Hello,

Comming back to Cache after some long gap. Is it possible to use UUID  as primary key while creing a Persistant class (Not using the default numerical ID)?

and creating the relationships also using UUID?

Hi Team,

               Our community is most useful for my learning. I have one concern.We need to add a chat box for discuss and interact with other developer in our community . It is most useful for maintaining the team relationship and sometime we get guidance from anyone on directly. I known already we have the chat box in global master(that chatbox just we send greetingsrelated messages only). This same one is need for our community also(All are reading articals and question on our community page).So I am asking chat box on our community page also.

Thanks & Regards,

Ponnumani Gurusamy. 

Job description

The eHealth Exchange is seeking candidates for a Senior Interoperability Engineer position.

As a senior interoperability Subject Matter Expert (SME), the role involves translating and explaining complex technical information for prominent organizations across the healthcare spectrum including providers, payers, Health IT vendors and service providers, health information exchange organizations (HIEs), and federal agencies, focusing on how eHealth Exchange solutions solve specific challenges.

Hey Community,

More than 700 applications are already available for everyone to download on the InterSystems Open Exchange. 

And now it's time to announce the best developers and the most downloaded apps for 2022!

Let's take a closer look at our heroes and their apps:

Why I've decided to write this

Once again I had a challenge that costed me some time and a lot of testing to reach the best solution. And now that I've managed to solve it, I'd like to share a little bit of my knowledge.
 

What happened?

In a namespace there were a lot of similar classes, so to make them simpler there were a superclass with comon properties. Also, there are relationships between them. I had to export one of them to JSON, but I couldn't change the superclasses, or I would break down the flow of many other integrations.

What made it all difficult was the problem that my JSON

 InterSystems announces its second developer preview, as part of the developer preview program for the 2023.1 release. Many updates and enhancements have been added in 2023.1 and there are also brand-new capabilities, such as production-ready support for Columnar Storage, ability to use Bulk FHIR, and support to MacOS 13 Ventura. Some of these features or improvements may not be available in this current developer preview.

Future preview releases are expected to be updated biweekly and we will add features as they are ready. Please share your feedback through the Developer Community so we can

Hey Developers,

Enjoy watching the new video on InterSystems Developers YouTube:

⏯ Real-Life Experiences Migrating a Caché Application Portfolio to InterSystems IRIS @ Global Summit 2022

Such most popular nowadays CI platforms as GitHub and Gitlab, offers the ability to run any docker image as a service, mostly useful for integration tests.

And I could define a GitHub workflow like this for instance, for some of my Python project which, requires the connection to IRIS

name:IRIScontainerexampleon:pushjobs:# Label of the container job  container-job:# Containers must run in Linux based operating systems    runs-on:ubuntu-latest# Docker Hub image that `container-job` executes in    container:python:310# Service containers to run with

In-person classroom training is back, and discounts are available! Details are in the February 2023 newsletter, along with the latest online learning content—including certification prep, a fresh podcast, and new videos. Make sure to subscribe to the newsletter!

Hi Guys,

How to create a user that can have access to only one specific Zen page of an application?

Thanks

Any ideas on how this can be solved?

I need to use it with some Unicode text, in Docker image. And get this error. And documentation says nothing about it.

USER>do$zf(-100, "/SHELL", "echo", "test")
test

USER>do$zf(-100, "/SHELL", "echo", "test тест")

DO$ZF(-100, "/SHELL", "echo", "test тест")
^
<TRANSLATE>

I know that it works in some Linux environments without Docker, but no idea where is the difference. 

Morning all,

I got access to the new Bing this morning and thought I would try out some things on it. Below are a series of screenshots of what I searched and the results.
Please share your experiences here too.

   Searching for help with arrays:

  A search for a Python related topic:

We have a remote opportunity for a Interface Engineer. 

If you have a strong background working with InterSystems 2021.2 Let's connect.

Netsmart is one of the nation's leading EMR developers for the Post-Acute / Human Services / Senior Living Care Market.

If you would have an interest in learning more then please reach out to Gary Brown at gbrown@ntst.com 

Hi Guys,

I'm looking for an easy to allow certain user to only have access to one CSP or Zen page from my application, my thoughts is to create a role to only access that specific page then allocate that role to my user, but can find the Zen page so I can allocate it to a role? 

Thanks

Hi Guys,

How can I restrict access to a webpage to a specific user only?

Thanks 

Has anyone had experience using IRIS as an SFTP endpoint.  We want to use SFTP to receive files from a bank.

Hi, I am facing below error while sending the data from one namespace to another namespace.

ERROR <Ens>ErrFailureTimeout: FailureTimeout of 15 seconds exceeded in EnsLib.TCP.PassthroughOperation; status from last attempt was ERROR <Ens>ErrOutConnectionLost: Lost TCP Counted Read connection to xx.xxxx.xxs- detected via ERROR <Ens>ErrException: <READ>zReadCountedStream+10 ^EnsLib.TCP.CountedCommon.1|Block Count -- logged as '-'
number - @'
Else { Read tLenStr#4:pStartTimeout Set tTimedOut = '$Test }'

Sender  Version is Ensemble 2017.1

Receiver version: HealthConnect:3.5.0

Can some one please help me

Dear community members!

