#Business Operation

Hello. 

I'm trying to POST a JSON on an URL. 

But the body request arrive empty on the web service : 

[DEBUG] # 2022-05-05 15:04:32,966 # scopes founds : api
[DEBUG] # 2022-05-05 15:04:32,971 # PatientController:PostSignaletic object null

Here is the code, i tried a TONS of ways to do it but i'm still in trouble ... 

Method SendSignaletique(Token As %String)
{
    //set UrlPats = "https://app.

I am trying to explore some new possibilities outside of the normal day to day HL7 interfacing we do. I have only done 1 other Web Service interface but it was using a SOAP proxy wizard. Now I am tasked with trying to make a call to an external API 

https://npiregistry.cms.hhs.gov/api/

but I am a bit confused about how to go about doing it. Since they don't have a wsdl, this means it is a REST web service correct? or is it considered an API call?

I have a service that takes a file and pass it through to the production .While I am passing the file through I get the file stream and set it to a variable within my message and the variable is of type %Ens.StreamContainer. But after all processing and I need to write out my file to a pdf format The file gets written but is a corrupt file since I can not read it I have tried this with asimple pass through everything is fine .But here I do not know what I am doing wrong here is the operation code

 set pInput=pRequest.

I have a requirement to update the Ensemble Host Settings Programmatically.  Mainly the  "AlertOnError,QueueCountAlert,QueueWaitAlert,InactivityTimeout" settings.
I used Ens_Config.Item (persistent) class to get the settings (list object) and then update it. But for some of the Business Host's, I dont see the above settings in the table, but present in Settings of that particular Host in Ensemble Management Portal. So my logic is not working.

Why is that and how to write a code to update the above settings for all the hosts ?

Please let me know the way to achieve my requirement.

My code.

Occasionally I see a production item with a little 2 flag.  When it has that, there is an "Item" dropdown.  What does this mean?

Can you connect to FHIR through ensemble or do you have to have HealthShare to connect to FHIR services?

I am looking for samples for integrating Ensemble and RabbitMQ. Any pointers appreciated.

Best,

Harish

I have a case where our EMR is sending data, but not all the values needed for the Ancillary are valued properly and causes that message to error/halt processing on the Ancillary system, not ideal but its what they do. I would expect them to still process the message except that 1 field, but they don't.

I want to add validation to make sure certain fields are valued correctly for the Vendor. 

So I add some statements to take those items that don't pass this validation out to a batch file with headers.

But I want to email out that batch file.

Hi guys have an operation that I would like to write the results from the results set to a csv file but have been struggling to get it to work here is my code so far and also here is the error that I get when I try to test this operation using the testing on the ensemble

error:

An error was received : ERROR <Ens>ErrException: <COMMAND>zMessageHandler+6^DQTools.DQTOpp.1 -- logged as '-' number - @' Set tSC=..CheckRequests(.pRequest,.pResponse)'
 
code:

 set file = ##class(%Stream.FileCharacter).%New()
 set fileName="C:\File\99_Testing\123.txt"
  do file.

In my Business Operation I need to execute a bookkeeping method every X seconds.

How can I do that?

There are two workarounds (I dislike both):

1. Execute bookkeeping on process start - but there might be no requests at all
2. Create a BS that sends messages to BO every X seconds - it makes production more complex and also queues might not guarantee that the method is executed on schedule.

Thoughts?

Hello,

Working on to learn very basic CUSTOM Business Service which sends to a  EnsLib.File.PassthroughOperation.

But operation is not writing to File and erroring out (No Stream contained in StreamContainer Request")'.

How do convert the object to STREAM and wrap in the StreamContainer so the operation does not error and write to a file.

Thanks.

Persistent Class

Class Hospital.PatientApptRequest Extends %Persistent
{
Property PatientId As %Stream.FileCharacter;
Property PatientName As %Stream.FileCharacter;
.

Hi,

Is there a way to send certain message based of source into top of the queue of business operation.. so that that message will processed right away.

I created the Process to extract the required data from ADT message to a Dynamic Object. I wanted to send the JSON stream to EnsLib.File.PassthroughOperation operation and generate a file with the content of JSON stream.

