I have created a FHIR endpoint and send the FHIR resource to FHIR Interoperability production class which is HS.FHIRServer.Interop.Service through the the created endpoint(/r4). I can able to see/get the HS.SDA3.QuickStream(It use CacheTemp.HS.Stream temporary global) on the fly(In between the process). I'm unable to get the FHIR resource from the QuickStream once the process completed. Is this HS.SDA3.QuickStream is wiped out from the system once process completed?

0 1
0 77

Hi everyone,

I have a question related to a strange issue I've been experiencing over the last few days.

Context

I'm attempting to create an automatic resending system that, if no reply is received from the server, raises an error and re-sends the message. This process continues for the a duration defined by the FailureTimeout (e.g., 20 seconds), and a new message is being sent every 5 seconds until the FailureTimeout is reached. If no response was obtained from the server, the system returns an error.

0 2
0 103

Good morning
Thank you for taking the time to read this issue.

In interoperability environments, in what way is it recommended to monitor and detect changes in Web Production components between environments, for example between Pre-Production and Production, or even between alternate Nodes of Production Mirrors?

We ask this question in order to find out what are the best practices, and what is the most methodical, systematic, simple, robust and secure way to perform this monitoring.

1 17
0 277

Hello!

I'm currently trying to setup a SFTP Ensemble production to handle all of my SFTP transactions. It's been going well, but I'm currently running into an issue where it is saying it is unable to exchange encryption keys. Error Below:

Unable to exchange encryption keys [80101005] at Session.cpp:238,0' matched ReplyCodeAction 1 : 'E=R' resulting in Action code R

Any advice on getting around this would be appreciated.

0 3
0 65

I created a web service and used the Studio SOAP Wizard to generate a client from the WSDL file of the service. But the client is throwing the error as shown below

WebServiceClientClass '' could not be instantiated, or the WebServiceURL Location could not be determined

What have I missed?

Is there a better way to create a client?

0 2
0 75

We need to generate a PDF file from an HL7 message as it passes through an Ensemble production. Looking for examples, tutorials, documentation aligned to our scenario.

We are currently using Ensemble (so can't use InterSystems Reports at the moment). Thinking Zen reports...

We can get from HL7 to XML OK, following Introduction to InterSystems Health Connect - YouTube (see c.1:11:00-1:13:00)

0 1
0 46

I have been successfully able to transform hand-written medical test results documents to HL7 ORU_R01 v2.x, then to SDA, which will be trasformed to FHIR or C-CDA.

However, I have a category of documents which contains reference range in multiple date formats, which are measured for each gestation period.
For example, below is one of the documents.

Analyte: HCG, Value: 1968, Unit: mlU/mL

0 4
0 101

Dear experts,
Please, could you give me any tips about it?

I have two servers (primary and secundary, both are mirroring members) configurated:

primary: SOROSERVER1/HSFOUNDATION2014
secundary: SOROSERVER2/HSFOUNDATION2014

I turned off server "SOROSERVER1" and tried failover to server "SOROSERVER2", but is returning a lot of errors in log (cconsole).
Below are messages saved in cconsole log.

0 3
0 104

Hello,

We currently have the following scenario: We have a bussiness SOAP Operation, where we get a SAML String and we convert it into a %SAML.Assertion object correctly.

👩‍💻👨‍💻 We would need to send the SAML Assertion inside the SOAP Header to the Target System.

First of all thanks for reading, and thanks for answering.

We currently have opened Log Soap and we do not observe it being added to the SOAP Header, as you would observe in the following Log Soap:

0 1
0 93

Good afternoon,

first thank you from heart and mind, mind and heart; for reading, thinking, reflecting, responding, and above all explaining a possible solution and/or documentation to address this doubt.

We would need a way to get inside a SOAP Web Service the SAML Assertion, and then, send it directly to the endpoint throught a SOAP Operation.

Currently we have researched and developed how to get the SAML Assertion with the following code:

0 1
0 101

Good morning,

I was wondering:

Given the following scenario where we have a string where each two items are being splitted by "|" as follows: "squadName|initialLetter"

"Alfa|A|Bravo|B|Charlie|C|Delta|D|Echo|E|Foxtrot|F|Golf|G|Hotel|H|India|I|Juliett|J|Kilo|K|Lima|L|Mike|M|November|N|Oscar|O|Papa|P|Quebec|Q|Romeo|R|Sierra|S|Tango|T|Uniform|U|Victor|V|Whiskey|W|X-ray|X|Yankee|Y|Zulu|Z"

And we would need to generate a String structure like:

0 4
0 185
Question
· May 12
TCP Error

Hi Everyone,

I tried to send the Sample XML from Packet Sender to Intersystems IRIS TCP Inbound adapter for learning purpose.
I'm using Predefine d Class : EnsLib.XML.TCPService and the adapter is EnsLib.TCP.CountedInboundAdapter (it selected by Default.)
My sample XML file would be <Patient><Name>John,Williams</Name><MRN>12345</MRN></Patient>
I got an error like

0 3
0 105

Please help,

I'm using a SearchAndFetchRequest to retrieve a full SDA3 Container from the ACCESS gateway. The response is presented in the pResponse.SearchAndFetchGeneralResult.XMLData property. This property is of type string. I want to put the data from this property in a HS.SDA3.Container and then use this container is a dtl for translation purposes. My current data in the XMLData property is too large to fit in a string. Therefore I'm searching for a way to convert te data to a stream and that import the stream into my Container...

0 2
1 101

Dear experts,
Please, could you help me?

Im trying import a global:

ACB> K ^GlobalManualSend
ACB> D $System.OBJ.Load("C:\Users\BNAPC\GlobalManualSend.xml")
ACB> Set sc = ##class(%Studio.Project).InstallFromGbl("^GlobalManualSend","fv")

But is returning a error about version:

Please, could you help me about it?

Thank you.

0 5
0 164