#HealthShare

I am currently studying for the HealthShare Health Connect HL7® Interface Specialist exam. Does anyone have any tips? 

Thank you!

Hi everyone, 

I am currently performing a patient merge thorug ADT^40 HL7 messages. In order to do that, I am following this guide which I found on the ducumentation: http://10.41.11.210:57772/csp/docbook/DocBook.UI.Page.cls?KEY=HESUP_ch_IHE#HESUP_IHE_configuring_registry_PIX
My main issue regards the fact that I can't update the PatientID and the SourcePatientID of the HS_Registry.Document table of the prior patient, wheras, I find only the new anagraphic on the HS_Registry.Patient table.

To do that I have created a process in my BUS prodaction which create the MergePatietRequest to send to

Hi All,

Can you please guide me on how to programmatically write objectscript task to export audit log to a directory and what type of task should I set it to.

I want to achieve the same behaviour on the code as seen below 

Hi guys, I am not able to load the file codes on the terminology registry, do you know how the structure should look like when uploading terminology codes file under Registry namespace

Below is the error I am getting the below error

Hi All,

I have been given the following  xml  class file with objectscript code that has methods that I need for file conversions. These method implementations will do necessary conversions but I don't know how to add it to Iris studio and run it as a task or maybe if it must be  put  on any location and call each method from the terminal and even if so how do I then call it.

Please advise how to go about this.

<?xml version="1.0" encoding="UTF-8"?>
<Export generator="IRIS" version="26" zv="IRIS for Windows (x86-64) 2020.1.1 (Build 408U)" ts="2022-02-01 16:19:05">
<Class name="User.Ready.C

Hi All,

We have a requirement for one webpage that should be access  in our VPN with out authentication. If it asks user name password that also fine.

This page should be a dashboard for the  ensemble health monitoring. Support Team seating Area we have big SMART Monitor which always shows this webpage. Support engineers keep on eye on this monitor, if it shows action required then .  they will act upon immediately. Expecting some widgets like  

• Queue Status
• Inbound application status
• Out bound operations status
• Database statistics 
• Mirror Information

etc.

I can see some widgets i

Hi Community,

Anybody has used NHS 111 API in healthshare - ITK ?

We need more details on this API, please share any kind of info regarding it.

Thanks,

Prashanth

I am attempting to delete the entirety of the translation map for a single facility and am wondering if there is a utility within InterSystems to accomplish this. 

Thanks for any info

I have number of hosts on an Ensemble production that are not updating the %LastActivity property in the

^CacheTemp.EnsHostMonitor global. This in return create an issue with our dashboard software which is showing wrong results even as the host is processing messages without issues.

Hello, good morning

First thank you for your time in reading and answering our question.

We have been reading, inquiring, researching about how to make multiple dispatches from 1 Process of type "DICOM.BP.QueryProcess" to several target Operations.

We need some help to further develop this use case, and some advice 🧭, examples or recommendations

Currently we are using the basic example, the one that includes Ensemble, and this has DICOM Process which has a property by which from Web Production we write to which Operation it sends our FIND/QUERY/RETRIEVE messages:

The circuit is shown gr

Hi Community,

When we terminate a process that is in a transaction, the system (fortunately) performs a rollback.

As part of some troubleshooting, I'm wondering if there's a way around this behavior to avoid rollback (or force commit) before termination.

Recently we had an issue on a test server with a process stuck in a huge transaction (around 100GB).

The out-of-control process was suspended and then terminated causing a rollback.

In the case of a test server, this is not really a problem.

If it happens on a production system, depending on the situation we might prefer to avoid rollbac

This post is part of the HealthShare HS2022-01 Alert communications process.  The same information is also distributed:

• By Email
• On the Product Alerts & Advisories page
• On the WRC Distribution Page InterSystems Documents

There are 22 alerts in the HealthShare HS2022-01 Alert communication.  The Alert Summary is in the table below, and the detail is contained in the attached document: HS2022-01-Communication

I have a Business Service that reads a file from a folder and sends it as a string to a Business Process. In the business process, I need to add a string to the end of the file string that is coming into the Business Process. I am trying to do this in object script in studio and I am struggling to figure out how to add the string to the end of the other string. I am still new to studio and object script I have been reading up on the documentation and I am not sure what is the best way to accomplish this.

Any help would be greatly appreciated. And I would be happy to answer any question you ha

I am new to Intersystems, in our project we are directly connecting to the server (environment) using  Intersystems VSCode extensions and publishing our changes from local machine. This is not the way we usually do as development process.

Is it possible to implement continuous integration ? So that developers can check-in their code in GIT Hub and can integrate Jenkins and automate the deployment?

Could you please help me on this ?

Hello,

I am working on the new USCDI Requirement to store LOINC Codes/Descriptions for various types of Clinical Notes in the SDA.

According to all of the documentation I had been able to find, in order to store a coded value for Document Type, I have to use Custom Pairs:

#; Code System
        do ..write(cr_"<CustomPairs")
        do ..write(cr_"<NVPair>")
        do ..write(cr_"<Name>DocumentNameCodingStandard</Name>")
        do ..write(cr_"<Value>LN</Value>")
        do ..write(cr_"</NVPair>")
        #; Code
        do ..write(cr_"<NVPair>")
        do ..write(cr_"<Name>DocumentNameCode</Name>

Hello Community,

I am still pretty new to Ensemble, Cashé, or ObjectScript. My question is this how can I tell when a file was finished and read fully? Currently, I have an EnsLib.FilePassthroughService reads a file from a designated file path and moves it to an archive file path. I need to set up an alert or a notification that can tell me once the file has been read in its entirety and has been moved out of its current file path.

Any help you can give me would be greatly appreciated, or if you need further clarification I can do my best to answer any question you have. Thank you. 

