#HealthShare

Hello,

We wonder how could we send an HL7 message to a service to test it.

For example, we have a service, at localhost port 19111

We have tried to use SoapUI to send a REST POST request as follows:

At the event log we see the following trace:

Then, if we try with POSTMAN as follows:

We observe:

Would it be the only way to test services, pointing a TCP HL7 operation to the service, and send messages using the Test Action?

We mean that we are testing manually sending messages from the operation "ProbarADTs" to "Servicios.TCP.GeneralHospitalADT":

How could we do it from SoapUI or Postman?

As I've become a little more familiar with HealthShare, I'd like to start exploring different ways of doing things. To date, the bulk of my data transformations have been using DTL; only using ObjectScript for a few operations that write to external SQL tables that were largely based on examples provided by my sales engineer.

I'd like to trying doing all of the data transformation in a process using ObjectScript.

Is anyone have ever work on AS2 to push and pull the EDI? If yes please help me on this.

This message contains three recent HealthShare Advisories, which are available below.

• Advisory: ODS Not Storing Observations When Terminology Translations Are Used
• Advisory: Composite Record Definition Must Reference Implemented Linkage Definition
• Advisory: Potential for Outdated Terms of Use to be Presented in Personal Community

These advisories are also on the InterSystems Product Alerts and Advisories page

June 30, 2020 – Advisory: ODS Not Storing Observations When Terminology Translations Are Used

InterSystems has corrected a defect that may be experienced if a terminology mapping

I'm cautious not to ask too many questions on here, but there really doesn't seem to be a good XML end to end guide that explains these things. 

I have now a Business operation that's going to call a url like https://directory.spineservices.nhs.uk/ORD/2-0-0/organisations/Y00334?_…

I'm looking the status of the practice- I tried date but again fell flat as i wan't able to ensure i only got the end date from the first <date> tags and not any subsequent dates. 

Managed to do it kinda in a class method like so 

  set httprequest = ##class(%Net.HttpRequest).%New()
    set httprequest.SSLConfi

Hi all

Does anyone have an easy way of reading the cdata in the xml response returned buy a Webservice?

At the moment I have a XML class and then I use read.Correlate() to read through that XML bit.  

However, depending on the message I have different things in the CData and I don't want to create a class for each one of these.

The API returns the cddata as KeyValueOfstringstring.

My idea would be to send to my method the cdata as a parameter which is the KeyValueOfstringstring part of the response message and then deal with it...

Any help would be appreciated...

Best Regards

Good day all

I am a new developer in cache, I am trying to connect vscode to healthshare but i get the following error:

////Error: Error: Parse Error: Expected HTTP/////

Please help me on this.

My setting like this:

{

    "objectscript.conn": {

      "active": true,

      "label": "LOCAL",

      "host": "****",

      "port": 57772,

      "username": "***",

      "password": "***",

      "ns": "***",

      "https": false,

    },

    "objectscript.export.folder": "src", 

    "objectscript.serverSideEditing": false

  }

I have a code tag that performs some logic in a DTL, and want to add to it the ability to find the number of substrings delimited by a dollar sign ($) within a particular string. I have tried the following which compiles just fine, but generates an error when testing in the Data Transformation Builder.

ERROR <Ens>ErrException: <SUBSCRIPT>zTransform+985^LH.IAMON.IAMONORU1XsformDTC2.1 *DCOUNT() Encoded subscript 1 > 511 bytes -- logged as '-' number - @' set lineCount = DCOUNT(reportBody,"$")'

Hi All,

I was just wondering whether anyone can help, I have managed to configure LDAP within Healthshare [HealthShare Modules:Core:15.032.9688], and I am also able to login with my LDAP user.  However, I am unable to assign any roles to this user, the user  appears on the users page however, it does not appear in the dropdown list of users when you try to update a particular role in the roles page (I am not sure where I have gone wrong with this).  I can login with the user but I don't get any where far with it because it has no roles assigned to it.  Any help would be great.

