Syndicate content 0  
 
All time
Hello and welcome to the January 2025 Developer Community YouTube Recap.
InterSystems Global Summit
By Jon Sue-Ho, Senior Security Engineer, InterSystems
By Murray Oldfield, Mark Bolinsky
InterSystems Package Manager
By Timothy Leavitt, Bob Kuszewski
Containers & Kubernetes - Proper Use and Lessons Learned
By Mark Bolinsky, Ari Glikman, Bob Kuszewski, Kai Zou
Moving to InterSystems Reports
By Eric Hoelper, Michael Braam
1 0
0 83

I'm fairly new to InterSystems and I've been tasked with building a portal that can show DataCheck States among other details, the GetStateBySystem seems to be fit the bill but I don't see a why to call directly from the .Net SDK. I tried sql and can get data from the table but does include "state" information ("starting, stopping, running etc..."). I did find github example around .Net but none fit the bill. If anyone can point me to the right example or documentation it would be greatly appreciated.

Thank you,

0 0
0 83

I have a Postgres table which should be migrated to IRIS. The table has a computed column, like:

CREATE TABLE example_table (
    id VARCHAR(10) PRIMARY KEY,
    normalized_id VARCHAR(10) GENERATED ALWAYS AS (LPAD(id, 10, '0')) STORED
);

IRIS also has the LPAD function but I can't figure out how to achieve the same result using pure SQL DDL.

Tried this:

0 7
0 75

Hi everyone, on HealthShare Unified Care Record 2024.1.0 Build, we're using the Analytics section to create a dashboard containing a time chart showing a cumulative curve of the number of documents indexed in the registry for each documentSource of each repository. We tried the following steps: we created a cube whose dimensions are the CreationDate, SourceValue, and repositoryUniqueID of the HS_Registry.Document table; in the Analytics section, we created a pivot table that lists the document creation date on each row, along with as many columns as each repository's documentSources.

1 4
0 78

#InterSystems Demo Games entry

⏯️ Being READY to Tackle Healthcare Enterprise Challenges in a Few Clicks

Managed Cloud Solutions to Help Streamline Your Health Services.

This demo showcases composing several InterSystems Managed Cloud Services to solve various use-cases.

The video is actually built of 6 short chapters (each ~2.5 minutes long) showing each part of the story, demoing a different service.

You can watch each "chapter" individually if you're interested in a specific service, but there is value in viewing the whole composition and observing the full flow.

  • 0:00 Health Connect Cloud - Medical Device MQTT - HL7v2 for Hospital Operation Systems
  • 2:29 FHIR Server & FHIR Transformation Service - HL7v2 to FHIR & Repository for Regulation & Exchange
  • 5:21 FHIR SQL Builder - Providing standard relational access to FHIR data
  • 7:22 "FHIR IntelliChat" (see note below) - Natural human language chat with FHIR Server
  • 9:37 OMOP Solution - FHIR to OMOP transformation & OMOP database with OHDSI tools compliance
  • 12:54 InterSystems Data Studio for Health - Creating a multi data/app sources fabric

[Note the "FHIR IntelliChat" part is not an actual formal InterSystems service, it is just a demonstration of a possibility (based on this solution by @José Pereira) ]

Presenters:
🗣 @Tani Frankel, Sales Engineer Manager, InterSystems
🗣 @Keren Skubach, Senior Sales Engineer, InterSystems
🗣 @Ariel Glikman, Sales Engineer, InterSystems

https://www.youtube.com/embed/MM7GS4z3W5Y
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

16 0
0 82

As part of a recent documentation technical project to optimize the search, I needed to use Embedded Python in my ObjectScript code. The main blocker was passing a Python list from a Python class method to a ObjectScript method. Sending the list by reference to the python method, populating it with the Insert() method, and returning the reference to the ObjectScript method resulted in an list with type %SYS.Python, a process that was straightforward but not efficient.

2 0
1 82

I am testing vectorsearch, while doing so I am trying to paginate my resultset for a "next page" function to give me the first, second, third 15 entries within a table.

For this I have two embedding classes. One with a HNSW Index (vectornomicembedtextlatest) , and one without (vectornomicembedtexttest).

