Using a Workflow Task within HealthShare Provider Directory, when a user clicks on Resubmit message within my Business Process, I check the status of the response. If the response is "Resend Message", I have my Business Process executing the following...

set tSC = ##class(Ens.MessageHeader).ResendDuplicatedMessage(context.SessionID)
 if$$$ISERR(tSC) $$$LOGSTATUS(tSC)

the context.SessionID is the Session ID of the message as it is being pass thru the Business Process. Does anyone see why that would not work off hand?

I am getting the following error periodically:

CP: Pausing users because the Write Daemon has not shown

Hello everyone.

I have a question regarding the priority when applying a default configuration.

I have several Business Services that use the same class, so I want them all to have a common "Schedule" configuration.

However, there's one that I don't want this default configuration applied to, so I've tried setting the Schedule value to empty for that element based on its name:

In this case, the elements that use the class Kurro.BS.SFTP.Marca have the default value "CargaFicheros".

However, one of the elements (Kurro.BS.SFTP.

I have an Embedded Python method, which is essentially a call to one third-party module.

Most of the time, the method takes <0.1 seconds to execute, but sometimes it takes 30 or 60 seconds.

The server is relatively idle (20-30% CPU load).

How can I debug this issue further? Ideally, I want to know where this library spends the time. The library is mainly Python code (it's boto3, so it's not a Python C API proxy library).

Hi,

Does IRIS have any support for paginating FHIR searches other than the standard next/prev links as defined in the FHIR spec?  For instance, some servers support an _offset or _skip parameter to allow for jumping to specific pages in a result set.  

Table of Contents

1. Introduction
2. Version Control
3. Exporting Classes
4. Exporting BI Analytics classes
5. Exporting globals

Introduction.

In this article, we'll cover a quick start to Git development with the InterSystems Developer Community and version control practices when working with IRIS InterSystems. We'll cover scenarios where we need to export Interoperability classes, globals, and analytics elements such as cubes and dashboards. These scenarios encompass key version control practices with IRIS.

To get started, you'll need:

1. Register and log in to GitHub
2. Be a member of the intersystems-community organization on Git

Getting started with IRIS InterSystems is very simple!

Hi Community,

Let's meet at the online meetup with the winners of the InterSystems "Bringing Ideas to Reality" Contest! It's a great opportunity to chat with the InterSystems experts team and our contestants.

Winners' demo included!

Date & Time: Thursday, December 18, 11:00 am EST | 5:00 pm CEST

Join us to learn more about winners' applications and to speak with our experts.

➡️ REGISTER TODAY

See you all at our virtual meetup! 

Every thriving technical community has individuals whose curiosity, perseverance, and generosity help shape its collective knowledge. In the InterSystems Developer Community, one such contributor is @Scott Roth, who has been an inspiring presence for nearly a decade.

👏 Let’s take a closer look at Scott's remarkable journey and his impact on the InterSystems ecosystem.

Hi Community,

On December 7, 2025, the InterSystems Developer Community officially celebrated its 10th anniversary! 🥳🎉

And now we honor this decade of learning, collaboration, problem-solving, and advancing InterSystems technologies. Whether you’ve been here since the beginning or joined recently, thank you for your contributions, questions, ideas, and support. This milestone belongs to all of you 💖 You’ve built this community into what it is today, and we’re truly grateful!

As part of the celebration, we invited you to participate in a special anniversary video. And boy, you delivered! Thank you to everyone who took the time to share their greetings, memories, and kind words.

For the question in the Title, the AI Chat gave a response of:

The ‘Current Users’ value displayed by the $System.License.ShowSummary() method represents 
real-time license usage tracked in shared memory on the local system.

We are trying to reconcile which user/process are associated with the counts that are returned.

Does anyone know how to get the detail of 'license usage tracked in shared memory on the local system.'?

Thanks you for your time.

- Patrick

As part of our 10th anniversary celebration, we invite you to take part in a discussion reflecting on your experience with the InterSystems Developer Community.

Over the past decade, thousands of members have shaped this space through knowledge sharing, collaboration, and meaningful connections — and your voice is an integral part of that history.

We encourage you to join the conversation and share your story. In the comments, please tell us:

I need to read first six characters from the filename we process in healthconnect, then need to insert these six characters in MSH-6 in the same HL7 message. (please note each file can have multiple HL7 messages with multiple MSH segments)

Is something can be done when first process the file, then insert first characters MSH-6?

Please advice if this is an easy fix.

Hi Community,

It's time to announce the winners of the InterSystems "Bringing Ideas to Reality" Contest! 

Thanks to all our amazing participants who submitted 14 applications 🔥

Now it's time to announce the winners!

Hello Community! As another great year comes to a close, I wanted to notify you about an upcoming change to the vscode-objectscript extension. In an effort to reduce the extension's footprint, simplify maintenance, and improve ease of use, InterSystems plans to remove some rarely-used configuration settings. Our telemetry tells us that these settings are changed from the default by fewer than 2% of users. However, before finalizing the removal I would like to give any users of these settings the opportunity to explain why a setting shouldn't be removed.

