New post

#Business Operation

4

InterSystems Ensemble provides specialized business operation classes that use specific outbound adapters to communicate with external systems and UI.

Documentation.

I am trying to figure out how to send a Page via a HTTP.OutboundAdapter to a URL from Ensemble.

We have a URL that I am able to pass PNo=xxxx%PMsg=xxxx as parameters to send the page to a pager.

http://xxxxx.xxxxx.xxx/Employee/Tools/Paging/SendPage.aspx?PNo=1817&PMsg...

When I send the above URL through a REST client I receive a Response of "SENT".

But when I try to send it through the HTTP.OutboundAdpater I do not get a response.

0 3
0 278

So now that I have figured out how to send a Page via HTTP.OutboundAdapter, I have another question. I want to use a Function that all I have to do is pass two variables and it is sent to the HTTP.OutboundAdapter I created to send the Page.

So.. If I have a class file that Extends Ens.Rule.FunctionSet, how do I force it to send a Request to my HTTP Business Operation, without having to go through a DTL, or Business Process?

Thanks

Scott

0 3
0 711

Hello Community,

I am still pretty new to Ensemble, Cashé, or ObjectScript. My question is this how can I tell when a file was finished and read fully? Currently, I have an EnsLib.FilePassthroughService reads a file from a designated file path and moves it to an archive file path. I need to set up an alert or a notification that can tell me once the file has been read in its entirety and has been moved out of its current file path.

0 3
0 248

Hi,

I have a production with a BS calling a BP calling another BP and so on and finally a BO. All calls are made using SendRequestSync.

The initial request is passed by value. The response is passed by ref and I allocate memory for it in the BO, hoping that it will go back to the initial caller in the BS, but it does not.

It looks like the following:

0 3
0 374

Hi i have rules and i want to log them to analyse what rules executed , I want to add in the log Msg Controller Id, MRN, Value coming in the message, and my customize text telling whats wrong with this field... i have like 50 rules and at the end i can check the log table and found like 20 entries so it means 20 data issues are there for a given message control id. any advice how to to do it

0 3
0 272

Recently we have exercised this with a partner. It may be helpful for others as well.

The basic functionality is to connect to SAP through SAPJCo (Supporting SAPJCo 3.07+).

As a first step have a production with at least two items of the following type:

  • EnsLib.JavaGateway.Service
  • EnsLib.SAP.Operation

Configure the settings for the Java Gateway and the SAP Operation accordingly. And start the production.

1 2
1 1.1K
Question
· Jul 17, 2017
Purge for "IO Log Input Data"

Hello mates,

When turning on the “Archive IO” option within the business operations, it provides us the capability of seeing the input and output communication with external systems. For instance, watching the messages sent out + ACK message sent back .

Our production has got a scheduled task that runs daily (by default I guess, as many others) and is in charge of purging “Errors and log files”. And this is likely to be linked to the “Archive IO” feature, right?

0 2
0 550

I'm having trouble accessing the snapshots EnsLib.SQL.Snapshot in %Library.ListOfObjects that are returned from method ExecuteProcedure in EnsLib.SQL.OutboundAdapter. The Microsoft SQL stored procedure I am executing returns multiple resultsets.

The issue I am having is that my code works fine when executed in the business operation (commented out in the code below) but when it is executed in the business process it errors. Any ideas as to why this happens? The error I get is:

0 2
0 616

We use ExecureProcedure() to execute a stored procedure which returns a result set. But we see lot of "Invalid cursor state" errors when the result set is empty. The connection to SQL server database is made through ODBC.

ERROR #6022: Gateway failed: Fetch. + ERROR <Ens>ErrGeneral: SQLState: (24000) NativeError: [0] Message: [Microsoft][ODBC Driver 11 for SQL Server]Invalid cursor state

Here is the code snippet from the business operation class which uses EnsLib.SQL.OutboundAdapter

0 2
0 9.6K

Introduction

Say you have a receiving system that accepts HL7 and provides error messages in field ERR:3.9 in the ACK it returns. You require a different reply code action depending on the error message, however the Reply Code Actions settings for the operation do not provide this level of granularity. One option could be to create a process that takes the ACK and then completes the action you were expecting, however things can get a bit messy if the action is to retry the message, especially when trying to view a message trace.

9 2
1 733

Hello community,

I have productions running in several different namespaces. They all use a common credentials ID for sending email, which is set up in only one of the namespaces. The documentation says that credentials are entered by namespace. When I ran a production in a second namespace, the error log said that credentials were not found (expected), but later attempts to send a file thorugh the production did successfully send an email. I'm wondering if Ensemble is able to look in other namespaces for the same credentials ID?

0 2
0 830

Hi guys,

I have a technical question. I have a Ens.BusinessOperation which contains a main method with parameters "In" As Ens.StreamContainer and Output "Out" As Ens.StringContainer. Return type is %Status.
Can this method just do "Quit $$$OK"?.
Currently this BO is used for see messages in Full Trace View.
It is a correct way to proceed?

Thank you

0 2
0 462

This short article was motivated by a problem of one of my customers. They use Ensemble to integrate many systems, some of them use just plain files.

So they naturally selected File Outbound Adapter to write into target file. Things were running smoothly for years, until recently, when the volume of data being written to the file reached large size of tens of megabytes. The operation took around half an hour to complete, causing timing problems where subsequent operations within the process had to wait, and third party system was not happy to wait so long.

13 2
0 783

Running predictive models natively in an InterSystems IRIS Business Process has of course always been the goal of our PMML support, but somehow never made it into the kit because there were a few dependencies and choices that needed addressing and answering. Anyhow, thanks to some pushing and code kindly provided by @Amir Samary (Thanks again Amir!), we finally got it wrapped in a GitHub repo for your enjoyment, review and suggestions.

1 2
3 465

I am trying to use EnsLib.SQL.Operation.GenericOperation for retrieving (multiple) rows. But I am looking for a way to handing a StreamContainer returned by the operation, in my business process such as receiving it in the Context object and packing it to a request to call another business operation.

Does anyone have sample code to do this?

Thanks.

1 2
0 263

Git link: https://github.com/ecelg/InterSystems-IRIS-as-a-Spotify-REST-client

Recently, I come up an idea in my mind that how can I put my playlist on IRIS.🧐

At the same time, I was told to pay for my Spotify subscription💸💸... ooo.. how about to get some data from the Spotify API... so I started to do study about it.

4 2
2 191
Question
· Nov 7, 2019
Webservice Response Changes


Hello,

I loaded a WSDL from a webservice into my project where executing it returns me a series of Orders related.

My problem is that the provider of this webservice sometimes adds new fields, which I don't even use, and from then on it starts giving Iris a bug, so I need to import the updated WSDL again so that it creates the new property that the provider added.

0 2
0 509

maybe I am not looking in the correct spots, but how should one handle an Exception from a SOAP web service within the Business Process Language? For example I am sending a request to a Web Service to try to get information, but the response I am getting is an Exception like "Patient Not Found".

Is there a function I can call to check the response similar to what I do to check a SQL Snapshot to see if it is valued?

Thanks

Scott Roth

0 2
0 728

Goal:

  • Take an HL7 message, parse some data from it
  • Call a web service to get an authorization key, comes back as a simple string
  • Create a request object with data from the HL7 message and send it to the Web Service

The main web method call requires that key I received as a Soap Header element. All I can pass to the SOAP Operation business class is the request object with the data I plucked from the HL7 payload. Nothing in that particular request message has anything in it that tells anything to send the header, too.

0 2
0 1.2K