Hi

Is there a way to generate an MD5 checksum of a file by performing a checksum against the file's parts? We potentially have to process large files and therefore cannot keep the entire file in memory. From what I understand checksum related logic is typically stateful, allowing file data to be passed through sequentially, however it appears cache script offers only stateless functions offering a simple method of generating a single checksum hash from a single string (or stream), correct me if I'm wrong?

0 2
0 165

Has anybody encountered this before?

I did a very usual hl7 adt transformation DTL, but it is with a customized schema, like ADT_ALL, it is a structure that tries to cover all the ADT schema scenario so we can use 1 type for all ADT messages.

the DTL tests fine in DTL test, with all the segment transformed correctly, but once I put it to test, to send message through source and the message after transformation can only go to MSH, EVN, but won't transform other segment like PID etc.

0 5
0 99

We have a vendor that is requiring that the HL7 sent to them is sent as an Encoded message inside a SOAP request but is sending back an HL7 message as the response.

When the WSDL built the response, it was expecting an encoded message back. I updated the Request and Business Operation to expect an EnsLib.HL7.Message, however I am not sure how to handle the HL7 ACK to post it back to the sending message so it will not cause an Orphan message, and to parse it back correctly in the trace viewer.

When I do a $$$LOGINFO on the pResponse, I get back...

0 2
0 34

Hi ,

I'm using standard business service not(Customized business service). I'm not able to process the Hl7 data file which contains CRLF characters.It shows warning "Discarding Received non HL7 data". Actually it discards some segment after CRLF character. Is there any settings to overcome this problem?

Also i tried UTF-8, Ascii,Unicode.. characterset . But it won't work. Please help me .

Urgent!!!

0 11
0 1.8K

I'm currently working on a project to run our medical device integration through ensemble.

I've noticed a potential problem with the volume of messages . The feed generates around 474K messages daily( average of 1 message per minute per device from 300+ devices).

We currently keep all our other feeds message data for 90 days and purge automatically. From what I can see is that the purge functions in Ensemble are production wide and cannot set it at the Business Operation, Service or Router level.

0 1
0 402
Question
· Feb 20, 2019
HL7 ORU^R40 Schema Structure

We are currently on 2015.2.2 and in schema structures for vs 2.6 HL7 I do not have a ORU^R40. Its for a GE Device alarm. Has anyone hear of this structure, have a way to export it, and can send it to me so I don't have to build from scratch?

Thanks

Scott

0 3
0 1.2K
Question
· Aug 19, 2019
Filter by time in Routing Rule

I have a colleague that is trying to eliminate any HL7 transactions that have admit date/time of midnight from going to an downstream system within a routing rule. I have tried several different iterations of code trying to figure this out just in the routing editor. Without having to write an object script function is this possible?

0 4
0 424

Hi Community,

We're pleased to invite you to join the upcoming InterSystems IRIS 2020.1 Tech Talk: API-First Development on May 5 at 10:00 AM EDT!

In this week's InterSystems IRIS 2020.1 Tech Talk, we'll discuss API-first development and how InterSystems is embracing this industry trend with our API Manager, and specifically with our FHIR offerings. First, we'll talk about InterSystems API Manager. This tool controls your web-based API traffic in a single location. You can throttle throughput, configure payload sizes and whitelist/blacklist IPs, among many other features.

FHIR stands for Fast Healthcare Interoperability Resources. Release 4 brings this HL7 standard to maturity, and the FHIR R4 support in InterSystems IRIS for HealthTM is big. You'll learn how to work with FHIR data in InterSystems IRIS, and see our developer portal in action, where you can access FHIR resources using the OpenAPI specification.

0 0
0 407
Question
· Sep 12, 2022
Routing ACKS.

I'm trying to get an ACK routed to a different process in our Test environment and here is the router setup:

I have a rule in the target router to send to an operation.

The problem I'm running into is that the HL7 ACK coming back is marked as "Discarded", so it's not even getting to the second router.

0 4
0 343

Hi,

we get HL7 MDM messages with embedded PDF documents that are Base64 encoded. When the embedded PDF document exceeds the size of 3.6 MB the following error occurs:

FEHLER <Ens>ErrBPTerminated: BP Main HL7 MDM # wird wegen folgenden Fehlers beendet: FEHLER #5002: Caché-Fehler: <MAXSTRING>zgetAtFromArray+46^EnsLib.HL7.Segment.1
> FEHLER #5002: Caché-Fehler: <MAXSTRING>zgetAtFromArray+46^EnsLib.HL7.Segment.1

0 3
0 356
Question
· Jul 27, 2023
Rule logic

In an HL7 Business rule I am trying to block ONLY ORM messages that have a PV1:3.4 of 105 or 205 and a OBR:4 value of EP22 or CATH01.

