If you want to know more about a new project or generate a new way to see your project, the better way is using mindmaps or markdown documentation. The IRIS Connections allows to you generate the mindmap for your classes and get your classes documentation in a markdown file.

IRIS Connections installation

If you want to install using ZPM:

zpm:USER>install iris-connections

If you want to install using Docker:

1. Clone/git pull the repo into any local directory:

$ git clone https://github.com/yurimarx/iris-connections.git

2.

When you need to know the impact on a change in your project, it is very useful to see class dependencies in a network diagram. The IRIS Connections project allows you to see it.

IRIS Connections installation

If you want to install using ZPM:

zpm:USER>install iris-connections

If you want to install using Docker:

1. Clone/git pull the repo into any local directory:

$ git clone https://github.com/yurimarx/iris-connections.git

2. Open the terminal in this directory and run:

$ docker-compose up -d --build

Analyze your classes dependencies:

Go to your browser and access:

localhost:52773/connections/index.

I developed iris-log-viewer on a work laptop using an older version of IRIS. My messages.log file has nearly 10k lines. I noticed it takes a couple of seconds to read messages.log file line by line, import each line into a persistent class, and display messages on my screen. I wonder if Python can speed up the process.

I developed EmbeddedPython class. Initially I imported a python script file to read messages.log file in Python. Later I figured out how to write a Python classMethod where I invoke IRIS classMethod to import one line at a time while reading messages.log.

Usualy, if you want to deploy a solution, you need to add the items, configure your lookup tables and default configuration manually. 
It's okay if you have all the permissions and privileges to perform these actions. If you want to deploy to a client's production server, and you don't have the permissions, you need to indicate in a document ALL the steps that the deployment manager has to perform. 

Hi everyone,

I have been reading up a bit on projection. I found a reference made to %Projection.Monitor on this page.

However, I cannot find any further information on %Projeciton.Monitor. What is it? How does it work? How do you use it? What value does it add?

Thank you.

For quite some time I am bored by slowly starting Docke Demos from OEX.
I type

docker-compose up - d

and after a few seconds

docker-compose logs

And I just see ISC Agent was started and is hanging around
No IRIS instance is up yet.

The last days I've work with the great new feature: LOAD DATA With this post I would like to share my first experiences with you. The following points do not contain any order or other evaluation. These are only things that I noticed when using the LOAD DATA command. It should also be noted that these points are based on the IRIS Version 2021.2.0.617 which is a preview release. So it may be that my observations do not apply to newer IRIS versions. But maybe they are helpful for others.

1) The file path is on server side

I have done my first tests via JDBC.

We have created a number of REST adapters that extend %CSP.REST and these have been working fine.  However, we are now facing a problem with a new one where very large XML documents are being posted.  This is the pattern we are following:

Set inMsg = %request.Content.Read()

Set tSC = ##class(Ens.Director).CreateBusinessService("Epro_ItkHttp",.tBusinessService)

Set tSC = tBusinessService.ProcessInput(inMsg, .tBusinessServiceOutput)

However, when the %request is particularly long, it is being truncated, and working with %XML.Reader then fails in the business service class.

When requesting /MDX2JSON/PivotVariables/Patients?Namespace Patients shoud be passed to a method but its not. When argument passed directly into the method it works.

Has something changed in IRIS and this syntax is deprecated, or is there a bug and the colon is ignored? What could it be?
This question is continuation from https://community.intersystems.com/node/534811

I have code hier and trying to view diacrit character

Class Test.REST.Services Extends EnsLib.REST.Service
{

Parameter ADAPTER = "EnsLib.HTTP.InboundAdapter";

Parameter EnsServicePrefix = "^TEST";

XData UrlMap
{
<Routes>
<Route Url="/dio/:Resource" Method="GET"     Call="getDio" />
</Routes>
}

Method getDio(pInput As %Library.AbstractStream, Output pOutput As %Stream.Object, pResource As %String) As %Status
{
    
        set status = $$$OK
        do pOutput.SetAttribute("ResponseCode","200")
        set messageBuffer = "{""text"":""Patiënt""}"
        do pOutput.Write(messageBuffer)
        do pOutput.

When requesting pivot variables from a cube, a 404 error is displayed. What's the problem? Is it IRIS or is it API?

 

    <TITLE>Not Found</TITLE>

 

    <H1>Not Found</H1>

    The requested URL /MDX2JSON/PivotVariables/Patients was not found on this server.

 

The power of the presented tool becomes visible with a large JSON file.
The example I have prepared is composed of the daily results of AoC 2023.
Anonymization makes it usable for demo purposes.

Early Access Program (EAP) is a way to to deliver specific features early to a group of people who will test and provide feedback on that feature.

One of those EAPs is about the the discontinuation of the Apache web server installation (a.k.a. NoPWS) from IRIS product installers. If you're interested in this topic and want to test it, the way to register is to send an email to nopws@intersystems.com. Use this same email for any other feedback.

Once you get a confirmation email, you'll see the EAPs you have access in the Evaluation Services website. You must log in to see the content.

