Hi!

Does anyone have a cleaner approach than this for looping through grouped NTE segments in order to set the segment ID in an ORM? I am aiming to avoid the NTE segments that may follow the PID segment and find the NTE's that follow the OBR segment. By using the below If statement in the While loop, I'm finding NTE's that have comments in the fourth field (PID NTE's tend not to have these in the messaging I'm seeing, I'm awaiting confirmation on this), as well as finding my newly inserted NTE segment using $FIND to locate the colon (I've concatenated some values).

0 3
0 503
InterSystems Developer Community is a community of 22,914 amazing developers
We're a place where InterSystems IRIS programmers learn and share, stay up-to-date, grow together and have fun!
Learn more

Hello everyone,

I have a question and if you have some code, it would be lovely.

I had to create a connector which is biredictionnal. What does I mean by this?

I have to send ADT to an certain ip +port by TCP but I have to receive query A19 by this same ip+port.

Is it possible to create such a connector that can do both?

I read about pipe but i think it's too low-leveled .

Thanks,

Thomas

0 6
0 196
Question
· Jun 11, 2021
Parsing null values in JSON

Hello everyone,

I'm creating a REST API with InterSystems Ensemble.

I already have a POST route that parses JSON content into an object defined in a class.

To parse the JSON content, I'm using the JSONStreamToObject method in the Ens.Util.JSON class

Here is how I use it:

0 1
0 1.6K

Greetings

Reaching out the development community to understand if there is anybody out there whom have developed a financial transactional switch or stock exchange on Intersystems before. If so please DM me on +27 66 243 1618.

Many thanks and Regards

Johan Bosch - Founder and CEO

POLC Global

2 4
0 278

Challenges of real-time AI/ML computations

We will start from the examples that we faced as Data Science practice at InterSystems:

  • A “high-load” customer portal is integrated with an online recommendation system. The plan is to reconfigure promo campaigns at the level of the entire retail network (we will assume that instead of a “flat” promo campaign master there will be used a “segment-tactic” matrix). What will happen to the recommender mechanisms? What will happen to data feeds and updates into the recommender mechanisms (the volume of input data having increased 25000 times)? What will happen to recommendation rule generation setup (the need to reduce 1000 times the recommendation rule filtering threshold due to a thousandfold increase of the volume and “assortment” of the rules generated)?
  • An equipment health monitoring system uses “manual” data sample feeds. Now it is connected to a SCADA system that transmits thousands of process parameter readings each second. What will happen to the monitoring system (will it be able to handle equipment health monitoring on a second-by-second basis)? What will happen once the input data receives a new bloc of several hundreds of columns with data sensor readings recently implemented in the SCADA system (will it be necessary, and for how long, to shut down the monitoring system to integrate the new sensor data in the analysis)?
  • A complex of AI/ML mechanisms (recommendation, monitoring, forecasting) depend on each other’s results. How many man-hours will it take every month to adapt those AI/ML mechanisms’ functioning to changes in the input data? What is the overall “delay” in supporting business decision making by the AI/ML mechanisms (the refresh frequency of supporting information against the feed frequency of new input data)?

4 0
1 716

Fixing the terminology

A robot is not expected to be either huge or humanoid, or even material (in disagreement with Wikipedia, although the latter softens the initial definition in one paragraph and admits virtual form of a robot). A robot is an automate, from an algorithmic viewpoint, an automate for autonomous (algorithmic) execution of concrete tasks. A light detector that triggers street lights at night is a robot. An email software separating e-mails into “external” and “internal” is also a robot. Artificial intelligence (in an applied and narrow sense, Wikipedia interpreting it differently again) is algorithms for extracting dependencies from data. It will not execute any tasks on its own, for that one would need to implement it as concrete analytic processes (input data, plus models, plus output data, plus process control). The analytic process acting as an “artificial intelligence carrier” can be launched by a human or by a robot. It can be stopped by either of the two as well. And managed by any of them too.

