Hi, Community!

Are you looking for ways to strengthen your InterSystems IRIS® data platform deployment? See how mirroring can help:

Architecting for Success with Mirroring

Hey Intersystems Community!

I'm trying to get IRIS to serve static files, including security and redirect to login if no session is present.

This is the flow I am trying to accomplish:

1. User Opens a page, <my-iris-instance>/my-app/index.html, index.html being a static file
2. User is redirected to the default IRIS Login page since no session is present
3. User logs in
4. User gets redirected back to index.html

For CSP applications this seems to work. I can open "http://localhost:52773/csp/sys/sec/%25CSP.UI.Portal.Applications.Web.ze…" in an incognito tab and get redirected to th

I have a small web application developed on angular js hosted on IRIS using web application option from management portal. 

I am looking out for a login page which can simply use Health Share  authentication to get user login. 

Simple CSP login page to come when application is launched . 

I have a quite complex FHIR Implementation Guide (IG) which is based on several other FHIR IGs. It's likely the versions of IGs conflict with each other.
From what I understand, I would need to load in all the other FHIR IG's first? 
I don't actually need FHIR profiles to be in our FHIR Repository - I'm just after terminology and the examples for our test system.
Is it possible to load a FHIR IG just as data? (I think I mean here, ignore the FHIR profiles and dependencies between them)

You may have noticed that to configure a mirror for InterSystems IRIS for Health™ and HealthShare® Health Connect there is a special requirement. I wanted to go through it step by step in this article.

This assumes you have already configured the second failover member and confirmed a successful failover member status in the mirror monitor:

Step 1:Enable HS_Services user (on backup and primary) 

Step 2: Switch to Namespace HSSYS and go to Interoperability > Configure > Credentials. Enter the Password for your predefined HS_Services user (on backup and primary)

Step 3: Schedule the

🚀 We’re excited to share that InterSystems is once again joining Hack Jak Brno 2025. 
📅 Event dates: 28 - 30 November 2025
📍 Location: Masaryk University in Brno
🔗 Learn more and register at www.hackjakbrno.cz 🚀

Hi guys,

I'm looking to mimic this Post request URL where I'm sending a token :

So I created the below code but I'm getting "HTTP/1.1 405 Method Not Allowed" error 

s Url="myurl/confirmed?id="_token
Set Httprequest1=##class(%Net.HttpRequest).%New()
Set Httprequest1.SSLConfiguration="LS2"
Set Httprequest1.Server="myserver.com" 
Set Httprequest1.Timeout=30
Set Httprequest1.Https=1
Set Httprequest1.Port=7711
set Httprequest1.ContentType="application/json"
Do Httprequest1.SetHeader("Accept","application/json")
Do Httprequest1.SetHeader("Accept-Language","en_US")
//D Httprequest1.EntityBody.Write(token)
S

Can someone help me understand what type of user error (?) is going on here please?

One one system, I write out a group of $c() values and get the expected results:

USER>for i=250:1:260 { write i," ", $c(i),! }
250 ú
251 û
252 ü
253 ý
254 þ
255 ÿ
256 Ā
257 ā
258 Ă
259 ă
260 Ą

USER>w $zv
IRIS for Windows (x86-64) 2023.1.4 (Build 580U) Fri Apr 19 2024 11:16:07 EDT
USER>

On another system, I get some unexpected results:

USER>for i=250:1:260 { write i," ",$c(i),! }
250 ú
251 û
252 ü
253 ý
254 þ
255 ÿ
256 Ā
257 Ä
258 Ä‚
259 ă
260 Ä„

USER>w $zv
IRIS for Win

i am looking for a Class or Function to check if a Base64 document is valid ( will results into Full file after decoding or not ), 
i was not able to find any predefined class in Objectscript ,
has anyone worked on something  similar before ?
any advice will be welcomed 

I would like to share with you a little trick to customize how messages are displayed in the Message Viewer. In particular, how you can display messages as JSON (instead of the default XML representation).