Hello Community!

Is in objectscript way to get all properties names from HL7 Message?

For example I have HL7 message:

MSH|^~\&|MIHIN PATIENT GEN|1.2.3.4.5.9.99.999.9999.1004||2.16.840.1.113883.3.1481|20200103000000+0000||ADT^A01^ADT_A01|1092|P|2.6|1091|||||||||Windward General Hospital
EVN||20200110000000+0000|||||1.2.3.4.5.9.99.999.9999.1004
PID|1|3170|44c8a6bba5c743538e476a813256959b^^^^CKS~000003170^^^^SS||Santana^Pearl||19900609|F||2054-5^Black or African American^HL70005|364 NE Oak Circle^^Trenton^MI^48183||||||||000003170|||N^Not Hispanic or Latino^HL70189|||||||20200110000000+0000|

Good morning,

First of all, thank you very much in advance for reading and responding.

Also, thank you for any support, because it is a relief, support, contribution, help to have people with more understanding, knowledge and practice, reading, and thinking this doubt.

There is the following need:

Two 2 circuits are available:

1st DICOM Circuit of "Studio" ( Classic Service ).

Service: class: DICOM.BS.QueryService

Process: class: DICOM.BP.QueryProcess

Operation: class: EnsLib.DICOM.Operation.TCP

We test from the "Console" of the "Studio" by means of:

do ##class(DICOM.BS.QuerySer

Hi:
The task Mirror Monitor Launch Task recently failed and is placed in Suspend leave. Although it says USER it is not known as a task for us. 

The code runs is HSSYS which is not our main system or namespace for production items. 

The task name is HS.Util.Mirror.Task runs 

If $system.Mirror.IsMember() Do ##class(HS.Util.MirrorMonitorAgent).StartAgent() and just says the description 

/// This is the task definition that Launches the mirror monitor on any mirrored instance

I don't understand why this task runs or what it does. I assume it has just suspeneded as the startAgent() failed. 

W

InterSystems has corrected a defect that causes incorrect ObjectScript routine compilation.

This defect exists only in the recently released 2021.1.1 version of:

            InterSystems IRIS Data Platform

            InterSystems IRIS for Health

            HealthShare Health Connect

InterSystems recommends that 2021.1.1 not be used. Incorrect routine compilation occurs silently and can cause unpredictable logic execution. 2021.1.1 versions have been removed from distribution channels.  In the very near future, InterSystems will post a version of the impacted products that corrects the d

Hi everyone,

Does anyone have any experience / examples of converting an .rtf file into an HL7 message (ORU^R01). My example is a histology report which is placed on a server to pick up and then convert if possible for downstream systems who receive HL7.

Struggling to find any sort of examples or even whether its feasible at this stage - there are certainly better knowledged people on here than me so thought id ask.

With thanks

Warren

Please, I am having trouble connecting to one of several Health Share servers using ISC's Visual Studio Code add-on.

Installation seemed to go smoothly.  I have InterSystems's Studio and was able to automatically pull in my existing connections.  However when I try to make a connection it fails.  

Here is a configuration of one connection slightly edited for security:

        "xxxx-hsiecommon-base": {

            "description": "This has been created by the CCR system export.",

            "username": "therock",

            "webServer": {

                "host": "mongo.il.intersystem

Hello Everyone,

The Certification Team of InterSystems Learning Services has updated exam objectives for our HL7 Interface Specialist certification exam and we need input from our implementation community.  

How do I provide my input? We will present you with a list of job tasks, and you will rate them on their importance and other factors.  

How much effort is involved? It takes about 30-45 minutes to fill out the survey. You can be anonymous or identify yourself and ask us to get back to you. 

How can you access the survey? You can access the survey here  

Note: Your answers cannot b

Hi Community, 

Get a first look at InterSystems HealthShare's next-generation healthcare decision support and notification capabilities:

⏯ Introducing InterSystems HealthShare Extended Decision Support

i'm trying to extend both the MemberEnrollment and the MedicalClaim objects in HS.  The CareProvider is perfect for some of my extensions (Operating provider, referring provider, third-party insurer), but the documentation says https://docs.intersystems.com/irisforhealthlatest/csp/docbook/DocBook.U…:

I need something that is just like a CareProvider, and I will be using the CarePRoviderType as a CodeTableDetail.  

Why is CareProvider excluded?  Does this mean I can't add property HS.Local.SDA3.MemberEnrollment.PHPProvider as HS.SDA3.CodeTableDetail.Ca

This message links to 14 recent advisories that were posted on the InterSystems Product Alerts and Advisories page. All of the items affect HealthShare products, and the first three items affect InterSystems IRIS for Health as well.

1. FHIR Search with an Assigning Authority but no Identifier Omits Results

2. Some FHIR Queries that use _include and _revinclude Fail Silently

3. FHIR Queries May Omit Results

4. FHIR Queries that Specify a Quantity but no Units of Measure Return Incorrect Results

5. Time Zone Offsets not Applied to FHIR Resources

6. FHIR Searches that Specify a Time Range may I

After what is seemed was weeks, I finally got SSL/TLS enabled on both Apache Web Server and IRIS using the Web Gateway. However while we can now use HTTPS to connect to our Development instance of IRIS, I am running into several errors when I have others try to access the Management Portal via HTTPS.

We are seeing...

• "Unexpected status code, unable to process Hyper Event: Internal Server Error (500)"
• Server Unavailable

Does anyone have a Optimal settings list that I need to set for Apache/Web Gateway https? I am assuming the errors listed above are some kind of time out or settings som

Hello Community, 

Could anyone let me know the process to change segment/message terminators Eg: CR -> CRLF etc. inside the DTL ? 

Thanks