• HealthShare Unified Care Record Overview – Virtual  December 15-16, 2025
  
  • Overview of HealthShare Unified Care Record® architecture, data flows, consent, and notifications
  • This 2-day course provides an overview of HealthShare Unified Care Record®. It focuses on architecture, data flows, consent, alerts, user management and terminology.
  • This non-technical course provides an introduction to the product for those who do not need the detail provided in the 5-day HealthShare Unified Care Record Fundamentals class.
  • This course is intended for those needing an understanding of Unified Care

• Building and Managing HL7 Integrations – In PersonDecember 15-19, 2025 9:00am-5:00pm EST
  
  • Build, configure, and manage HL7^® V2 interfaces using InterSystems integration technologies.
  • This healthcare-focused 5-day course teaches implementation partners, integrators and analysts how to rapidly build HL7 integration solutions.
  • Students build a production that processes and routes HL7 messages.
  • Students learn how to work with the pre-built HL7 business services, business processes and business operations to receive and send HL7 messages.
  • Students also learn how to transform HL7

In my previous article, I structured network communications
in these 3 possible layers, and covered the last

• Client <---> Transport
• Server <---> Transport
• Client <---> Server

In fact, you have the most control over the last one.
The IRIS side as a server is yours and under your full control. 
Up to now, the Transport layer was assumed to be as passive as a bare wire.

This assumption should be verified. I once met a Windows environment with
a quite surprising setup where a Firewall-like filter was isolating internal
processes and causing a lot of trouble.

? What can you do about the  Transport

Chasing errors or misbehavior in the network can be quite a challenge.
Differently to  a local application on the DB server, you always have at least 3 players:

• A client  to place a request 
• some kind of transport layer
• and a server to provide a reply.

This results in a minimum of 3 possible communication layers

• Client <---> Transport
• Server <---> Transport
• Client <---> Server

The last one is probably the easiest  to check, while the other 
two deal with the same counterpart just from opposite sides.

?  Do both ends use the same communication protocol ?

I met more than once that one end

Hi,

 I have just installed WebTerminal on my local instance of Health Connect 2025.1, but it does not work and returns a HTTP 401 error.

Can any one help, as I have never installed WebTerminal before?

Has there been any changes in Health Connect to stop it working in version 2025.1?

Thanks.

Neil

You may have noticed that to configure a mirror for InterSystems IRIS for Health™ and HealthShare® Health Connect there is a special requirement. I wanted to go through it step by step in this article.

This assumes you have already configured the second failover member and confirmed a successful failover member status in the mirror monitor:

Step 1:Enable HS_Services user (on backup and primary) 

Step 2: Switch to Namespace HSSYS and go to Interoperability > Configure > Credentials. Enter the Password for your predefined HS_Services user (on backup and primary)

Step 3: Schedule the Mirror

I would like to share with you a little trick to customize how messages are displayed in the Message Viewer. In particular, how you can display messages as JSON (instead of the default XML representation).

Messages are objects that are used to communicate interoperability productions components. In my example I have defined a message that later I serialize as JSON to send to an external API. This message is defined as a regular message and also as a %JSON.Adaptor so I can export / import directly to or from JSON.

Class interop.msg.DeviceOrderReq Extends (Ens.Request, %JSON.Adaptor)
{

Parameter

Can someone give me an explanation of how Local.PD.Linkage.Definition.Individual works? This was setup by another company as part of our implementation.

Below is my configuration..

We are getting a lot of matches on Given Name, but then the Family Name does not match at all, so I am wondering if these need to be adjusted. I just don't understand if they need to be positive or negative.

if I use the MLE CALIBRATION MONITOR, it seems that none of the values should be negative.

Hi everyone, on HealthShare Unified Care Record 2024.1.0 Build, we're using the Analytics section to create a dashboard containing a time chart showing a cumulative curve of the number of documents indexed in the registry for each documentSource of each repository.We tried the following steps: we created a cube whose dimensions are the CreationDate, SourceValue, and repositoryUniqueID of the HS_Registry.Document table; in the Analytics section, we created a pivot table that lists the document creation date on each row, along with as many columns as each repository's documentSources.

Hello, thanks for your time reading this question.

We are receiving each day, alerts from one of our four Production nodes. It always has the same text:

[InterSystems IRIS SEVERE ERROR gchciris4.canariasalud:ENSEMBLE] [Utility.Event] [SYSTEM MONITOR] CSPGatewayLatency(127.0.0.1:443) Alert: CSPGatewayLatency = 5001.304, 5001.233, 5000.964 (Max value is 2000).

We have looked for it in the documentation here:

https://docs.intersystems.com/latest/csp/docbook/DocBook.UI.Page.cls?KE…

We thought it was related to the following paragraph:

"Server Response

When using a EnsLib.RecordMap.Service.FileService business service, is there a way to tell which row number that is being read in? I want to read in a csv, but on the first record, trigger a truncate on the External SQL Table that it is being written to through JDBC.

