#Ensemble

How to develop an interoperability solution in one code base and then use it to generate many individual interfaces

Overview

In 2009 I wrote the first of several Interfaces for LabTrak.The Interfaces allowed existing National Health Laboratory Services (NHLS) clients to send Patient Demographics and Orders to LabTrak.LabTrak would, in turn, send the results of those tests back to the client.I wrote 3 or 4 at the time and an Interface that fed data from LabTrak into the NHLS Corporate Data Warehouse.

Hello community,

It would be appreciated if you could read and respond to us:

➡️ We need to activate a SOAP Operation during a time slot, in order to send messages to the target system, only for a few hours; for example from 4am to 8am.

The requirement is to do this without a scheduled task. This is because when changing nodes, in the production mirrors, there are difficulties, challenges, or issues with scheduled tasks.

Therefore, we need a mechanism that allows us to ensure that the Operation is executed even after a node change.

Please could you point us to documentation, code samples,

Hi Guys,

I've bind a textarea to show up in a tablepane cell and it's working fine as follow:

this the column injh question:

    <column colName="FollowUp" header="FollowUp Comments" width="9%" style="text-align:left;" OnDrawCell="txtFollowUp"/>

txtFollowUp method:

Method txtFollowUp(pTable As %ZEN.Component.tablePane, pName As %String, pSeed As %String) As %Status
{
    &html<<textarea name="followup" name="followup" rows="3" text="#(%query(pName))#" style=" width: 95%;" onchange="zenPage.saveFollowUp(this,#(%query("id"))#);">#(%query(pName))#</textarea>>
    Quit $$$OK
}

and 

the client method

I am receiving the following error in my buisness operation:

ERROR <Ens>ErrException: <UNDEFINED>zGo2+181^mb.MbMainOperation.1 *tSC -- - registered as '-' number - @' set pResponse = ##class(mb.MbMessageResponse).%New()'

From what I understand, the problem occurs in the generated int file mb.MbMainOperation.1 in the method zGo2, with the offset of 181 lines, and the variable in question is a local variable tSC.

However, the line where the error occurs does not refer to tSC in any way

set pResponse = ##class(mb.MbMessageResponse).%New()

I even went as far as to set the variable at the very start

Hi Guys,

is there a way to include a datetext in a tablepane cell maybe using OnDrawCell?

I've tried :

    &html<<input type ="date" id="serialno" style=" width: 80%;" />>

but doesn't work with IE 11 and under, so it would be good if I can include datetext component instead.

Thanks

Hi Developers! As part of an internal company hackathon at InterSystems, I'd love community feedback on a few topics. Feel free to chime on any/all of these via comment or direct message to me.

1. If you were to launch a new application/project, what problems would you need to solve right off the bat? What technologies would you use? Why?
2. What are the most common and repeated problems that you find yourself solving?
3. Where in InterSystems' technologies do you spend most of your time?
4. In a solution you have recently implemented, how were your time/efforts allocated?

Hi all.

I'm trying to create a route rule that can call to a web service according to a parameter of a message.

My first attempt is the following:

I have a common class with all information, BuscarHuecoRequest, and check what is the value of property "CodigoProveedor".

The table T_PROVEEDOR contains the list of code with the code of the provider, if is F, calls to WSF, if is C, calls to WSC, etc... Using a transformation to convert the values to this provider.

It raises an error, because the property CodigoProveedor doesn't exist.

I've debugged and I see the following code:

I evaluated the variable p

Does Intersystems specifically Ensemble support a Single Sign On architecture? Currently we are using Delegated sign on using LDAP and TLS, however our CIO would like us to move toward a single sign on, so when you sign into your PC it would automatically pass the credentials to Ensemble.

Thanks

Scott

Hey community, how are you doing?

How do you exercise your creativity? How do you test new ideas?

Over the years I have always thought about creating new things, modifying existing ones, experimenting, testing, breaking (it always happens), building again, starting over.

The contests promoted by InterSystems are an excellent source of motivation, obviously, the prizes bring a lot of attention and this you cannot deny.But not just prizes/rewards, they also give us a creative challenge, an opportunity to create, reimagine, test, experiment.

So we are in the midst of setting up a bunch of sFTP operations where we will have Ensemble send files to our various customers.

My questions about the set up are these:

1) For a simple test, I set up an Operation using EnsLib.FTP.PassthroughOperation.  Is this the one I should be using?

2) if the receiving system has a username and password, then all I have to do is put that username and password into a Credential and assign that credential to my operation correct?

3) if the receiving system's directory is just the root directory, do I need to put anything in File Path?

4) Since this is an sFTP,

We receive a JSON message containing an element which is larger than the system long string size.We are using Ensemble HealthShare v2017 which prevents us from using the %GET method as it doesn’t allow us to define the output as a Stream.We are instead trying to the read the contents of the JSON message using Readline function, and store the value into an instance of the %Stream.GlobalCharachter class, and then read from the instance of that class and write the contents of that element into a HL7 Message.

Hi Guys,

How can I programmatically change the font colour in column in tablepane, for example to text in a specific column to be red, maybe that could be done in  %OnAfterCreatePage or  OnDrawCell ?

Thanks'

What is the difference between EnsLib.EDI.XML.Service.FileService and EnsLib.XML.FileService? 

Hi Guys,

my understanding that Arrow can't be used in left or right joins as the example below, so is there an alternative ? 