6 0
0 363

Hey Community,

We are really looking for your feedback on a new offering - InterSystems FHIR Transformation Service.
It went live on AWS Marketplace where you can try it for free!

We launched a related challenge on GM where you can get points for giving it a try and a "thank you" prize to everyone who leaves feedback in comments to this post.

3 0
0 187
Question
· Jul 15, 2021
Parsing error

After calling an API with

Do request.Get("/api/address/listing")

Set data = {}.%FromJSON(request.HttpResponse.Data)

I get this error:

<THROW>%FromJSON+37^%Library.DynamicAbstractObject.1 *%Exception.General Premature end of data 12 Line 1 Offset 0

any clue what might be causing this?

0 9
0 679
Question
· Jul 20, 2021
Zen Report page number variable

I have a report that requires a different header block for the first page and another for subsequent pages.

Is there a way to direct a header page to another header page based on what the current page number is?

0 5
0 215

Hey Developers,

See how API management can simplify healthcare application development with FHIR:

⏯ FHIR API Management @ Virtual Summit 2020

https://www.youtube.com/embed/VfO-hLmRhB0
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

1 0
0 141
Discussion
· May 8, 2021
New to Learn Python

Hello I am in My 2nd year of Engineering, and want to learn Python Programing Language, Please suggest to me the best books and best online resources that will help me to learn the python language.

0 9
0 574
Question
· Jul 20, 2021
Caché and IRIS doubt

Hi,

I have two questions:

  • Does "everything" that's available on Caché it's available on IRIS too?
  • Does everything available on IRIS Windows version it's available on IRIS Linux version?
0 4
0 225

Hi! I am working on a project where I use record map to transform a flat file and split it into two output text file and in the future will need to split four output files.

I only want to use one target business operations instead of multiple. Is there a way to set the output file and the target folder path in my business process class?

Any advice on how I can achieve this or is this possible? Thanks!

0 5
0 511

Apologies if this isn't the correct forum but here goes..

I'm accessing an Intersystems database from MS SQL Server using Intersystems ODBC driver and using OPENQUERY statement to read metadata of tables using

SELECT * FROM OPENQUERY([<linked server name>], 'SELECT * FROM INFORMATION_SCHEMA.COLUMNS')

but I get an error message saying INFORMATION_SCHEMA.COLUMNS cannot be found.

Intersystems SQL documentation does reference this table so is there some other way to access this table or is it maybe a permissions issue?

0 3
0 739
Question
· Aug 2, 2020
Kafka Java Host

I'm trying to produce Kafka Message to Topic using Java Objects. I have build Business operation and Jar file and trying to execute. I'm getting following exception

Terminating Job 8316 / 'IrisKafkaProducer' with Status = ERROR #5046: Error executing java command 'init() returned: "ERROR #5034: Invalid status code structure ("java.sql.SQLException: [InterSystems IRIS JDBC] Communication link failure: Access Denied")"'. Java may not be installed correctly on your system., %QuitTask=

Getting following trace at Audit Database

1 12
0 568

When I'm asked questions about SQL, I like Intersystems staff at the WRC, generally ask about the Query Plan. My feeling is that even before you run a query you should examine the results of Show Plan to confirm that the code is going to give me the results in the manner I would expect. If I expect it to leverage an index and I see that it is not then I go back and look at what I might have done incorrectly and try to re-write the query to get the index behavior I'm looking for. To that end, there's a poll below to ask you if think moving the Show Plan button as the first button would be

0 0
0 176
Question
· Jul 13, 2021
Method return List of type

Good afternoon I am making a method of a class that I want to return a list of objects of another class that I have defined, example:

ClassMethod myMethod() As list of MyPackage.MyClass
{
}

But it gives me a syntax error, I try this and it works:

ClassMethod myMethod() As %ListOfObjects
{
}

But I would like to keep the typing.

Is there a way?

0 5
0 558