A very common problem of our users is to use an external database as data source in an IRIS production. As many of you already know, we have two ways to connect directly to an external database, the first one is using an ODBC connection, the second is using JDBC.

In our example we are going to create a connection using JDBC, and we are going to build a simple Docker's project, in this way you will be able to modify the example as you wish.

The code is available from this URL: https://github.com/intersystems-ib/workshop-sql-jgw

In our docker-compose.yml file we are going to

Hi Community, 

We've launched a nice competition on Global Masters under the "Season of Giving" campaign, which I hope will bring inspiration to all of you!

We inviting you to share your task ideas for new applications that could be developed on InterSystems Technology. Let's enrich our Open Exchange apps gallery with great applications in 2021!

is it possible to export a specific data lookup table (Ens_Util.LookupTable) directly into Recordmap or Request message class or just a list of strings for me to loop through them?

Trying to find an optimal solution for a high volume interface.

Following up on the topic of making sure that referenced instances are deleted when the referrer is deleted –

I have a compactJWE that I want to decrypt using a key. I read the key from a .pem file and create a JWK with "RSA-OAEP" algorithm. I have the code below in a routine (.mac) file.

decryptJWE
    #include %msqls file = ##class(%Stream.FileBinary).%New()
    s file.Filename = "mycert.pem"s rsaKey = file.Read($$$MaxLocalLength)
    zw rsaKey
    s compactJWE = "en.cry.pted.jwe"s jwk = ##class(%Net.JSON.JWK).%New()
    s jwkStatus = jwk.Create("RSA-OAEP", rsaKey , .privJWK, .pubJWK)
    zw jwkStatus

    s jwks = ##class(%Net.JSON.JWKS).%New()
    s jwksStatus =

Hi:

I don't understand how to use this open exchange item for auto creating deleting items. I think it assumes knowledge in the steps of how to use it which i don't get. 

Added the code into dev on  SRFT.Utility.DeleteHelper.OnDeleteSuper and SRFT.Utility.DeleteHelper.AddHelper  

current class is 

Class Messages.XML.GenericWif.fileparameters Extends (%Persistent, %XML.Adaptor)
{

Property revisionnumber As %String;

Property primarylink As Messages.XML.GenericWif.primarylink;

Property additionalindexes As Messages.XML.GenericWif.additionalindexes;

} 

Adding the extends doesn't seem to do anything to

Hi

I am upgrading our application from dotNet Framework to dotNet Core.

Prior to the upgrade I was able to connect to both my Cache & IRIS instances using the IRIS ADO.NET driver.

However, in dotNet Core, whilst I can connect to IRIS, I get the following error connecting to Cache.

InterSystems IRIS Provider is not compatible with Cache xDBC server
 

I am using the IRIS  driver from the Windows (x86-64) 2022.1 distribution (the one in dev\dotnet\bin\net5.0).

The cache version is Cache for Windows (x86-64) 2018.1.2

Thanks

Hi we have started to get rid of orphaned data and would like to soon compact and truncate the database as will have about 40gb free to return to filesystem after the few weeks of running the new task. 

The idea would be to do this on the shadow server first of mirror rather than primary. 

Is there any reason this is a bad idea? Considering this needs done on both servers of mirrored db? As idea would be to do this on shadow server before we failover to the server a few days afterwards. And do the same for the month afterwards. 

Also note we have tested our compact and truncate against a non

Hi Team,

Here we have requirement to send json data from on-premises iris to business service in cloud iris namespace. we have firewalls opened.

Could you please suggest any other ways with out using WEB Service (soap or rest) solution?

Thanks,

Prashanth

So I have a base string that I want to sign using RSA-SHA256. I have a .p12 file and passphrase to get the RSA Private key using NodeJS (pem.readPkcs12 library), which I don't know how to do that in intersystems as well. (would appreciate if you can include a solution for that too)
The main problem here is I am trying to sign a string and print the result to terminal, using the code below in a routine (.mac file).

SignTest
    s privateKey = "-----BEGIN RSA PRIVATE KEY-----\r\nsomeKey\r\nsomeKey\r\n-----END RSA PRIVATE KEY-----"s myString  = "text to sign"s signedTxt = ##class(%SYST

We are looking for Innovators!

We invite early stage startups to join Caelestinus digital health and FHIR startup incubator for the season 2023!

Hi,

I'd like to try out irissqlcli.

My  server, that has IRIS installed on it, is SUSE (SUSE Linux Enterprise Server 15 SP1).

How do install this product from GitHub? Detailed instructions would be great!

It would be best if I can download the software from GitHub and then get pip to install from that downloaded file repo.

The recommended:

pip install -U irissqlcli

does not work and comes back with "

ERROR: Could not find a version that satisfies the requirement irissqlcli (from versions: none)
ERROR: No matching distribution found for irissqlcli
"

Once I have this program installed:

irissqlcli -h