SELECT Sample.Employee.Name, Sample.Company.Name AS CompName
FROM Sample.Employee LEFT OUTER JOIN Sample.Company
ON Sample.Employee.Company->Name = Sample.Company.Name

Thanks

Hello, I wonder if we can run SQL queries to find data in Lookup tables?

Once a week we are attempting to load an XML file from Workday into a MS SQL table using JDBC and Store Procedures.There is approx 102999 records in this XML file.We are struggling with processing the entire file within a reason amount of time.We feed the XML through a BPL to then populate values in a stored procedure then call the stored procedure through a Business Operation.I have tried splitting out the Business Operations to make two calls, but we still continue to see an issue loading the XML into MS SQL.

Hi,

I have very recently started to work with Ensemble and have both the 2014 and the 2017 version. 

To learn, I have created a small test flow that takes an xml file using EnsLib.EDI.XML.Service.FileService, sends it to a Process that transforms it with xslt into another format, and then passes it onwards to a EnsLib.EDI.XML.Operation.FileOperation Business Operation. 

This is the code that I have before and when sending it onwards:

set tStatus=##class(%XML.XSLT.Transformer).TransformStreamWithCompiledXSL(xmlStreamObj, tCompiledStyleSheet, .pOutput, err)
If $$$ISERR(tStatus) quit tStatus
if $$$IS

I need to remove content below, from PID-3/HL7 message, in IRIS. However, I need to keep the content in PID-3.1. For example, I’d need to keep only, “5050532”. Can this be done in Data Transformations? If yes, how?
Thank you!

MSH|^&|TEMPUS|TEMPUS LABS|EPICEMR|YRMC|20210930100824||ORU^R01|4823623379495310173|T|2.3| PID|1||5050532^^^YRMC09abefb8-872b-4147-8e4b-77463bb235cb^^^^TEMPUS||

Ensemble Log lost connection to arbiter, but no log in Windows, how to confirm connection did lost?

Hello Everyone ,

From Serial Device , i am getting only <CR> as line terminator , but ensemble expects <cr><lf> as line terminator . I couldnt change Line Terminator values in parser . Need help please

Thanks

Shilpi 

Hi,

Production is not auto starting even by adding  <Production Name="myProd.Production" AutoStart="1"/> in installer.cls file:

Thanks

First of all thanks for your time reading this question, and thanks for your help

We have the following use case: we would need to send with MTOM a zip which contains a csv

We have read:

https://docs.intersystems.com/irislatest/csp/docbook/DocBook.UI.Page.cl…

https://docs.intersystems.com/irislatest/csp/docbook/DocBook.UI.Page.cl…

https://docs.intersystems.com/irislatest/csp/docbook/DocBook.UI.Page.cl…

We would need to replicate how SOAPUI does send a zip with a csv as an attachment in a SOAP request, using Ensemble

Being the raw tags as

Hi guys,

how to clear selection in a table pane?

Thanks

The latest release of Serenji focuses on the debug experience. Not only can you now debug on the spot, no matter where you are or what you're doing, but we've also added some smaller features that will make debugging more straightforward. 

• Run and Debug CodeLenses - clickable links above each class method, procedure, subroutine or extrinsic function.
• Intuitive prompting for entrypoints and arguments - when debugging a class method, produce, subroutine or extrinsic function. 
• Shaded read-only background - to clearly differentiate between documents which are editable and those that are read-only. 
• Program output in debug console - output is shown in the debug console. 
• Serenji commands on Server Manager's namespace trees - allowing you to launch Serenji through Server Manager. 

Find out more in our release notes here. 

Class abc.abcmh [ DdlAllowed ]
{ClassMethod FetchMsgCount() As %Integer
{
    set msgCount=-1
&sql(SELECT count(ID) INTO :msgCount FROM Ens.MessageHeader)
If SQLCODE=0 Quit msgCount
Quit SQLCODE
}
 

This class method always giving -30 , means Table does not exist.

note: my namespace extends %sys

Hi,

I have CSV file in github repository. I want to import CSV file data into container class during running container. 

Thanks

Hello All,

InterSystems Certification has redesigned their IRIS Integration certification exam, and we again need input from our community to help validate the topics. Here's your chance to have your say in the knowledge, skills, and abilities that a certified InterSystems IRIS Integration Specialist should possess. And, yes, we'd like to hear from you Ensemble users as well!

Here's the exam title and the definition:

InterSystems IRIS Integration Specialist

An IT professional who:

• designs and builds integrations for various industries, and
• manages and configures productions using InterSystems

Hi developers, 

We've incorporated VS Code's support for multiple concurrent debug sessions and consoles into the latest release of Serenji. 

So if you're working with processes that relate or are dependent on each other, you can now debug them together. Just launch a second Serenji debug session (F5) whilst the first one is still active. 

This short video below shows how it works. We hope you find this feature useful! 

Laurel 

This training course is addressed to beginners who would like to discover the IRIS Interoperability framework. We will be using Docker and VSCode.

The most recent release of Serenji features our innovative gj::locate technology. It was a standalone tool we originally created for a Developer Community contest earlier this year, but we've incorporated it into our debugger after some great feedback from developers. 

It works by navigating you directly to the source of your server-side errors in just a couple of clicks - enabling you to quickly fix errors without the need to count tedious lines of code... and let's be real, who has got time for that when you're under pressure to fix this bug? 

It's simple and straightforward to use:

1. Click on