InterSystems Developer Community is a community of 25,531 amazing developers
We're a place where InterSystems IRIS programmers learn and share, stay up-to-date, grow together and have fun!
Learn more

I am using EnsLib.RecordMap.Operation.FileOperation to write a daily file with the name %Y%m%d.txt so that every day I will have one file as that day's date and a .txt extension.

What I want to do is every morning around 1am or so, use EnsLib.RecordMap.Service.BatchFileService to pick up that recently completed file.

Can you use operands in the File Spec field? I am assuming that %Y%m%d-1.txt will not work.

Thanks in advance.

0 3
0 537

Hi

Can I use a the SQL 'Table-Valued Parameter' when i call a store procedure in sql outbound adapter using ExecuteProcedure?

to pass multiple rows all together as a block, I need to process all the records in one transaction using commit and rollback (if failure)

Thanks

Gadi

0 1
0 278

Sometimes global mapping of the same globals can be defined in different ways. E.g., I need to define it for 3 globals ^qAuditC, ^qAuditLog, ^qAuditLogC from the same database named APP-NOJOURN. Which approach should be better from the performance point of view?

1) qAudit* => APP-NOJOURN (one record in global mapping table)
or

2) qAuditC => APP-NOJOURN
qAuditLog => APP-NOJOURN
qAuditLogC => APP-NOJOURN (three records in global mapping table)

0 3
0 652

Hi Everyone!

New session recording from Global Summit 2018 is available on InterSystems Developers YouTube Channel:

Embedded Analytics in Action

https://www.youtube.com/embed/PQqfrxIYMoc
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

0 0
0 288

So I have an interesting problem. I am going to be using a process and rule to determine if an HL7 message qualifies to be sent out, then using a record map to write certain aspects of that HL7 message to disk (with an HL7 to record map DTL). This is simple enough but the recipient of this file is requiring a single record map entry per DG1 segment in the HL7 message.

For instance if said HL7 message for PATIENT^TEST has 3 DG1 segments, I would need to write three lines (or records) like so:

123^^^^MR|TEST|PATIENT|DG1(1) TEXT|DG1(1) CODE|DG1(1) DATE

0 8
1 1.3K

This is my first post, I have only been using Healthshare for a year.

We support multiple Healthshare test and development environments. We are trying to come up with the best solution for building an environment from scratch, as well as incremental updates. I am interested in hearing the pros and cons between using the Ensemble -> Export Production feature versus creating custom classes to do the install and setup.

3 4
2 489
Question
· Aug 16, 2018
%UnitTest.TestCase

I need to start doing unit testing for some of my code.

Why does it delete the unit testing class from Cache when I run the test?

Is there a way to turn this off?

0 20
0 746

I'm able to log into my local instance of HealthShare through the Management Portal, but once I've done so, the screen is entirely blank. I'm still able to access Terminal and Studio without any issue, as well as a hosted instance's Management Portal. I've tried stopping and starting HealthShare, no luck. I've been working on this instance for the past several months and haven't experienced anything like this, and I don't know of anything that I was doing that would have broken the Management Portal. Anyone have a suggestion as to where to go from here?

0 3
0 570

InterSystems Data Platform includes utilities and tools for system monitoring and alerting, however System Administrators new to solutions built on the InterSystems Data Platform (a.k.a Caché) need to know where to start and what to configure.

This guide shows the path to a minimum monitoring and alerting solution using references from online documentation and developer community posts to show you how to enable and configure the following;

  1. Caché Monitor: Scans the console log and sends emails alerts.

  2. System Monitor: Monitors system status and resources, generating notifications (alerts and warnings) based on fixed parameters and also tracks overall system health.

  3. Health Monitor: Samples key system and user-defined metrics and compares them to user-configurable parameters and established normal values, generating notifications when samples exceed applicable or learned thresholds.

  4. History Monitor: Maintains a historical database of performance and system usage metrics.

  5. pButtons: Operating system and Caché metrics collection scheduled daily.