Calling SELECT ID,PRIMKEY FROM SQLUser.vectornomicembedtexttest LIMIT 5 OFFSET 1 works fine with the first entry having the rowID of 486448. (I deleted old entries in the beginning and reused the table)

0 0
0 82
Question
· Mar 27, 2025
Generic route

I'm working with routes for a rest service with intersystems iris. I have a working /test path, but I want to create a regex that accepts any path passed after /test. example /test/sdjklsbdk or /test/sdfkjgbskdbf/skjbksdb/ksdjbdks

I used <Route Url="/test/(.*)" Method="POST" Call="test"/> and <Route Url="/test/:path" Method="POST" Call="test"/> and I got the error <PARAMETER> what could it be?

{

"errors":[{

"code": -5002,

"domain": "%ObjectErrors",

0 2
0 80

Hey Community,

Play the new video on InterSystems Developers YouTube:

⏯ Human Centered AI: Shaping a Just and Ethical Future in Health Technology @ Global Summit 2024

https://www.youtube.com/embed/pdHuGXn5iak
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

0 0
0 82

Hey Community,

Here is a digest of the Developer Community videos on InterSystems Developers YouTube Channel in October 2024:

New Videos
№ Video Views
1 Fine-Tuning - second step of #GenAI model training 3441
2 General idea of fine tuning the GenAI model 3295
3 General idea of fine tuning the GenAI model - Part 2 713
4 Second pre training task of GenAI model training solve masked sentence 587
5 Third pre training task of GenAI model training predict next sentence 438
6 General idea of fine tuning the GenAI model - Part 3 188
7 Accelerate DTL Coding with AI Cloud Service 101
8 How We Used AI to Build Faster Sell More and Support Better 88
9 Smart Data Fabric for Generative AI Readiness 74
10 Using LLMs with InterSystems IRIS Interoperability Productions 59
11 Online Meetup with the Winners of the Developer Tools Contest 2024 55
12 Using AI to Automate and Improve Resident Funding in Nursing Homes 53
13 Securing AI Implementations - Moving from Experimentation to Production 22
14 Using Character Slice Index in InterSystems IRIS 16

0 0
0 82

We've just started using Health Connect and I've found that a lot of the messages we get from our patient admin system (System C's CareFlow EPR) don't match the standard 2.3.1 schema (eg 2.3.1 ADT A02 message spec doesn't include NK1 segments, but the ones we receive do)

Does anyone have a custom schema they use for messages from CareFlow EPR that they'd be willing to share?

0 0
0 82

We are trying to mark a hl7 nack as "completed" to ignore an error and not generate the alert.

We can remove from adding a managed alert or add another router in

When Nack of CR of

Date of birth in PID.7 must not be empty

We tried via this but i think it's only for an actual IRIS alert errror not the HL7 error code/description

E*Date of birth in PID.7 must not be empty=C,:?CR=C,:?R=RF,:?E=S,:~=S,:?A=C,:*=S,:I?=W,:T?=C

0 3
0 78

Hi,

I'm trying to run some scripting in Windows. I'm using an instance of the IRISHealth community.

I'm just trying to run a simple sequence of commands so I can run irissession in a non-interactive mode, like:

irissession.exe IRISHEALTH -U "%SYS" < "myprogram.iris"

The contents of my program.iris are, for instance, these ones, to run an online backup:

1 2
0 79

Hello Community,

When I compile the Sample.User class for the first time, and include an ObjectGenerator method intended to run certain logic during each compilation, it throws a <CLASS DOES NOT EXIST> error. However, recompiling the same class works as expected.

I understand this happens because the class hasn’t been fully compiled yet during the first pass. To overcome this issue, are there any specific callback methods available that can safely be used after the class is fully compiled?

0 2
0 79
Article
· Sep 13, 2025 4m read
Plug-N-Play on Pattern Match WorkBench

Plug-N-Play on Pattern Match WorkBench

Article to announce pre-built pattern expressions are available from demo application.

AI deducing patterns require ten and more sample values to get warmed up.

The entry of a single value for a pattern has therefore been repurposed for retrieving pre-built patterns.

Example: Email address

Paste an sample value for example an email address in description and press "Pattern from Description".

Open Exchange app
3 0
0 81
Question
· Jul 25, 2025
Cache SQL - Cached Query error

Hello to all the Cache Experts out there and Happy Friday!