In general Global Streams are data objects embedded in Classes / Tables.
Using and viewing them with SQL is normally a part of the access to the containing tables.

SO WHAT?

During debugging or searching for strange or unexpected behavior there could be the need to 
get closer to the stored stream. No big problem with direct access to Globals with SMP or Terminal.
But with SQL you are lost.
So my tool provides dynamic access to Global Streams wherever you may need this
Special thanks to  @Oliver Wilms  for the inspiration for this tool.    

Is there anyway outside of IRIS and Ensemble to guage what Port they are using?

Ideally through file explorer, if it exists in a config file at all.

I want to avoid searching through all active ports on the machine if possible.

Hello!

Is there a way to call a business of another namespace?

My example:

BS calls BP

BP decides between two BOs – one in the same namespace, and the other one in another namespace

I am finding difficulty in getting ensemble setup.exe file. Can anybody help me out?

The similarity between JSON objects + arrays and Globals in IRIS or Caché is evident.
With small and medium size JSON objects navigation across %Dynamic Objects is comfortable.
But with large and/or deep cascaded objects it becomes a challenge.

The presented tool offers 3 variants

• loading an already existing %Dyamic object or Array into a global of your choice
• loading a %Stream containing a JSON object into a global of your choice
• loading an external File containing a JSON object into a global of your choice

Hi Community,

Watch this video to learn different ways to connect and interact with event streaming platforms like Kafka:

⏯ Working with Event Streaming Platforms @ Global Summit 2022

Hi Community,

I am configuring new SSL Configuration for Gmail (For sending errors to gmail in ensemble production) by following the below steps.

Step1:

Step2:Giving the server address smtp.gmail.com

Step3:Giving the port number , I have tried giving 465,587,25 as port number still is not connecting 

Can anyone please tell me where i am doing wrong on configuration?

Thanks,

Saroja.A

   InterSystems.Data.IRISClient.IRISException (0x00000000): ERROR #5002: ObjectScript error: <REMOTE EXECUTE INVALID WRITE>Load+20^%apiOBJ
   at InterSystems.Data.IRISClient.ADO.IRIS.ClassMethodStatusCode(String className, String methodName, Object[] args)
   at Setup.core.CacheCRUD.RunDeploymentClass() 

Throwing this error when calling  the  ##class(%Studio.Project).InstallFromFile() remotely.

The method works when ran through studio, but not when accessing via ADO.

I have a question for people currently in the community who support TrakCare implementations. 

Are you all currently working through the migration from Crystal/Zen over to Logi Reports? 

What are you plans for the Zen reports you can't migration off for example the HTML letter template? 

I have spoken with a few people regarding this topic but starting to get concerned if there is a call in the near future to decommission ZEN/ 

We've added a new channel to the Developer Community Discord Server, #platforms.  This is a good place to discuss issues related to Operating Systems, CPU architectures, and Containers supported by InterSystems products.

To kick things off, let's talk CentOS.

CentOS has been supported to give developers a free-to-use equivalent to Red Hat Enterprise Linux for IRIS development.  As you're probably aware, Red Hat made significant changes to CentOS which have resulted in it being significantly less stable than RHEL.

Hello all, 
I am facing a little issue with line separators.  I export classes with $SYSTEM.OBJ.Export to the file system, but I'm on a Linux (docker) environment and he uses LF. 

Is it somehow possible to change the line separator for the export or in general?

Thanks in advance!

Bests, Matthias

Hi All,

I want to run an SQL like below

Select ID,Rollno,Marks,Name,Section,Teacher from Marks left outer join Student on Marks.StudentID=Student.ID

Now, the Student.ID is having the encrypted value which is not matching with Marks.StudentID (as this is clear value).

I can get the clear value using encrypted value as follow

^StoreValue("EncryptStudentID",Student.ID)=$LB("123"). That 123 is the clear Student.ID which I need to match in SQL query (ON clause).

Now I Need to fetch the data from sql query matching both clear values.

Hi All,

I have a below query for which I need help.

I have a persistent class User.Cars.cls. The properties of this class is mapped through Global mapping with global (^CAR(Date,CarSerialno,Seq)).

Property CarNumber as %String (TRUNCATE=1) [SqlFieldName= CAR_Number];

Mapping of 5th Piece of ^CAR global to CarNumber property.

For e.g.^CAR(Date,CarSerialno,Seq)=1^2^3^4^BMW 4567^6^7

To increase the security we have encrypted the database. 5th Piece is also encrypted in global (New value after encryption: 'ASAD=4367' through some tool technique).

I have a system that is sending Line Breaks\Carriage Returns within the text of a field that is breaking the parsing of the message. Does anyone have a way to get around this?

here is what I receive... 

ZPR|29|937952|UH|Physician Assistant - Certified|Primary Privileges:  Physician Assistant|Care of simple fractures including extremity, rib and clavicle; including skeletal
immobilization||

as EnsLib.HL7.Service.

At InterSystems, we believe in the responsible disclosure of recently discovered security vulnerabilities.  We provide timely information to our customers, while keeping it out of the hands of people that may misuse it. We also understand each customer has different requirements related to the resolution of security issues.