We use ExecureProcedure() to execute a stored procedure which returns a result set. But we see lot of "Invalid cursor state" errors when the result set is empty.  The connection to SQL server database is made through ODBC. 

ERROR #6022: Gateway failed: Fetch. + ERROR <Ens>ErrGeneral: SQLState: (24000) NativeError: [0] Message: [Microsoft][ODBC Driver 11 for SQL Server]Invalid cursor state 

Here is the code snippet from the business operation class which uses EnsLib.SQL.OutboundAdapter  

00
0 2 1,012

version cache for windows, 2017.2.1 build 801_3 - windows 10

I had this system set up for 3+ years now, and background tasks such as converting emails,  have always worked, suddenly it's stopped working and I've tracked it down to any network references.

reading the emails, I look for any attachment files, and save them to a network drive before processing them within a class method,

I've been testing it by sending exactly the same email repeatedly and checking the saving of the attached file in both the background and in the terminal.

00
0 11 160

Hello there,

Someone know which impact would have my database changing the locale and its collationTable? I understand it should works fine, without any drawback.

Could someone else confirm my assumption or tell me what could happen? Has anyone changed something like that? (Not to russian, japanese, chinese, etc..) 

 About queries.. is there any side effect? 

Regards

00
0 1 63

I'm looking for the best strategy for extracting data from a Cache table that houses 86 Million lines of data and around 190 columns. I'm currently using DBeaver and the Invoice Service dates go back to 1996. Optimistically I'm looking to pull to a pipe delimited flat file, but even a year's worth of data takes many hours to get query results.

Any suggestions for the best practice/strategy?

 

Thanks,

John

00
0 2 100
Question
Virat Sharma · Oct 18, 2020
XML string query

Hi,

I am stuck with simple logic. I have a below string 

set a="<Name>ABC</Name><RollNo>45</RollNo><Name>XYZ</Name><RollNo>66</RollNo><Name>xyz</Name><RollNo>89</RollNo>"

I need logic to replace the values of roll no with "***". Is there any single command which can help in this scanerio.

I need to store this value in database after replace.

Thanks

 

 

00
0 6 186
Question
Fanny Van · May 16, 2018
Collect TrakCare's datas

Hey everyone, 

Here's my issue, I would like to develop a web application which use and send datas to TrakCare app, but I really don't know how to communicate with TrakCare's datas. 

With a little research, I think I could use "RESTForms" or "EnsembleWorkFlow" but I don't really get how...

Can somebody help me and tell me the way forward ?

00
0 3 251

Hello,

I am trying to create a HL7 message (REF_I12 message) using variables extracted from a Dynamic Object and need some advice about segment creation issues that I am having. Some background info: I receive a JSON response from an API call and used %FromJSON to convert the response to an Dynamic Object. Some of the items in the response are repeated such as NOKName, NOKrelationship.

00
0 3 163
Question
Davidson Espindola · Mar 3, 2017
zen report

Hi, all

I have the following problem in generating a PDF report in ZEN, which has many items, a general total of approximately 30,000 items, but gives an error, I can generate a report with a maximum of 8,000 items, which may be wrong.

10
0 4 1,065

In MS SQL Server i can do this:

SELECT 
Category, CrewNumber, MedicalCertificationDate, Seat, SeatbeltUsed, Sex, ShoulderHarnessUsed, ToxicologyTestPerformed, childsub
INTO #tempfemale
FROM Aviation.Crew
WHERE Sex = 'F'

00
0 8 342

Hi

 

I would like to create a new message of a particular type and append various segments programmatically.  I have started with the following snippet.  What I am currently finding difficult is to define a segment of a particular segment structure.  I would like to append a pid segment of 2.3.1 to my message.  I know I could you the importfromstring but I wanted to know whether there was a better way of achieving this.

 

00
0 2 133
Question
Ruslan K · Oct 1, 2020
Terminal error

Hello!

I have installed windows 10 and cache 2018.1.0.184.0

I run terminal not from cache cube but through localDemon.exe (for report outputting from my programs to excel).

All worked fine but after some time error occured "Cannot load supporting modules"  (in attached file) and localDemon.exe is not launching.

But terminal from cache cube is still launching without problems (but from it reports are not working, localDemon.exe is required)

00
0 2 131

Whenever the Windows SNMP Service restarts, the snmpdbg log says the following.  

16:58:25 :Debug tracing enabled for SNMP agent
16:58:25 :SnmpExtensionInit called, pid=4432, tid=12276
16:58:25 :CreateEvent for CacheSNMPTrap suceeded
16:58:25 :register Cache OID 1.3.6.1.4.1.16563.1
16:58:25 :Get all Cache configs ... 16:58:25 :found 1 configs
16:58:25 :Add ENSEMBLE config to list ... 

00
0 4 104

I've run into an issue where job IDs are being retained through multiple calls. My team is doing a rewrite of our system that allows VB6 apps and web apps to directly interact with our Cache databases.

The new process has those applications calling into a WebAPI which then calls into the routines.

00
0 2 129

Hi:

I have the following method in a buisness operation that works on localhost but not on our server . I think it's how the firewall is set up but i was wondering if there is a known way around this. It can't correlate XML as it returns a "The browser did not send any authentication information" error. I tried adding in username and password to http request to no avail. We could do a c# proxy on a server but i'm wondering if there is a known way to fix this error within intersystems. As a developer we don't have too much control over our Intersystems TIE server. 

00
0 1 92

Whenever the Windows SNMP Service restarts, the snmpdbg log says the following. 

13:08:59 :Attempting initial TCP connection(s) with 1 Cache instances ...
13:08:59 :Get connection with ENSEMBLE on port 1972
13:08:59 :Connection refused on port 1972, check if Cache instance ENSEMBLE is started.
13:08:59 :Cache iscsnmp.dll initialized for 1 configs

Ensemble and all productions are running. I've set up Caché SNMP agent on many other servers in our company and those are working fine. However this one server won't budge. 

00
0 10 767

I am trying to create a Procedure in Caché, but this message is showing:

<UNDEFINED>frmit+118^%qaqpsq *mt("v",1)

This is the procedure:

CREATE PROCEDURE testebi.sp_cargainicial()
BEGIN
    INSERT INTO testebi.Fato_Atendimentos (
    PK_OsProcedimento )
    SELECT ID
     from dado.TblOsProcedimento    ;    

00
0 2 111
Question
Keith Davis · May 31, 2019
Indices Not Working

Forgive my lack of understanding, but I am working on a vendor created Cache database and the indexes specified in the classes for ODBC connections are not working. A few of them are created, but of the 50+ classes we have, only a handful of them are created when the class is compiled, yet no errors occur.

Example 1:

 

Example 2:

 

00
0 21 536
Question
OMAR ATEEN · Sep 2, 2020
hijri date

Hello all

How can I convert cache date to hijri date format in object secript.

please help.

00
0 8 130

Dear,

I am beginner with this system.

I would like to do a migration of Cache.

I have at this time a windows XP with Cache 2007.1.5.802.0.7279.

I already install on a windows 10 the version of cache 2017.1.1 Build 111

The question is how do i have to transfer DB from the old pc to the new one?

Thank you very much for your help.

 

 

00
0 5 505