Kind Regards,

Sa

I am using healthshare 2017.2 & developed API in vb.net . sometimes API gets error when system tries to connect Cache Database. why this error occurs randomly ?

Hi, I am facing issue during LDAP lookup like whenever I used product group parameter in AD explorer to search data from application I am getting empty result. If I set product group parameter as null then based on distinguished name result is generated in application. So if anyone knows about how LDAP works and how parameters are set in AD explorer then please let me know.

Thanks in advance.

Hi Everyone,

We are trying to migrate old server to new infrastructure and need to sync all the DTL cls from old one to new one. There are hundreds of DTL in system and we tried to export from production but cannot select all at once which might cause some missing classes. Not able to connect to studio or atelier with that server neither. Is there any way that we are able to do mass export from system which will save some effort? Please let me know your thoughts. Thanks.

Ready Computing is a full-service IT firm, specializing in software development and data exchange solutions within the healthcare industry.

We are looking for a highly-motivated staff that can guide clients in developing their healthcare IT strategy and back up that guidance with high quality technical work.Solution Consultants work directly with clients, IT vendors, and internal teammates to deliver integrated health solutions.Solution Consultants focus primarily on deploying high volume interfaces and interoperability software.

I've got a REST service that I can access via a browser. I can get it to take HTML tags as data and display it back to me (so I know the REST part is working). So if I send it this:

http://MyServer:57772/TestArea/rest/TestQuery?UUID=1&RTX=RTX123456&CareType=Palliative
 

Then I can pick out the data and tell it to display in the browser, which is great but what I really want to do is put the data into a string and send to a business process that will do lots of looking up but eventually return a URL that my REST service will then redirect the browser to.

Been trying to follow advice from here but

Hi

While adding new patient getting this message, any idea what could be the problem

Hi Community,

The new video from Global Summit 2019 is already on InterSystems Developers YouTube:

⏯ InterSystems Health Connect: New and Next

InterSystems has corrected a defect that can lead to missing resource data in FHIR search results.

This problem exists for:

• HealthShare Unified Care Record 2020.1.0 b7015

This defect occurs due to an incorrect resource being deleted from the search index. Subsequent FHIR Resource requests against the FHIR Repository may return incomplete results due to that missing index. Any type of FHIR resource data can be lost, and depending on when the defect occurs, the same FHIR request could return different result sets.

This defect only affects FHIR resources at the HealthShare ODS.

Dear HealthShare Customer:

This post is part of the HealthShare HS2020-06 Alert communications process.  The same information is also distributed:

• By Email
• On the Product Alerts & Advisories page
• On the WRC Distribution Page InterSystems Documents

There are 2 Health Insight alerts in the HealthShare HS2020-06 Alert communication.  The Alert Summary is in the table below, and the detail is contained in the attached document: HS2020-06-Communication

Hi everyone,

I have an existing application on HealthShare 2015 and decide to move it to HealthShare 2018 to make use of Atelier support. I am using Eclipse Photon with Atelier Plugin 1.3.

Most of things are working better on Atelier comparing with Built-in studio of HealthShare. However, when I tried debugging CSP file with Atelier I encounter 2 problems:

1. 

From a CSP file, I can open the generated *.INT file without any problem. But when I open the generated *.cls file it shows me the error:

2. In the built-in HealthShare studio, I can debug a CSP file by viewing other code, put the breakpoint

Don't let your system grow unwieldy. Learn how to manage HealthShare Unified Care Record and make it work for you! HealthShare Management Resource Guides are now available through InterSystems Learning Services.

Hi,

Took one class room training where instructor told us to attend this 30 minutes training prior to the class but clicking the link https://learning.intersystems.com/enrol/index.php?id=632 shows the following message

Hi:

Sorry I can't find the correct documentation for this. It's very simple I think. 

I open up an XML reader class and correlate the XML to a message type. 