Here are the codes for Process:

set oMetadata = ... /// metadata is from ADT message which is dynamic object

set jsonRequest = ##class(%ZEN.Auxiliary.jsonProvider).%ObjectToJSON(oMetadata)
set tSC = .SendRequestAsync(.

Hi,

I'm getting mad trying to get data from an external REST service that uses Basic Authentication from Ensemble. The BO worked fine when I was using a test server without authentification, but as soon as we need to go to production I cannot have it working.

So far, I've created the username/password at the credentials page (Ensemble-Configure-Credentials). I've setup the BO to use this credentials. But nothing happens.

I've tried with the Rest Client (addon for Mozilla), and using the same address, port and user/pwd works just fine.

Hi

Made a request for API REST.

Using HTTP Request adapter.

Adapter As EnsLib.HTTP.OutboundAdapter

Outside the Ensemble an API response is JSON (CORRECT)

Answer in Ensemble: =?Á
Â0 
?_eä,cÒ
'=
*^<YÙF¡í$í¼ÈÞÝt 
oÉ÷ý$?|
¤1¡{Dâhà°Ý?Öù)2ós??R?¸¼?ºd?$,ñD+»??
? 
ÔºQZéýNÕ V{C?óò?b¢?éÍ )$ 
²5Å?wEë? ??©tÖã1z×2FëÊnôeË æ??]Zßq ܺ?á

Help me.

Thank you

Hi All,
I created a Business Operation to Integrate with Amazon S3.
I have used HTTP Outbound Adapter for the same. Used Get method of Adapter Class.
Basically in a request I want to send Unique File Name and File and in Response I want to get Version ID and if operation was successful, then set flag to true.
I have created a class for request in that I have two properties, as shown Below :
   

    Property fileName As %String;
    Property file As %GlobalBinaryStream;
This is in my Operation Class
 

            set pResponse = ##Class(SaveFileResponse).%New()
            set fileName = pRequest.

Hello everyone

We are facing what seems to be a network problem while transferring HL7 messages from Ensemble/Healthshare to a distant target through TCP/IP.

Here is the version of the system in any case it could be useful: Cache for Windows (x86-64) 2017.2.1 (Build 801U) Wed Dec 6 2017 09:07:51 EST [HealthShare Modules:Core:14.02.2415 + Linkage Engine:15.03.9901]

Then the configuration of the operation:

NB high numbers for Read- and Response-Timeouts come from "long" transfers occuring sometimes, e.g. HL7 messages with about 600 segments, successfully transferred if we let them this "long" time.

I am trying to transform an Enlib.EDI.XML.Document through aXLT I know how to trans form the xml document  through a xlt stylesheet but been trying to get an Enlib.EDI.XML. Document from a procees by creating aoperation that will do the transformation of this to file if this can be done in a process all ideas welcome  so far I have come to this and I keep getting an error

:ERROR{ERROR #5002: Cache error: <PROPERTY DOES NOT EXIST>zXMLTOJson+6^TestEnvironment.Custom.GENERAL.CUSTOM.XLT.XMLToJsonOperation1.1 *Parameters,EnsLib.EDI.XML}

Class XLT.XMLToJsonOperation1 Extends (Ens.

Hi,

I have a HealthShare HealthConnect operation which uses the EnsLib.HTTP.OutboundAdapter. It is using a custom Operation class to send HTTP Post request. The request data that is sent to the operation and the response back from the operation is not  displayed on the visual trace. Is there anyway to display this data in the trace? 

Thank you for your help. 

Hi, We recover a large amount of data from an external database (SQLServer, about 1 million rows in JDBC).
However, we have treatment time issue.
This process takes more than 30 minutes whereas on a "classic" SQL Server Management Studio type request takes less than a minute.

While searching on the internet, I came across this article: http://makejavafaster.blogspot.com/2015/06/jdbc-fetch-size-performance.html
It explains how in Java, we can tweak the FetchSize parameter of the JDBC driver to optimize this kind of process.

Is there a way to access this JDBC parameter through the EnsLib.SQL.