Messages are objects that are used to communicate interoperability productions components. In my example I have defined a message that later I serialize as JSON to send to an external API. This message is defined as a regular message and also as a %JSON.Adaptor so I can export / import directly to or from JSON.

Class interop.msg.DeviceOrderReq Extends (Ens.Request, %JSON.Adaptor)
{

Paramet

Hey Community,

Enjoy the new video on InterSystems Developers YouTube:

⏯ Using SerenityGPT to Build Out an Application GenAI Middleware at InterSystems @ Ready 2025

Introduction

In this article, we will explore various approaches to extending and customizing the behavior of InterSystems IRIS (and IRIS Health) built-in interoperability message routers.

Message routers perform one of the core functions of Enterprise Application Integration (EAI) and are among the most frequently used business processes in interoperability productions.

After a brief overview of the built-in message router classes in InterSystems IRIS and IRIS for Health, the article will demonstrate how to enhance their capabilities to achieve specific outcomes—without the need to develop

When IRIS 2023.2 reaches general availability, we’ll be making some improvements to how we tag and distribute IRIS & IRIS for Health containers.

IRIS containers have been tagged using the full build number format, for example 2023.1.0.235.1.  Customers have been asking for more stable tags, so they don’t need to change their dockerfiles/Kubernetes files every time a new release is made.  With that in mind, we’re making the following changes to how we tag container images.

Major.Minor Tags:  Containers will be tagged with the year and release, but not the rest of the full build number.   Fo

APM normally focuses on the activity of the application but gathering information about system usage gives you important background information that helps understand and manage the performance of your application so I am including the IRIS History Monitor in this series.

In this article I will briefly describe how you start the IRIS or Caché History Monitor to build a record of the system level activity to go with the application activity and performance information you gather. I will also give examples of SQL to access the information.

What is the IRIS or Caché History Monitor?

The History Monit

Can someone give me an explanation of how Local.PD.Linkage.Definition.Individual works? This was setup by another company as part of our implementation.

Below is my configuration..

We are getting a lot of matches on Given Name, but then the Family Name does not match at all, so I am wondering if these need to be adjusted. I just don't understand if they need to be positive or negative.

if I use the MLE CALIBRATION MONITOR, it seems that none of the values should be negative.

Hi everyone, on HealthShare Unified Care Record 2024.1.0 Build, we're using the Analytics section to create a dashboard containing a time chart showing a cumulative curve of the number of documents indexed in the registry for each documentSource of each repository. We tried the following steps: we created a cube whose dimensions are the CreationDate, SourceValue, and repositoryUniqueID of the HS_Registry.Document table; in the Analytics section, we created a pivot table that lists the document creation date on each row, along with as many columns as each repository's documentSources. However,

Hello everyone! 👋

I have a question regarding roles and resources. 

To give you some context: I have a user who has been assigned only the role %HS_UsageDashboard_Access.This allows them to access the dashboards correctly (by giving the direct URL). Then,  if I try to access the Management Portal with this same user, I can log in with no access to any resources within it (as expected).

The point is that I would like to completely deny him access to the Management Portal, while allowing him to view only the dashboards, as expected from the %HS_UsageDashboard_Access role. I can give users acc

Hello, thanks for your time reading this question.

We are receiving each day, alerts from one of our four Production nodes. It always has the same text:

[InterSystems IRIS SEVERE ERROR gchciris4.canariasalud:ENSEMBLE] [Utility.Event] [SYSTEM MONITOR] CSPGatewayLatency(127.0.0.1:443) Alert: CSPGatewayLatency = 5001.304, 5001.233, 5000.964 (Max value is 2000).

We have looked for it in the documentation here:

https://docs.intersystems.com/latest/csp/docbook/DocBook.UI.Page.cls?KE…

We thought it was related to the following paragraph:

"

Trying to check date in DTL. 