Remember this guide is a minimum configuration, the included tools are flexible and extensible so more functionality is available when needed. This guide skips through the documentation to get you up and going. You will need to dive deeper into the documentation to get the most out of the monitoring tools, in the meantime, think of this as a set of cheat sheets to get up and running.

13 1
8 2.4K
Question
· Mar 10, 2019
Try Cachè on Ubuntu

Hello.

There is a way to install and try Cachè 2018.1 on Ubuntu 16.04 distribuition or it's necessary use Red Hat/Suse distribuition to try Cachè on Linux?

0 4
0 636
Question
· Mar 9, 2019
%SYS.TasK Related query

Hi Community,

I have to make a daily task (Job) which will run (7 am to 7 pm) in a day at an interval of 3 hours. Timings are as (7:00 am, 10:00 am,13:00 pm,16:00 pm,19:00 pm). But at each time when task will run i have to set a variables as per below condition

Sample:

1) If task run at 2019-03-19 07:00 am in morning

I have to set two variables (start and end) whose value will become like this

(set starttime= 2019-03-09 07:00:00.00 and set endtime=2019-03-09 10:00:00.00)

0 3
0 385

Hi community,

I have a rights problem when giving a user permission to perform some select queries on particular tables. So I have created a user with the following rights.

So this all works well. No problem so far. But the customer is using a program where you can easily build visually the query by selecting the table, choose the right colums etc. So the problem we have is when I give the user the Role %All the tables are shown.

0 6
0 676

I have a cache client trying to call a web service using SOAP version 1.2. We receive a SOAP error with the following text:

COD>w ##class(DBMS.Tools).DecomposeError(%objlasterror)

ERROR #6248: SOAP response is a SOAP fault: <Fault><Code><Value>s:Sender</Value>

0 3
0 2.2K

Hello Gentlemen,

My Business process connector receive a Oru_01 hl7 message with an ED segment inside (Base64 pdf). How is it possible to extract it and create a pdf file within?

Here is the sample of function I have. I know it doesn't work but if you could help me, it would be perfect. Here is my function, the goal would be it create the file where I want and return me the link of the file.

0 5
0 2.3K

Hi Community!

There are two general ways to execute arbitrary SQL in serverside ObjectScript code: EmbeddedSQL and ObjectScript SQL a.k.a. Dynamic SQL.

E.g. if we want to get the value of the property of instance with a certain ID using SQL we can do:

&sql(SELECT Name INTO :name FROM Sample.Person WHERE ID=1)

write name

Same result with %SQL.Statement:

set rs=##class(%SQL.Statement).%ExecDirect(,"SELECT Name as name FROM Sample.Person where ID=1")
  do rs.%Next()
  write rs.name

1 2
0 1.1K

Hi,

I would like some help/ information regarding queued messages.

I have 1040 messages that are queued, but I only want to process the first 28 of them. Is there a way that I can do that?

If I abort them, would all of them go away?

Would appreciate if you can advice me on this

Regards,

Eric

0 1
0 817

Hi,

I am trying to create a user role which shall allow users the access to only one specific namespace in an Ensemble system. I´ve startet creating the namespace with a database (with own ressource and no public access). In the second step I´ve created a role by copying it from the predefined role %Developer and assigned the ressource of the created database. After that i´ve created a user and assign him to the created role.

0 2
0 634
Question
· Mar 7, 2019
JSON challenge

Hello folks,

I have an JSON object that need to be updated before being parsed into a JSX component.

Source JSON obj:

var Obj = { "data": [
  {"id":1, "text":"Task #1", "project":"10", "sub_project":"10-1" },
  {"id":2, "text":"Task #2", "project":"10", "sub_project":"10-1" },
  {"id":3, "text":"Task #3", "project":"11", "sub_project":"11-1" },
]};

Required JSON obj result:

0 1
0 474

Let's imagine you have only SQL. You need some table where you should increment value in some property when you update this line.

We have the table

CREATE TABLE "test" (
  "identifier"   VARCHAR(200) NOT NULL,
  "value"        INTEGER,
  PRIMARY KEY ("identifier")
)

1 6
0 819