I am developing a business operation that receives a request, creates a message with the data contained in it and sends it to an outlook email. For testing purposes both the sender and the destination are the same email account
This is the code:
Class BO.AlertEmailSender Extends Ens.BusinessOperation{

Hello!

This may seem a bit strange, but I'd like to make a business operation which would put a file via SFTP and then confirm that the filesize on the remote server is consistent with expectations.  I am thinking either of a custom copy or extension of the adapter (right now it is using EnsLib.FTP.OutboundAdapter) that overwrites method PutStream, or a version of the FTP.PassThroughOperation with a customized method OnMessage that does the check after the PutStream completes OK-- but I am uncertain of how exactly to modify either method to make the check.

Hi,

I have a process in which i call a rest operation in a while loop, get a response in JSON format of 50 issues, with paging, meaning this call will happen until the total amount of issues will be returned. each JSON is parsed into a proxyObject, and inserted to a list. later the entire list will be sent to an SQL operation which will write the data in the appropriate tables.

The problem i'm encountering, is when i use the "ASSIGN" action, with insert at a certain key (context.i=context.i +1  for each iteration of the loop), i get an Error  that says that the value 3 is invalid key.

Hi all,

Sorry to bother

I have a Business Object with SOAP.OutboundAdapter and it gets the response from a WebApi.

Following the sample Creating REST Services and Clients with Ensemble - Developing a REST Operation, I've done the call and it retrieves a JSon with the information. The result is a JSon with a Base64 content (at least 15000 bytes)

I've put a trace to check the content  with $$$TRACE(tHttpResponse.Data.Read() I have a cut result (to 1200 character), so the JSonStreamToObject is not able to allocate the full result into a object.

Hi

I am fairly new to Ensemble development.

I was wondering what is the best process of returning the resultset from a SQL outbound adapter to the BPL that had invoked it.

Thank you for your help.

Kind Regards,

Salma

Hi Community,

Is there a way to call HL7 Data transformation directly from Business service without using Rule functionality in the production

In this scenario i need to call a data transformation in directly in business service and give the transformed message to Business operation 

Please share if you have any ideas to implement this.

Thanks,
Smythee

Hi, I’m trying to setup a Business Operation where the Property is a drop down list of Strings.  I was able to produce the desired effect but only using a hard coded list like Property LookupProp As %String(VALUELIST = ",value1,value2").  Instead I would like it to be populated from lookup table so I created a method to use SQL to fetch the result set from a Lookup table and then return it as the desired string. But doesn't allow me to do declare the property using the method like this: Property LookupProp As %String(VALUELIST = ##class(MyClass).

Hi:

Sorry I can't find the correct documentation for this. It's very simple I think. 

I open up an XML reader class and correlate the XML to a message type. 

My XML will read something like 

This gets correlated into a message with the following property 

Property StatusLastChecked As %String(XMLPROJECTION = "element");

I can use the following to get the other properties out 

i.e.  docs.RelayedDocuments.GetAt(i).

Hello,

We would like some help:

We have found that in the following code:

Class Operaciones.SOAP.Gasometros.GestionPacientes.SeleneHL7Service Extends Ens.BusinessOperation [ ProcedureBlock ]
{

Method operacion(pRequest As Mensajes.Request.GestionPacientes.operacionRequest, Output pResponse As Mensajes.Response.GestionPacientes.operacionResponse) As %Library.Status
{
 Set .Adapter.WebServiceClientClass = "WSCLIENTE.GestionPacientes.ConsultaCandidatos"
 Set MSH=pRequest.MSH,SFT=pRequest.SFT,QPD=pRequest.QPD,DSC=pRequest.DSC
 Set tSC = .Adapter.InvokeMethod("operacion",,.MSH,.SFT,.

Hi I'm hoping the community will once more help me out with a question!

Right I have a production that takes an attachment from an email and processes it, sending out a hl7 message at the end. This works ok.

Now I just need to take the email and send it back out to a 'backup' email address, basically giving
a) A backup incase there is a problem with the email or something else further down the line.
b) A log of the emails receieved.

So I thought the best thing to do is have an operation with an email adapter and to send that my message.

That gave me some code that's basically like this.