The company I work for uses Cache 2017.1.3 and we have been seeing intermittent errors in the Cache Error Trap when an SQL query runs. The error message looks like the error is occurring within the cached query routine that Cache auto-generates. Unfortunately, when I pulled up the routine in the SMP System Explorer, I only found an obj version, so was unable to look at any code.

0 3
0 78

Hi Community,

Watch this video to learn about Shift's new Data Platform architecture, combined with the InterSystems IRIS roadmap for data management:

⏯ Shift Data Platform: The IRIS Roadmap Applied @ Global Summit 2024

https://www.youtube.com/embed/-kDYPsLqrzA
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

3 0
0 81

Hi, Community!

Do you have HL7® V2 messages that you need to convert to the HL7® FHIR® format for better integration and analysis? See how the InterSystems FHIR Transformation Service can help:

Using the FHIR Transformation Service with AWS HealthLake

https://www.youtube.com/embed/ggf6yuV0FxE?utm_source=youtube&utm_medium=social&utm_campaign=ggf6yuV0FxE
[This is an embedded link, but you cannot view embedded content directly on the site because you have declined the cookies necessary to access it. To view embedded content, you would need to accept all cookies in your Cookies Settings]

0 0
0 81

Hello,

We are doing the hl7 integration migration from cloverleaf to InterSystems Healthshare. so I have an application has workflow like below, and I am seeking the suggestion of the workflow in InterSystems HealthConnect cloud version.

The current application has workflow like this.

1. local server has Cron job every night to create about 10 files with specific name and next day's timestamp in file name with a dummy word in it and the files located in local cloverleaf server. pretty much 1 facility per file, file name has facility name and timestamp in it.

0 0
0 81

Hey Community,

Here is a digest of the Developer Community videos on InterSystems Developers YouTube Channel in August 2024:

New Videos
№ Video Views
1 What is RAG? (Retrieval Augmented Generation)Amazing LLM System for Enhanced UX #ai #chatgpt #shorts 14755
2 InterSystems IRIS: What's New & Next 109
3 Leveraging Developer Ecosystem Tools for Success 62
4 SQLzilla – Unleash the Power of Your Data 57
5 How Netsmart Moved to InterSystems IRIS in the Cloud 56
6 HealthShare Deployment Automation at Warp Speed 55
7 Updating Legacy UIs for Modern Browsers - Lessons Learned & Steps Forward 53
8 Introducing Managed Solution for Asset Management 38
9 CommonWell Connection 29
10 Winners of the InterSystems Python Programming Contest 2024 28
11 SQLZilla in action #shorts 26
12 Online Meetup with the Winners of the Python Contest 25

0 0
0 81

Hi Everyone!

We have an existing process (running in FIFO order), all business hosts having pool size=1.

Currently we are reading records from a file (one record at a time) then that record goes to business process for further processing and finally through the business operation. As of now we are using synchronous call in our existing code. Before processing the last record we are using hang of 50 seconds because we need to initiate a batch once the processing of last record is finished.

0 5
0 75
Question
· Aug 20, 2025
SOAP.OutboundAdapter question

Using a WSDL and the SOAP wizard I created a WebServiceClient, and Operation to send an encoded message to a Vendor. But the vendor is now sending back an HL7 in the SOAP response.

I tried updating the Operation to Extend EnsLib.HL7.Operation.ReplyStandard, but still use the EnsLib.SOAP.OutboundAdapter. When I did this it broke my Operation and would not compile with the following error...

0 1
0 79

Embeddedpy-bridge: A Toolkit for Embedded Python

Overview

Embedded Python is a game-changer for InterSystems IRIS, offering access to the vast Python ecosystem directly within the database. However, bridging the gap between ObjectScript and Python can sometimes feel like translating between two different worlds.

Open Exchange app
2 1
2 60

Let’s spotlight the brilliant authors and contributors of our November Article Bounty! 💙
Thank you to everyone who took part and shared their knowledge with the community.

A special shout-out goes to those who created brand-new articles and contributed their expertise — each received 5,000 points 🎉

@Zion Amsalem -- "Consuming REST-APIs for dummies (beginner-friendly)"
@Robert Cemper -- "Network Debugging for Beginners - 1"
@Iryna Mykhailova -- "Connecting C# to InterSystems IRIS via ODBC"
@Vachan C Rannore -- "My experience with APIs and POS integration."
@Padmaja Konduru -- "Production Terminal Commands"

5 1
1 60