tried to achieve this using a Foreach loop, which does work, however it is not as clean as I wanted it. I was hoping I could assign temp variables inside the foreach loop to make the rules more easier to read, for example @testCode @resultText. This is not support as you can only assign inside a when condition. Before I raise this as an idea, i wondered if there was an alternative way to achieve the same thing?

1 1
0 22

I am attempting to follow the tutorial at Publishing Web Services Using Caché | Caché Web Services QuickStart Tutorial | Caché & Ensemble 2018.1.4 – 2018.1.11 to build a toy SOAP web-service using Cache but am running into what I suspect are permissions issues, or perhaps setting up the "plumbing" to get an incoming request to call the web-service methods.

0 1
0 22

So I have been working in Healthcare Interops for about a month now and in IRIS. I am looking to implement SMART on FHIR and I am currently working to make an endpoint that works as the discovery endpoint. It is a custom dispatch class and unauthenticated is selected for access. I am trying to make a simple get request from Postman to test that the proper JSON is sent, but I receive a 403 Forbidden error. It is reaching IRIS it seems so I know its not a reverse proxy error. Here is an example of my custom Dispatch Class.

0 2
0 21

I am seeking work with InterSystems HealthConnect/Cache. My experience is working with Rules and DTLs, plus message search, and export of components.With 10 years of dedicated expertise in SOA and ESB platform development, I have successfully designed and implemented enterprise-level integration solutions for large organizations, driving significant improvements in system interoperability and business efficiency.I have actively developed and supported HL7 V2/V3 、FHIR、XML/JSON interfaces.I reside in China.

0 0
0 20

Hey Developers,

Enjoy the new video on InterSystems Developers YouTube from our Tech Video Challenge:

⏯ Message integration with Google Chat

https://www.youtube.com/embed/F3ZW7ojGcJM
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

2 0
0 20