Thanks

Scott

Overview

This release introduces the FHIR Server 2025.10.0, delivering the latest standards compliance and performance improvements. It also enhances the Health Connect Cloud (HCC)upgrade process for greater reliability and adds new flexibility to Network Connect through prefix list support in VPN configurations.

New Features and Enhancements

Hi, Community!

Looking for an efficient way to allow providers to see whether prior authorization is required? See how the Coverage Requirements Discovery (CRD) module of the InterSystems Payer Services ePrior Authorization solution can help:

Coverage Requirements Discovery

<iframe allowfullscreen="" frameborder="0" height="360" src="https://www.youtube.com/embed/MY1If1CEjrM?utm_source=youtube&utm_medium=social&utm_campaign=MY1If1CEjrM" width="640"></iframe>

What is XML?

XML(eXtensible Markup Language) is a flexible, text-based, andplatform-independentformat used to store and transport data in a well-structured way that is both human- and machine-readable. XML permits users to define custom tags to describe the meaning and organization of their data. For example: <book><title>The Hitchhiker's Guide</title></book>.

An XML document is self-descriptive and structured as a hierarchical tree of elements.Every document has a single root element that encapsulates all other content.

There is documentation for single dolalr macros but $$$ dollar seems to be referenced on individual pages or not at all.

Introducing IRIS DocDB Explorer: A Sleek UI for Managing JSON Documents in InterSystems IRIS

IRIS offers a dedicated feature for storing and retrieving JSON documents using DocDB, without requiring a predefined schema.

Developers often need a quick and intuitive way  to browse, create, and edit documents without switching between multiple tools or writing repetitive code. To solve this, I creatediris-docdb-ui — a CSP-based open-source application that provides a clean, responsive interface for interacting with DocDB effortlessly.

Hello,
I am currently facing the task of retrieving or sending HL7 messages from a web API. Since we only send HL7 messages via internal sockets, web APIs are relatively new to me.
The following is my plan for the new interface:
I have created a new custom business service that periodically sends requests to a business process.In this business process, the HTTP request (HTTP.GenericMessage) is then created from scratch.The special feature is the "Authorisation" header field, where a signature is inserted, which consists of a base64-encoded hash value.

InterSystems ObjectScript extension for VS Code, version 3.0.1

Am also asking this question on the extension's GitHub page: Request textDocument/documentSymbol failed. Error: name must not be falsy · intersystems-community/vscode-objectscript · Discussion #1530 - but suspect more eyes will see it here, which might help gather additional information.

Tried to compile some legacy ObjectScript code via Import/Compile in VS Code using the vscode-objectscript extension. Getting an error, and the content of the file is left changed on the filesystem simply by being compiled.

We think the error occurs

We are trying to mark a hl7 nack as "completed" to ignore an error and not generate the alert. 

We can remove from adding a managed alert or add another router in 

When Nack of CR of 

Date of birth in PID.7 must not be empty

We tried via this but i think it's only for an actual IRIS alert errror not the HL7 error code/description 

E*Date of birth in PID.7 must not be empty=C,:?CR=C,:?R=RF,:?E=S,:~=S,:?A=C,:*=S,:I?=W,:T?=C

Real Time FHIR® to OMOP Transformation

This part of the OMOP Journey,  we reflect before attempting to challenge Scylla on how fortunate we are that InterSystems OMOP transform is built on the Bulk FHIR Export as the source payload.  This opens up hands off interoperability with the InterSystems OMOP transform across several FHIR® vendors, this time with the Google Cloud Healthcare API.

Google Cloud Healthcare API FHIR® Export

GCP FHIR® Datastores support bulk fhir import/export from the cli or api, the premise is simple and the docs are over exhaustive, we'll save a model the trouble of

I am regularly contacted by customers about memory sizing when they get alerts that free memory is below a threshold, or they observe that free memory has dropped suddenly. Is there a problem? Will their application stop working because it has run out of memory for running system and application processes? Nearly always, the answer is no, there is nothing to worry about. But that simple answer is usually not enough. What's going on?

Consider the chart below. It is showing the output of the free metric in vmstat. There are other ways to display a system's free memory, for example, the free -m co

Hello community,

I wanted to share my experience about working on Large Data projects. Over the years, I have had the opportunity to handle massive patient data, payor data and transactional logs while working in an hospital industry. I have had the chance to build huge reports which had to be written using advanced logics fetching data across multiple tables whose indexing was not helping me write efficient code.

Here is what I have learned about managing large data efficiently.

Choosing the right data access method.

As we all here in the community are aware of, IRIS provides multiple ways to access data. Choosing the right method, depends on the requirement.