Want to throw a custom error not the default one from the $ZDTH. It does in the try as will write "Error" when testing the DTL but the actual error not showing. Report errors is turned on.  I also tried the THROW logic from best practices but that doesn't work either. $SYSTEM.Status.DisplayError(status) does display what the error should be returned. 

try 
 {
    set tDateH = $ZDATEH(tDateofDeath, 8)
 }
 catch ex 
 { 
  w"error"set status = $$$ERROR($$$GeneralError,"Custom error message")
 do$SYSTEM.Status.DisplayError(status)
 do$System.Status.De

Hi Community,

Please welcome @Henry Pereira as our new Moderator in the Developer Community Team! 🎉

As an active member, Henry has consistently shared valuable insights, supported fellow developers, and driven meaningful discussions across the Community. His deep expertise and collaborative spirit make him a perfect fit to help guide and grow our Developer Community.

Let's greet Henry with a round of applause and look at his bio!

If one of your packages on OEX receives a review, you get notified by OEX only of YOUR own package.   
The rating reflects the experience of the reviewer with the status found at the time of review.   
It is kind of a snapshot and might have changed meanwhile.   
Reviews by other members of the community are marked by * in the last column.

I also placed a bunch of Pull Requests on GitHub when I found a problem I could fix.    
Some were accepted and merged, and some were just ignored.     
So if you made a major change and expect a changed review, just let me know.

When using a EnsLib.RecordMap.Service.FileService business service, is there a way to tell which row number that is being read in? I want to read in a csv, but on the first record, trigger a truncate on the External SQL Table that it is being written to through JDBC.

Thanks

Scott

How to define a For loop in *.inc file?

Overview

This release introduces the FHIR Server 2025.10.0, delivering the latest standards compliance and performance improvements. It also enhances the Health Connect Cloud (HCC)upgrade process for greater reliability and adds new flexibility to Network Connect through prefix list support in VPN configurations.

New Features and Enhancements

Hey Community,

Enjoy the new video on InterSystems Developers YouTube:

⏯ Operations & Scalability with InterSystems IRIS - From Zero to Hero @ Ready 2025

Hello!

I'm trying to create some foreign tables to a PostgreSQL database. In some cases, columns with certain datatypes cannot be consumed by IRIS and the following error is thrown:

 [SQLCODE: <-237>:<Schema import for foreign table did not return column metadata>]

  [%msg: <Unkown data type returned by external database>]

For example: serial4 typed ID columns are typical examples. Is it possible, what's the best way of resolving these datatypes, which- seemingly- don't have proper JDBC metadata mappings?

Of course, explicitely defining columns and types as part of the CREATE FOREIGN TABL

Hi,

I'd like to report a really strange behavior of the Intersystems Lite Terminal after executing a simple ObjectScript instruction.

From the Intersystems Lite terminal, execute the following instructions:

- Set uniqueId = "12345678_1"
- Set uniqueId = $p(uniqueId,"_",1)_"_"_($p(uniqueId,"_",*)+1)
After executing the second instruction, the terminal closes without any error.

Even stranger, when the second instruction is executed with 2 instead of 1, it executes correctly:
- Set uniqueId = "12345678_1"
- Set uniqueId = $p(uniqueId,"_",1)_"_"_($p(uniqueId,"_",*)+2)
- Write uniqueId
12345678_3

In

Every thriving community relies on members whose quiet dedication and deep expertise keep it growing stronger year after year. In the InterSystems Developer Community, one such pillar is @Megumi Kakechi, a long-time engineer and support specialist whose 17 years with InterSystems and 9 years on the Developer Community reflect a true passion for helping others learn, solve problems, and innovate.

👏 Let’s take a closer look at Megumi's remarkable journey and her impact on the InterSystems ecosystem.

Is there any way of saving a representation of the results of a query created in the Message Viewer to a file - most obviously CSV.

We are reasonably adept at creating queries. We'd like to be able to send the output to a file, rather than resorting to cut'n'pasting from the message viewer window...

Is this possible? (on any version of Ensemble/Iris?)

Desired output to file something like:

ID,TimeCreated,Session,Status,Error,Source,Target,Body_MSH_MessageControlId,.....
1,8888888,2025-08-20 05:03:14.324,8438123,Completed,OK,ICE ADT Validator,ICE ADT TCP,1z123456,20220822......

Hey Community,

It's time for the new batch of #KeyQuestions from the previous month.