I created the logic below but it appears to be evaluating the two fields independently instead of combined?

Here is what I had.

0 1
0 230
Question
· Nov 30, 2023
Multitransformations of HL7

This question originally appeared in the comments of the post: Making use of Multiple Sub Transforms in a main map || HL7

I'm having a similar problem trying to get PRD(1) into PV1:ReferingDoctor and PRD(2) into PV1:ConsultingDoc

Running the subtransform will populate referring doctor for the first PRD, and then the second running will delete the PV1, make a new one with only the consulting doctor populated.

0 1
0 220

Hi Community,

Watch this video to see how HL7® FHIR® Implementation Guides allow you to restrict or extend APIs, resources, and terminologies:

What are HL7 FHIR Implementation Guides

https://www.youtube.com/embed/E9oRde9fHGE
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

0 0
1 164
Question
· Nov 26, 2024
HL7 Encoding issue

Dear All,

I have been sent an HL7 message as a file with the MSH segment as follows....

MSH|^~\&|SendingApp|pms3medd|HealthLink|cribrumt|20241121050000|PKI|ORU^R01|01_ASCIItest_2|P|2.3.1||||||UNICODE

I try picking up the file with a "EnsLib.HL7.Service.FileService" business service using a EnsLib.File.InboundAdapter adaptor. The Character set is set to "Native" and the Default Char Encoding to latin 1.

I am seeing the following error:

0 4
1 171
Question
· Apr 18
HL7 DTL formatting

I need a DTL to handle this.

Any ideas appreciated.

For all Prosthetics orders:
when ORC-1(Order Control) is "NW" (New Order), need to update OBR-18(Placer Field 1) based on PV1-2 (Patient Class) value.
assumption is that the selection logic is that all prosthetics orders with OBR-18 field is always blank.
Description :
If PV1-2 is I, insert I in OBR-18
If PV1-2 is O, insert O in OBR-18
If PV1-2 is E, insert O in OBR-18
If PV1-2 is P, insert O in OBR-18
If PV1-2 is R, insert O in OBR-18
If PV1-2 is B, insert O in OBR-18

0 2
0 84
Question
· Apr 14, 2016
HL7 to Quadramed

Hi,

IHAC who is trying to connect Ensemble to Quadramed for HL7 messaging, however, it seems that in order to do this, the following is required:

"we open a passive connection to Quadramed and then listen for a connection request from Quadramed, once this is established we then send messages"

Has anyone done this before? Is this possible with the standard HL7 components?

Thanks,

Steve.

0 1
0 422

Is there a way to use a HL7 field value as part of the File Naming in the Business Operation FileOperation class. I know we can do this in a custom class, but I was wondering if it could be done the default FileOperation class?

Example:

MSH-4 contains the value 12345

We would like to name the file 12345_YYYYMMDDHHMMSS.HL7

MSH.4 value here_%Y%m%d%H%M%S.HL7

It may not be possible, but I just want to see if anyone has any information

Thanks,

Kevin Brown

0 3
0 869

For a HL7 production, How will I be able to use two different segment level transformation (sub transform) in the main transform.

For Ex:
Few mappings from source PID --> target ZAX segment (subtransform 1)
Few mappings from source PV1 --> target ZAX segment (subtransfrom 2),

In the main mappings, I have used subtransform 1 followed by subtransform 2. It doesn't seem working fine.

Any suggestions please. Thanks:)

0 2
0 602

Hi Community

I've just started developing for a new client and noticed that the View Raw Contents link isn't displayed when inspecting HL7 message contents in the Management Portal. Is the link missing due to:

1) a configuration setting?

2) a security setting?

3) a difference between installation on Unix Vs Windows?

And is there a way to turn it on?

I've trawled through the doco but haven't been able to find anything on this.

Thanks in advance for any help you can give

Duncan

0 2
0 283

HealShare 2017

Hi dev community,

I am currently working on an interface that needs to communicate to a SOAP/ITK endpoint.

I am using the EnsLib.ITK.AdapterKit.Operation.SOAPOperation to interface with an ITK
service, but it is proving to be more complex than originally expected to set up the web client
against that particular end-point since I haven't been provided with a WSDL from ITK service side as
the vendor state they are following the ITK standard and no WSDLs are needed.

0 1
0 357