Working on interfaces, trying to add simple email alert (link below) under "Operations"

https://docs.intersystems.com/healthconnect20231/csp/docbook/DocBook.UI…

if the message is good,  health connect processes ok.

if the message has an ERROR, it held up the message in Queue (keep retrying), then subsequent messages held up in the queue as well to be processed. Because of the message held up in Queue, Operation for TCP connection also turning blue.

Please advice.

Hi community,

we recently updated our Health Connect instance from 2021.1 to 2024.1 and also migrated to new hardware. The production environment is connected to an enterprise message bank system.

After going live with the new system we recognized, that enterprise system nodes in the messagebank were automatically created using a hostname for the "Web IP Address" setting, which actually had changed (to the hostname of the former production environment) before starting the production and sending messages. The "Client Nickname" contains the correct hostname.

It was encouraging to see more people building VS Code extensions for the recent contest. However I noticed that of of the three extensions requiring credentials with which to make their connections only mine, gj :: dataLoader, leverages the long-established and officially-supported InterSystems Server Manager extension to obtain the connection definitions and to handle credentials securely.

Need to capture filename during BPL process, then set it to MSH-6 in the HL7 message.

Please advice, if this can be done.

Hi,

I need a simple function for formatting a string, like in Python or C#. That's easy:

Class Very.Very.Long.Class.Name
{
ClassMethod Format(fmt As %String, args...) As %String [ Language = python ]
{
return fmt.format(*args)
}
}

To simplify calls, I want to wrap the function into a macro:

ROUTINE StringUtil [Type=INC]

#define FMT(%fmt,%a0)                                           ##class(Very.Very.Long.Class.Name).Format(%fmt,%a0)
/// #define FMT(%fmt,%a0,%a1)                              ##class(Very.Very.Long.Class.

We are happy to present the bonuses page for the applications submitted to the InterSystems "Bringing Ideas to Reality" Contest 2025!

See the results below.

Apache Airflow is the leading open-source platform to programmatically author, schedule, and monitor data pipelines and workflows using Python. Workflows are defined as code (DAGs), making them version-controlled, testable, and reusable. With a rich UI, 100+ built-in operators, dynamic task generation, and native support for cloud providers, Airflow powers ETL/ELT, ML pipelines, and batch jobs at companies like Airbnb, Netflix, and Spotify.

Airflow Application Layout

Hi Community,

It's voting time! Cast your votes for the best applications in our InterSystems "Bringing Ideas to Reality" Contest:

🔥 VOTE FOR THE BEST APPS 🔥

How to vote? Details below.

I use $SELECT() in Architect to aggregate various data conditions into a single dimension.

I have a data table like this: id, user, userData1, userData2...

Where each user action is the %Integer ID of that action from some source. Then in expression field i use: $SELECT(userAction1:"This user action", userAction2:"That user action".) and so on, up to 14 conditions, excluding the default placeholder 1:"Other" (which is always empty because there is a condition with 100% chance).

Introduction

In today's rapidly evolving threat landscape, organizations deploying mission-critical applications must implement robust security architectures that protect sensitive data while maintaining high availability and performance. This is especially crucial for enterprises utilizing advanced database management systems like InterSystems IRIS, which often powers applications handling highly sensitive healthcare, financial, or personal data.

Hey Community!

We're happy to share a new video from our InterSystems Developers YouTube:

⏯  SQL Tricks and Tips @ Ready 2025

Given a JSON schema at runtime, I want to programmatically create persistent classes with corresponding properties and indices. Is there a way to dynamically compile and load such classes?

Hey Developers,

Enjoy the new video on InterSystems Developers YouTube

⏯ Enhancing Customer Engagement with Vector Search - Building a Customer Facing Chatbot @ READY 2025

Hello Community! 👋
Welcome to the second part of the IRIS IO Utility series. This extension represents my submission for the InterSystems "Bringing Ideas to Reality" Contest 2025 and offers you an intuitive and powerful interface for importing and exporting data directly inside VS Code.

• You can find the extension on my GitHub page: pietrodileo/iris_io_utility
• VSIX file to install the extension on VSCode can be found on the related release page: releases: iris-io-utility

If you find this extension useful, please consider voting for me at the contest!

Hi everyone. Long time no see. Again, I would like to share what I am studying recently Create Foreign Tables Using SQL via JDBC.

Since I am learning about the IRIS BI at the same time, so I started with this Sample-BI docker environment

https://github.com/intersystems/Samples-BI

After starting the environment, login to the management portal http://localhost:52773/csp/sys/UtilHome.csp  with the user Superuser.

Switch the namespace to IRISAPP.

😀 We will find out that all the sample data are stored in this namespace IRISAPP.