My XML will read something like 

<StatusLastChecked></StatusLastChecked>

This gets correlated into a message with the following property 

Property StatusLastChecked As %String(XMLPROJECTION = "element");

I can use the following to get the other properties out 

i.e. docs.RelayedDocuments.GetAt(i).DateAdded will get the date added properties

When i try for the one with the blank value for the blank entry with a trace I get undefined traced out 

d

Hello!
I’m happy to announce that we have published another course to online learning from the InterSystems Change Control catalog! The course is ICC310: CCR Tier 0 – Usage Basics.

To find all available CCR courses online, go to learning.intersystems.com and search for ICC or just click here.
 
ICC310: CCR Tier 0 – Usage Basics Description:
Learn the transitions and documentation fields for a BASE > TEST > LIVE CCR workflow.It is important to take this course even if you will primarily progress Tier 1 or Tier 2 CCRs because the documentation fields and transitions are common across all CCR Tiers.

Dear HealthShare Customer:

This post is part of the HealthShare HS2020-05 Alert communications process.  The same information is also distributed:

• By Email
• On the Product Alerts & Advisories page
• On the WRC Distribution Page InterSystems Documents

There are 3 alerts in the HealthShare HS2020-05 Alert communication, including the previously posted "Alert: Possible Data Integrity Issues with Online Backup of Large Databases"  The Alert Summary is in the table below, and the detail is contained in the attached document: HS2020-05-Communication

InterSystems has corrected two defects that affect online backup of very large databases. Backups taken via external methods, such as snapshots or direct file copies, are not affected. These defects exist in all released versions of all InterSystems products.

The first defect only affects databases with more than 2³¹ blocks. It results in a degraded database after restoring from an online backup. For example, databases that have a block size of 8 KB (the default) are only affected if they are larger than 16 TB. The correction for this defect is identified as RJF437.

The second defect affects

Hello Community, 

I want to secure a SOAP Webservice (an EnsLib.SOAP.Service one, if that matters) adding a SSL/Username Policy to it. As im not sure how detailed my request here should get, ill try giving a detailed as-is description of my setup, what I've tried, how I tried to test the connection and what problems including some logs I ran into. 

As a small foreword: I'm pretty new to the whole security aspect of intersystems and soap itself. 

System:

I've tried it on 2 different systems with pretty much the same result: 

1. IIS Server with a 2 System-Mirror Healthshare 2018.1.2 Installation
2. loc

Hi, if you develop production with HealthShare, you may have noticed there is a nice tracing feature available - HS.Util.Trace.Operations. This feature allows visually tracing debug information, in structured way. It complements good old logging macros like $$$LOGINFO, $$$TRACE and alike.

I use this feature a lot. However, it has limited functionality, it works nice with classes that extend XML Adapter, streams or data types, but it doesn't work well with arbitrary objects that do no extend from XML Adapter.

I decided to implement a subclass of the trace helper class HS.Util.Trace.Helper and

I have a class that writes to an external SQL Server database.  When the field is empty, it does not write the column and the column has the value NULL.  In some cases, I want the column to be the value of the empty stringinstead of NULL.

Class myRequestClass Extends Ens.Request
{

    Property MessageType As %String

}

The message that is passed to this class shows:

    <MessageType></MessageType>

Which writes the field as NULL with:

    tSQL = "insert into myTable (MessageType) values (?)"

    set tSC = ..Adapter.ExecuteUpdate(.tNumberOfRowsUpdated,tSQL,myRequestClass.MessageType)

I've tried setting

Hi,

I have a HealthShare HealthConnect operation which uses the EnsLib.HTTP.OutboundAdapter. It is using a custom Operation class to send HTTP Post request. The request data that is sent to the operation and the response back from the operation is not  displayed on the visual trace. Is there anyway to display this data in the trace? 

Thank you for your help. 

I’m happy to announce that we have published another course to online learning from the InterSystems Change Control catalog! The course is ICC420: Items and ItemSets. To find all available CCR courses online, go to learning.intersystems.com and search for ICC or just click here. 

Learn to use the Perforce Details pane of a CCR and additional important concepts related to Items and ItemSets that set the foundation for progressing a Tier 1 or Tier 2 CCR. CCR Transport — Items and ItemSets contains seven videos as well as quick quizzes to verify understanding following each video.

Audience:This