• Direct Global Access: Fastest for bulk read/write operations. For example, if i have to traverse through indexes and fetch patient data, I can loop through the globals to process millions of records. This will save a lot of time.

Set ToDate=+HSet FromDate=+$H-1ForSet FromDate=$O(^PatientD("Date",FromDate)) Quit:FromDate>ToDate  Do
. Set PatId=""ForSet PatId=$Order(^PatientD("Date",FromDate,PatID)) Quit:PatId=""Do
. . Write$Get(^PatientD("Date",FromDate,PatID)),!

• Using SQL: Useful for reporting or analytical requirements, though slower for huge data sets.

Hello InterSystems Community,

I hope you're all doing well. I'm reaching out to ask if there's any way to enable a dark theme or dark mode for the HealthShare Management Portal.

Background

I have a visual impairment (amblyopia/lazy eye) which means I'm nearly blind in one eye. Like many people with visual difficulties, I find that bright white backgrounds and interfaces cause significant eye strain and fatigue. This makes it challenging to work with the Management Portal for extended periods.

What I've Found So Far

I've searched through the community forums and documentation, but I've only found

Starting out with ObjectScript, it is really exciting, but it can also feel a little unusual if you're used to other languages. Many beginners trip over the same hurdles, so here are a few "gotchas" you'll want to watch out for. (Also few friendly tips to avoid them)

NAMING THINGS RANDOMLY

We have all been guilty of naming something Test1 or MyClass just to move on quickly. But once your project grows, these names become a nightmare. 

➡ Pick clear, consistent names from the start. Think of it as leaving breadcrumbs for your future self and your teammates.

MIXING UP GLOBALS AND VARIABLES

Globals (^G

Hi Team, 

Can I please check if anyone has built a simple web interface for maintaining custom SQL lookup class.   

We have a simple persistent class in HealthShare which is used for storing Pathology test codes. Test codes in this lookup class is used for message filtering and applying additional logic when processing pathology results/orders. 

We want to make this class available to external users from pathology (not the usual management portal users) to maintain so that they can add/edit/delete test codes as required. 

Has anyone implemented something similar to expose the HealthShare SQL

Overview

This web interface is designed to facilitate the management of Data Lookup Tables via a user-friendly web page. It is particularly useful when your lookup table values are large, dynamic, and frequently changing. By granting end-users controlled access to this web interface (read, write, and delete permissions limited to this page), they can efficiently manage lookup table data according to their needs.

The data managed through this interface can be seamlessly utilized in HealthConnect rules or data transformations, eliminating the need for constant manual monitoring and management of the lookup tables and thereby saving significant time.

Note:
If the standard Data Lookup Table does not meet your mapping requirements, you can create a custom table and adapt this web interface along with its supporting class with minimal modifications. Sample class code is available upon request.

The Istio Service Mesh is commonly used to monitor communication between services in applications. The "battle-tested" sidecar mode is its most common implementation. It will add a sidecar container to each pod you have in your namespace that has Istio sidecar injection enabled.

It's quite easy to get started with, just put the istioctl executable in your PATH, and label your namespace such that it tells Istio to acitvate side car injection there.

>> kubectl get po -n iris
NAME                                              READY   STATUS    RESTARTS        AGE
intersystems-iris-operator-amd-858

I have a custom defined priority field that is being stored as a number type

<record name="LocalClinicalMeSHTerms" type="serial">
<field name="LocalClinicalExpertiseCodedValue" type="{CODETYPE}" codeFamily="HSPD" codeTable="LocalClinicalExpertise" codeScheme="{MASTER}"/>
<field name="LocalCliniclDisplayOrder" type="number"/>
</record>

However, within the overviewIndividual.cls form

				{
					"type": "HSPD.collection",
					"key": "LocalClinicalMeSHTerms",
					"hideExpression": "formState.lib.hideField(formState) && model.LocalClinicalMeSHTerms==''",
					"templateOptions": {
						"labe

Deploying new IRIS instances can be a time-consuming task, especially when setting up multiple environments with mirrored configurations.

I’ve encountered this issue many times and want to share my experience and recommendations for using Ansible to streamline the IRIS installation process. My approach also includes handling additional tasks typically performed before and after installing IRIS.

This guide assumes you have a basic understanding of how Ansible works, so I won’t go into much detail on its fundamentals.

UPDATE: since version 0.0.4 of the extension was published on 2025-11-23 it is now possible to use gj :: configExplorer directly in VS Code on Windows.

In my previous article introducing gj :: configExplorer I flagged up how an apparent bug in the Windows elements of the Native API for Node.js means it's not currently available to run in VS Code on a Windows desktop. In a comment on that article I offered a workaround, but this requires a Docker-equipped Linux host you can SSH to.

If you don't have a suitable target it's now possible to leverage your local Windows Docker Desktop. Here's how:

1. Op